| ►Nfmt | |
| Cformatter< T, std::enable_if_t< std::is_enum< T >::value > > | Fmtlib formatter for enum classes |
| ►Ngeos | |
| ►NacousticElasticWaveEquationSEMKernels | |
| CCouplingKernel | |
| ►NacousticFirstOrderWaveEquationSEMKernels | Namespace to contain the first order acoustic wave kernels |
| CVelocityComputation | |
| CPressureComputation | |
| ►NacousticVTIWaveEquationSEMKernels | Namespace to contain the acoustic wave kernels |
| CPrecomputeSourceAndReceiverKernel | |
| CMassMatrixKernel | |
| CDampingMatrixKernel | |
| ►CExplicitAcousticVTISEM | Implements kernels for solving the acoustic wave equations explicit central FD method and SEM |
| CStackVariables | Kernel variables allocated on the stack. |
| ►NacousticWaveEquationSEMKernels | Namespace to contain the acoustic wave kernels |
| ►CExplicitAcousticSEM | Implements kernels for solving the acoustic wave equations explicit central FD method and SEM |
| CStackVariables | Kernel variables allocated on the stack. |
| ►NcompositionalMultiphaseHybridFVMKernels | |
| CPos | |
| CUpwindingHelper | |
| CAssemblerKernelHelper | |
| CAssemblerKernel | |
| CFluxKernel | |
| CPhaseMobilityKernel | Define the interface for the property kernel in charge of computing the phase mobilities |
| CPhaseMobilityKernelFactory | |
| CResidualNormKernel | |
| CResidualNormKernelFactory | |
| CSolutionCheckKernel | |
| CPrecomputeKernel | |
| ►NcompositionalMultiphaseWellKernels | |
| CSubRegionTag | |
| CElemTag | |
| CColOffset | |
| CColOffset_WellJac | |
| CColOffset_WellJac< NC, 0 > | |
| CColOffset_WellJac< NC, 1 > | |
| CRowOffset | |
| CRowOffset_WellJac | |
| CRowOffset_WellJac< NC, 0 > | |
| CRowOffset_WellJac< NC, 1 > | |
| CControlEquationHelper | |
| CPressureRelationKernel | |
| CVolumeBalanceKernel | |
| CPresTempCompFracInitializationKernel | |
| CCompDensInitializationKernel | |
| CRateInitializationKernel | |
| CTotalMassDensityKernel | Define the interface for the property kernel in charge of computing the total mass density |
| CTotalMassDensityKernelFactory | |
| CResidualNormKernel | |
| CResidualNormKernelFactory | |
| CSolutionScalingKernelFactory | |
| CSolutionCheckKernelFactory | |
| ►CElementBasedAssemblyKernel | Define the interface for the assembly kernel in charge of accumulation and volume balance |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CElementBasedAssemblyKernelFactory | |
| ►CFaceBasedAssemblyKernel | Define the interface for the assembly kernel in charge of flux terms |
| CStackVariables | |
| CFaceBasedAssemblyKernelFactory | |
| ►NcoupledReservoirAndWellKernels | |
| CIsothermalCompositionalMultiPhaseFluxKernel | |
| CIsothermalCompositionalMultiPhaseFluxKernelFactory | |
| CThermalCompositionalMultiPhaseFluxKernel | |
| CThermalCompositionalMultiPhaseFluxKernelFactory | |
| ►NdataRepository | |
| ►CDataContext | |
| CToStringInfo | |
| CDataFileContext | |
| ►CGroup | |
| CviewKeyStruct | Structure to hold scoped key names |
| CGroupContext | |
| CCatalogInterface | This class provides the base class/interface for the catalog value objects |
| CCatalogEntry | Class to hold allocation capability for specific target derived types |
| CCatalogEntryConstructor | A class to generate the catalog entry |
| CCatalogInterface< BASETYPE > | Specialization of CatalogInterface for types with no-argument constructors/ |
| CCatalogEntry< BASETYPE, TYPE > | Specialization of CatalogEntry for types with no-argument constructors |
| CCatalogEntryConstructor< BASETYPE, TYPE > | A specialization of CatalogEntryConstructor for types with no-argument constructors |
| CWrapper | |
| CWrapperBase | Base class for all wrappers containing common operations |
| CWrapperContext | |
| ►NdissipationCompositionalMultiphaseFVMKernels | |
| CFluxComputeKernel | Define the interface for the assembly kernel in charge of flux terms |
| CFluxComputeKernelFactory | |
| ►NelasticFirstOrderWaveEquationSEMKernels | Namespace to contain the elastic wave kernels |
| CStressComputation | |
| CVelocityComputation | |
| ►NelasticVTIWaveEquationSEMKernels | Namespace to contain the elastic wave kernels |
| CComputeTimeStep | |
| ►CExplicitElasticVTISEM | Implements kernels for solving the elastic wave equations explicit central FD method and SEM in the Vertical Transverse Isotropic (VTI) case |
| CStackVariables | Kernel variables allocated on the stack. |
| ►NelasticWaveEquationSEMKernels | Namespace to contain the elastic wave kernels |
| ►CExplicitElasticSEMBase | Implements kernels for solving the elastic wave equations explicit central FD method and SEM |
| CStackVariables | Kernel variables allocated on the stack. |
| CExplicitElasticAttenuativeSEM | Specialization for attenuation kernel |
| ►Nfields | |
| ►Ncontact | |
| CFractureState | |
| CghostRank | Trait struct for ghostRank data |
| CelementVolume | Trait struct for elementVolume data |
| CelementAperture | Trait struct for elementAperture data |
| CelementArea | Trait struct for elementArea data |
| CparentIndex | Trait struct for parentIndex data |
| CparentEdgeIndex | Trait struct for parentEdgeIndex data |
| CchildIndex | Trait struct for childIndex data |
| CruptureTime | Trait struct for ruptureTime data |
| CnormalVector | Trait struct for normalVector data |
| CtangentVector1 | Trait struct for tangentVector1 data |
| CtangentVector2 | Trait struct for tangentVector2 data |
| ►NfiniteElement | |
| ►CConformingVirtualElementOrder1 | |
| CMeshData | Variables used to call the setupStack method |
| CStackVariables | Kernel variables allocated on the stack |
| ►CFiniteElementBase | Base class for FEM element implementations |
| CFunctionSpaceHelper | An helper struct to determine the function space |
| CMeshData | Variables used to initialize the class |
| CStackVariables | Kernel variables allocated on the stack |
| CH1_Hexahedron_Lagrange1_GaussLegendre2 | |
| CH1_Pyramid_Lagrange1_Gauss5 | |
| CH1_QuadrilateralFace_Lagrange1_GaussLegendre2 | |
| CH1_Tetrahedron_Lagrange1_Gauss1 | |
| CH1_TriangleFace_Lagrange1_Gauss1 | |
| CH1_Wedge_Lagrange1_Gauss6 | |
| ►CLagrangeBasis1 | |
| CTensorProduct2D | |
| CTensorProduct3D | |
| ►CLagrangeBasis2 | |
| CTensorProduct2D | |
| CTensorProduct3D | |
| ►CLagrangeBasis3GL | |
| CTensorProduct2D | |
| CTensorProduct3D | |
| ►CLagrangeBasis4GL | |
| CTensorProduct2D | |
| CTensorProduct3D | |
| ►CLagrangeBasis5GL | |
| CTensorProduct2D | |
| CTensorProduct3D | |
| CQk_Hexahedron_Lagrange_GaussLobatto | |
| ►CImplicitKernelBase | Define the base interface for implicit finite element kernels |
| CStackVariables | Kernel variables allocated on the stack. |
| ►CInterfaceKernelBase | Define the base class for interface finite element kernels. (2D finite elements belong to FaceElementSubRegion) |
| CStackVariables | Kernel variables allocated on the stack. |
| CInterfaceKernelFactory | Used to forward arguments to a class that implements the InterfaceKernelBase interface |
| ►CKernelBase | Define the base interface for finite element kernels |
| CStackVariables | Kernel variables allocated on the stack |
| CKernelFactory | Used to forward arguments to a class that implements the KernelBase interface |
| CSparsityKernelBase | Define the base interface for implicit finite element kernels |
| CSparsityKernelFactory | Helper struct to define a specialization of #geos::finiteElement::SparsityKernelBase that may be used to generate the sparsity pattern |
| ►NflowSolverBaseKernels | |
| CMinPoreVolumeMaxPorosityKernel | Kernel to compute the min pore volume and the max porosity in a subRegion |
| CstencilWeightsUpdateKernel | |
| ►NhybridFVMKernels | |
| CCellConnectivity | |
| ►NhydrofractureSolverKernels | |
| CDeformationUpdateKernel | |
| CFluidMassResidualDerivativeAssemblyKernel | |
| ►Nhypre | Contains some hypre-specific functions |
| ►Nmgr | |
| CMGRStrategyBase | Helper struct for strategies that provides some basic parameter arrays needed by MGR |
| CCompositionalMultiphaseFVM | CompositionalMultiphaseFVM strategy |
| CCompositionalMultiphaseHybridFVM | Labels description stored in point_marker_array 0 = pressure 1 = density ... = ... (densities) numCellCenteredLabels - 1 = density numLabels - 1 = face pressure |
| CCompositionalMultiphaseReservoirFVM | CompositionalMultiphaseReservoirFVM strategy |
| CCompositionalMultiphaseReservoirHybridFVM | CompositionalMultiphaseReservoirHybridFVM strategy |
| CHybridSinglePhasePoromechanics | HybridSinglePhasePoromechanics strategy |
| CHydrofracture | Hydrofracture strategy |
| CLagrangianContactMechanics | LagrangianContactMechanics strategy |
| CMultiphasePoromechanics | MultiphasePoromechanics strategy |
| CMultiphasePoromechanicsReservoirFVM | MultiphasePoromechanicsReservoirFVM strategy |
| CReactiveCompositionalMultiphaseOBL | ReactiveCompositionalMultiphaseOBL strategy |
| CSinglePhaseHybridFVM | SinglePhaseHybridFVM strategy |
| CSinglePhasePoromechanics | SinglePhasePoromechanics strategy |
| CSinglePhasePoromechanicsConformingFractures | SinglePhasePoromechanicsConformingFractures strategy |
| CSinglePhasePoromechanicsEmbeddedFractures | SinglePhasePoromechanicsEmbeddedFractures strategy |
| CSinglePhasePoromechanicsReservoirFVM | SinglePhasePoromechanicsReservoirFVM strategy |
| CSinglePhaseReservoirFVM | SinglePhaseReservoirFVM strategy |
| CSinglePhaseReservoirHybridFVM | SinglePhaseReservoirHybridFVM strategy |
| CSolidMechanicsEmbeddedFractures | SolidmechanicsEmbeddedFractures strategy |
| CThermalCompositionalMultiphaseFVM | ThermalCompositionalMultiphaseFVM strategy |
| CThermalCompositionalMultiphaseReservoirFVM | ThermalCompositionalMultiphaseReservoirFVM strategy |
| CThermalMultiphasePoromechanics | ThermalMultiphasePoromechanics strategy |
| CThermalSinglePhasePoromechanics | ThermalSinglePhasePoromechanics strategy |
| ►NinternalRajaInterface | |
| CPolicyMap | |
| CPolicyMap< serialPolicy > | |
| ►NisothermalCompositionalMultiphaseBaseKernels | |
| ►CAccumulationKernel | Define the interface for the assembly kernel in charge of accumulation and volume balance |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CAccumulationKernelFactory | |
| CCapillaryPressureUpdateKernel | |
| CGlobalComponentFractionKernel | Define the interface for the update kernel in charge of computing the phase volume fractions |
| CGlobalComponentFractionKernelFactory | |
| CHydrostaticPressureKernel | |
| CPhaseVolumeFractionKernel | Define the interface for the property kernel in charge of computing the phase volume fractions |
| CPhaseVolumeFractionKernelFactory | |
| CPropertyKernelBase | Define the base interface for the property update kernels |
| CRelativePermeabilityUpdateKernel | |
| CResidualNormKernel | |
| CResidualNormKernelFactory | |
| ►CSolutionCheckKernel | Define the kernel for checking the updated solution |
| CStackVariables | Kernel variables located on the stack |
| CSolutionCheckKernelFactory | |
| ►CSolutionScalingAndCheckingKernelBase | Define the kernel for scaling the solution and check its validity |
| CStackVariables | Kernel variables located on the stack |
| ►CSolutionScalingKernel | Define the kernel for scaling the Newton update |
| CStackVariables | Kernel variables located on the stack |
| CSolutionScalingKernelFactory | |
| CStatisticsKernel | |
| ►NisothermalCompositionalMultiphaseFVMKernels | |
| CAquiferBCKernel | Functions to assemble aquifer boundary condition contributions to residual and Jacobian |
| CCFLFluxKernel | Functions to compute the (outflux) total volumetric flux needed in the calculation of CFL numbers |
| CCFLKernel | Functions to compute the CFL number using the phase volumetric outflux and the component mass outflux in each cell |
| ►CDiffusionDispersionFluxComputeKernel | Define the interface for the assembly kernel in charge of diffusion/dispersion flux terms |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CDiffusionDispersionFluxComputeKernelFactory | |
| ►CDirichletFluxComputeKernel | Define the interface for the assembly kernel in charge of Dirichlet face flux terms |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CDirichletFluxComputeKernelFactory | |
| ►CFluxComputeKernel | Define the interface for the assembly kernel in charge of flux terms |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CFluxComputeKernelFactory | |
| CFluxComputeKernelBase | Base class for FluxComputeKernel that holds all data not dependent on template parameters (like stencil type and number of components/dofs) |
| CPhaseMobilityKernel | Defines the interface for the property kernel in charge of computing the phase mobilities |
| CPhaseMobilityKernelFactory | |
| ►NisothermalCompositionalMultiphaseFVMKernelUtilities | |
| ►NUpwindHelpers | |
| CcomputePotentialViscous | Struct defining formation of potential from different Physics (flagged by enum type T) to be used in Upwind discretization schemes |
| CcomputePotentialGravity | |
| CcomputePotentialCapillary | |
| CC1PPUPhaseFlux | |
| CUpwindScheme | Template base class for different upwind Scheme |
| CHybridUpwind | Class describing the Hybrid Upwind scheme as defined in "Consistent upwinding for sequential fully implicit
multiscale compositional simulation" (Moncorge,2020) |
| CIHUPhaseFlux | |
| CPhaseComponentFlux | |
| CPotGrad | |
| CPPUPhaseFlux | |
| ►NisothermalPerforationFluxKernels | |
| ►CPerforationFluxKernel | |
| CStackVariables | |
| CPerforationFluxKernelFactory | |
| ►NlogInfo | |
| COutputTimers | Base timer category for output operations |
| COutputTimerBase | Base interface for specific output type timers |
| ►NmimeticInnerProduct | |
| CMimeticInnerProductTypeStrings | Struct containing the keys to all the implemented inner products |
| CBdVLMInnerProduct | |
| CMimeticInnerProductBase | |
| CMimeticInnerProductHelpers | Helper struct handling inner product for hybrid finite volume schemes |
| CQuasiRTInnerProduct | |
| CQuasiTPFAInnerProduct | |
| CSimpleInnerProduct | |
| CTPFAInnerProduct | |
| ►NparallelTopologyChange | |
| CTopologyChangeStepData | |
| CTopologyChangeUnpackStepData | |
| ►NphysicsSolverBaseKernels | |
| ►CResidualNormKernelBase | Define the base interface for the residual calculations |
| CL2StackVariables | Kernel variables located on the stack for L2 norm |
| CLinfStackVariables | Kernel variables located on the stack for Linf norm |
| CLinfResidualNormHelper | Utility class to compute the global Linf residual norm |
| CL2ResidualNormHelper | Utility class to compute the global L2 residual norm |
| ►NporomechanicsEFEMKernels | |
| ►CSinglePhasePoromechanicsEFEM | |
| CStackVariables | Kernel variables allocated on the stack. |
| CStateUpdateKernel | A struct to perform volume, aperture and fracture traction updates |
| ►NporomechanicsFracturesKernels | |
| CStateUpdateKernel | A struct to perform volume, aperture and fracture traction updates |
| ►NporomechanicsKernels | |
| ►CMultiphasePoromechanics | Implements kernels for solving quasi-static multiphase poromechanics |
| CStackVariables | Kernel variables allocated on the stack. |
| CMultiphaseBulkDensityKernel | Kernel to update the bulk density before a mechanics solve in sequential schemes |
| CMultiphaseBulkDensityKernelFactory | |
| ►CPoromechanicsBase | Defines the kernel structure for solving quasi-static poromechanics |
| CStackVariables | Kernel variables allocated on the stack. |
| ►CSinglePhasePoromechanics | Implements kernels for solving quasi-static single-phase poromechanics |
| CStackVariables | Kernel variables allocated on the stack. |
| CSinglePhaseBulkDensityKernel | Kernel to update the bulk density before a mechanics solve in sequential schemes |
| CSinglePhaseBulkDensityKernelFactory | |
| ►NproppantTransportKernels | |
| CFluidUpdateKernel | |
| CComponentDensityUpdateKernel | |
| CProppantUpdateKernel | |
| CAccumulationKernel | |
| CFluxKernel | |
| CProppantPackVolumeKernel | |
| CResidualNormKernel | |
| CResidualNormKernelFactory | |
| ►NrateAndStateKernels | |
| ►CImplicitFixedStressRateAndStateKernel | |
| CStackVariables | Kernel variables located on the stack |
| ►CExplicitRateAndStateKernel | |
| CStackVariables | Kernel variables located on the stack |
| CKutta32Table | Butcher table for embedded RK3(2) method using Kuttas third order method for the high-order update, and an explicit trapezoidal rule based on the first and third stage rates for the low-order update |
| CBogackiShampine32Table | Butcher table for the BogackiShampine 3(2) method |
| CEmbeddedRungeKuttaKernel | Runge-Kutta method used to time integrate slip and state. Uses of a high order update used to integrate the solutions, and a lower order update to estimate the error in the time step |
| ►NreactiveCompositionalMultiphaseOBLKernels | |
| COBLOperatorsKernel | Compute OBL Operators and derivatives |
| COBLOperatorsKernelFactory | |
| ►CElementBasedAssemblyKernel | Compute accumulation term for an element |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CElementBasedAssemblyKernelFactory | |
| CFluxComputeKernelBase | Base class for FluxComputeKernel that holds all data not dependent on template parameters (like stencil type and number of components/dofs) |
| ►CFluxComputeKernel | Compute flux term for an element |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CFluxComputeKernelFactory | |
| CResidualNormKernel | |
| CResidualDARTSL2NormKernel | |
| CSolutionCheckKernel | |
| ►NseismicityRateKernels | |
| ►CSeismicityRateKernel | |
| CStackVariables | Kernel variables located on the stack |
| CSeismicityRateKernelPoroelastic | |
| ►NsinglePhaseBaseKernels | |
| ►CAccumulationKernel | Define the interface for the assembly kernel in charge of accumulation |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CSurfaceElementAccumulationKernel | Define the interface for the assembly kernel in charge of accumulation in SurfaceElementSubRegion |
| CAccumulationKernelFactory | |
| CFluidUpdateKernel | |
| CHydrostaticPressureKernel | |
| CMobilityKernel | |
| CIsothermalResidualNormKernel | |
| CThermalResidualNormKernel | |
| CResidualNormKernelFactory | |
| CSolutionCheckKernel | |
| CSolutionScalingKernel | |
| CStatisticsKernel | |
| ►NsinglePhaseFVMKernels | |
| CAquiferBCKernel | Functions to assemble aquifer boundary condition contributions to residual and Jacobian |
| ►CDirichletFluxComputeKernel | Define the interface for the assembly kernel in charge of Dirichlet face flux terms |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CDirichletFluxComputeKernelFactory | |
| ►CFluxComputeKernel | Define the interface for the assembly kernel in charge of flux terms |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CFluxComputeKernelFactory | |
| CFluxComputeKernelBase | Base class for FluxComputeKernel that holds all data not dependent on template parameters (like stencil type and number of dofs) |
| ►NsinglePhaseHybridFVMKernels | |
| ►CAveragePressureGradientKernel | |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CAveragePressureGradientKernelFactory | |
| ►CElementBasedAssemblyKernel | Define the interface for the assembly kernel in charge of flux terms |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CElementBasedAssemblyKernelFactory | |
| CResidualNormKernel | |
| CResidualNormKernelFactory | |
| ►NsinglePhasePoromechanicsConformingFracturesKernels | |
| ►CConnectorBasedAssemblyKernel | |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CConnectorBasedAssemblyKernelFactory | |
| ►NsinglePhasePoromechanicsEmbeddedFracturesKernels | |
| ►CConnectorBasedAssemblyKernel | |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CConnectorBasedAssemblyKernelFactory | |
| ►NsinglePhaseProppantBaseKernels | |
| CFluidUpdateKernel | |
| ►NsinglePhaseProppantFluxKernels | |
| CFaceElementFluxKernel | |
| ►NsinglePhaseWellKernels | |
| CSubRegionTag | |
| CElemTag | |
| CColOffset | |
| CRowOffset | |
| CControlEquationHelper | |
| CFluxKernel | |
| CPressureRelationKernel | |
| CPerforationKernel | |
| CAccumulationKernel | |
| CPresInitializationKernel | |
| CRateInitializationKernel | |
| CResidualNormKernel | |
| CResidualNormKernelFactory | |
| ►NsolidMechanicsALMKernels | |
| ►CALM | Define the base interface for implicit finite element kernels. |
| CStackVariables | Kernel variables allocated on the stack. |
| CComputeTractionKernel | A struct to compute the traction after nonlinear solve |
| CConstraintCheckKernel | A struct to check for constraint satisfaction |
| CUpdateStateKernel | A struct to check for constraint satisfaction |
| ►CALMSimultaneous | Define the base interface for implicit finite element kernels. |
| CStackVariables | Kernel variables allocated on the stack. |
| CComputeTractionSimultaneousKernel | A struct to compute the traction after nonlinear solve |
| ►NsolidMechanicsConformingContactKernels | |
| ►CConformingContactKernelsBase | Implements kernels for ALM |
| CStackVariables | Kernel variables allocated on the stack. |
| CComputeRotationMatricesKernel | A struct to compute rotation matrices |
| ►CFaceBubbleKernels | Implements kernels for solving quasi-static equilibrium |
| CStackVariables | Kernel variables allocated on the stack. |
| ►CDispJumpUpdate | Define the base interface for implicit finite element kernels. |
| CStackVariables | Kernel variables allocated on the stack. |
| ►NsolidMechanicsEFEMKernels | |
| ►CEFEMJumpUpdate | Implements kernels for solving quasi-static equilibrium |
| CStackVariables | Kernel variables allocated on the stack. |
| ►CEFEM | Implements kernels for solving quasi-static equilibrium |
| CStackVariables | Kernel variables allocated on the stack. |
| CStateUpdateKernel | A struct to update fracture traction |
| ►CEFEMKernelsBase | Implements kernels for solving quasi-static equilibrium |
| CStackVariables | Kernel variables allocated on the stack. |
| ►CEFEMStaticCondensation | Implements kernels for solving quasi-static equilibrium |
| CStackVariables | Kernel variables allocated on the stack. |
| ►NsolidMechanicsLagrangeContactKernels | |
| ►CLagrangeContact | Define the base interface for implicit finite element kernels. |
| CStackVariables | Kernel variables allocated on the stack. |
| ►NsolidMechanicsLagrangianFEMKernels | Namespace to contain the solid mechanics kernels |
| ►CExplicitFiniteStrain | Implements kernels for solving the equations of motion using the explicit Newmark method under the finite strain assumption |
| CStackVariables | Kernel variables allocated on the stack. |
| ►CExplicitSmallStrain | Implements kernels for solving the equations of motion using the explicit Newmark method under the small strain assumption |
| CStackVariables | Kernel variables allocated on the stack. |
| ►CFixedStressThermoPoromechanics | Implements kernels for solving the solid part of the fixed-stress thermoporomechanics problem |
| CStackVariables | Kernel variables allocated on the stack. |
| ►CImplicitSmallStrainNewmark | Implements kernels for solving the equations of motion using an implicit Newmark's method. |
| CStackVariables | |
| ►CImplicitSmallStrainQuasiStatic | Implements kernels for solving quasi-static equilibrium |
| CNoOpFunctors | Internal struct to provide no-op defaults used in the inclusion of lambda functions into kernel component functions |
| CStackVariables | Kernel variables allocated on the stack. |
| CExplicitKernel | |
| ►NsolidMechanicsMPMKernels | |
| CStateUpdateKernel | A struct to update particle stresses |
| ►NstabilizedCompositionalMultiphaseFVMKernels | |
| ►CFluxComputeKernel | Define the interface for the assembly kernel in charge of flux terms |
| CStackVariables | |
| CFluxComputeKernelFactory | |
| ►NstabilizedSinglePhaseFVMKernels | |
| ►CFluxComputeKernel | Define the interface for the assembly kernel in charge of flux terms |
| CStackVariables | |
| CFluxComputeKernelFactory | |
| ►NsurfaceGenerationKernels | |
| CNodalForceKernel | |
| CPoroElasticNodalForceKernel | |
| ►NthermalCompositionalMultiphaseBaseKernels | |
| CFluidUpdateKernel | |
| CSolidInternalEnergyUpdateKernel | |
| ►CAccumulationKernel | Define the interface for the assembly kernel in charge of thermal accumulation and volume balance |
| CStackVariables | |
| CAccumulationKernelFactory | |
| CPhaseVolumeFractionKernel | Define the interface for the property kernel in charge of computing the phase volume fractions |
| CPhaseVolumeFractionKernelFactory | |
| CResidualNormKernel | |
| CResidualNormKernelFactory | |
| CSolutionCheckKernel | Define the kernel for checking the updated solution |
| CSolutionCheckKernelFactory | |
| CSolutionScalingKernel | Define the kernel for scaling the Newton update |
| CSolutionScalingKernelFactory | |
| ►NthermalCompositionalMultiphaseFVMKernels | |
| ►CDiffusionDispersionFluxComputeKernel | Define the interface for the assembly kernel in charge of diffusion/dispersion flux terms |
| CStackVariables | |
| CDiffusionDispersionFluxComputeKernelFactory | |
| ►CDirichletFluxComputeKernel | Define the interface for the assembly kernel in charge of Dirichlet face flux terms |
| CStackVariables | |
| CDirichletFluxComputeKernelFactory | |
| ►CFluxComputeKernel | Define the interface for the assembly kernel in charge of flux terms |
| CStackVariables | |
| CFluxComputeKernelFactory | |
| CPhaseMobilityKernel | Define the interface for the property kernel in charge of computing the phase mobilities |
| CPhaseMobilityKernelFactory | |
| ►NthermalCompositionalMultiphaseWellKernels | |
| CTotalMassDensityKernel | Define the interface for the property kernel in charge of computing the total mass density |
| CTotalMassDensityKernelFactory | |
| CResidualNormKernel | |
| CResidualNormKernelFactory | |
| ►CElementBasedAssemblyKernel | Define the interface for the assembly kernel in charge of thermal accumulation and volume balance |
| CStackVariables | |
| CElementBasedAssemblyKernelFactory | |
| ►CFaceBasedAssemblyKernel | Define the interface for the assembly kernel in charge of flux terms |
| CStackVariables | |
| CFaceBasedAssemblyKernelFactory | |
| ►NthermalPerforationFluxKernels | |
| CPerforationFluxKernel | |
| CPerforationFluxKernelFactory | |
| ►NthermalPoromechanicsKernels | |
| ►CThermalMultiphasePoromechanics | Implements kernels for solving quasi-static thermal multiphase poromechanics |
| CStackVariables | Kernel variables allocated on the stack. |
| ►CThermalSinglePhasePoromechanics | Implements kernels for solving quasi-static thermal single-phase poromechanics |
| CStackVariables | Kernel variables allocated on the stack. |
| ►NthermalSinglePhaseBaseKernels | |
| CSolidInternalEnergyUpdateKernel | |
| ►CAccumulationKernel | Define the interface for the assembly kernel in charge of accumulation |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CSurfaceElementAccumulationKernel | Define the interface for the assembly kernel in charge of accumulation in SurfaceElementSubRegion |
| CAccumulationKernelFactory | |
| ►NthermalSinglePhaseFVMKernels | |
| ►CDirichletFluxComputeKernel | Define the interface for the assembly kernel in charge of Dirichlet face flux terms |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CDirichletFluxComputeKernelFactory | |
| ►CFluxComputeKernel | Define the interface for the assembly kernel in charge of flux terms |
| CStackVariables | |
| CFluxComputeKernelFactory | |
| ►NthermalSinglePhasePoromechanicsConformingFracturesKernels | |
| ►CConnectorBasedAssemblyKernel | |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CConnectorBasedAssemblyKernelFactory | |
| ►NthermalSinglePhasePoromechanicsEmbeddedFracturesKernels | |
| ►CConnectorBasedAssemblyKernel | |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CConnectorBasedAssemblyKernelFactory | |
| ►NthermalSinglePhaseWellKernels | |
| ►CElementBasedAssemblyKernel | Define the interface for the assembly kernel in charge of accumulation and volume balance |
| CStackVariables | Kernel variables (dof numbers, jacobian and residual) located on the stack |
| CElementBasedAssemblyKernelFactory | |
| ►NthermoPoromechanicsEFEMKernels | |
| ►CThermalSinglePhasePoromechanicsEFEM | |
| CStackVariables | Kernel variables allocated on the stack. |
| ►Ntraits | |
| CVectorBasedTraits | Traits helper struct templated on the vector type |
| ►Nunits | |
| CTimeFormatInfo | Stores information that is useful to duration strings. Based on the geos::units time constants |
| ►Nvtk | |
| CVTKPolyDataWriterInterface | Encapsulate output methods for vtk |
| CVTKPVDWriter | VTK PVD Writer class |
| CVTKVTMWriter | VTM Writer class |
| CCollocatedNodes | Convenience wrapper around the raw vtk information |
| CAllMeshes | Gathers all the vtk meshes together |
| ►NwellTags | |
| CSubRegionTag | |
| CElemTag | |
| CColOffset | |
| CColOffset_WellJac | |
| CColOffset_WellJac< NC, 0 > | |
| CColOffset_WellJac< NC, 1 > | |
| CRowOffset | |
| CRowOffset_WellJac | |
| CRowOffset_WellJac< NC, 0 > | |
| CRowOffset_WellJac< NC, 1 > | |
| ►NxmlWrapper | |
| CxmlAttributePos | |
| CxmlNodePos | |
| CxmlDocument | |
| CmapBase | Base template for ordered and unordered maps |
| COpEqual | OpEqual Operator that sets a value |
| COpAdd | OpAdd Operator that adds a value |
| CFieldSpecificationOp | FieldSpecificationOp |
| CFieldSpecificationEqual | |
| CFieldSpecificationAdd | |
| CFixedSizeDeque | Implement a double ended queue with fixed number of fixed size buffer to be stored |
| CFixedSizeDequeWithMutexes | Associate mutexes with the fixedSizeDeque |
| CEnumStrings | Provides enum <-> string conversion facilities |
| CTableData | Class for managing table data |
| ►CTableData2D | Class for managing 2D table m_data |
| CTableDataHolder | Struct containing conversion informations |
| CTableFormatter | Abstract class for formatting table data |
| CTableCSVFormatter | Class for CSV formatting |
| CTableTextFormatter | Class for log formatting |
| ►CTableLayout | Class for setup the table layout |
| CColumn | Struct for a column |
| CColumnParam | Structure to set up each colum parameters |
| CCommandLineOptions | |
| CLifoStorage | |
| CLifoStorageCommon | |
| CLifoStorageCuda | |
| CLifoStorageHost | |
| CInputError | Exception class used to report errors in user input |
| CSimulationError | Exception class used to report errors in user input |
| CBadTypeError | Exception class used to report errors from type conversion |
| CNotAnError | Exception class used for special control flow |
| CMemoryInfos | Class to fetch and store memory information for different resource types |
| CMpiWrapper | |
| CMultiMutexesLock | Class to handle locks using 2 mutexes |
| CPath | Class describing a file Path |
| CSpan | Lightweight non-owning wrapper over a contiguous range of elements |
| CStopwatch | Class defining a simple stopwatch for interval timing |
| CTensor | Lightweight wrapper around a c-array |
| CTimer | Object that times the duration of its existence |
| CInterObjectRelation | |
| CExecutableGroup | |
| CHistoryMetadata | A minimal class to specify information about time history information being collected and output |
| CLogLevelsRegistry | Keep track of log level documention for a group |
| CMappedVector | |
| CReferenceWrapper | |
| CChomboCoupler | A class managing data exchange with CHOMBO |
| CBlueprintOutput | A class for creating Conduit blueprint-based outputs |
| CChomboIO | |
| COutputBase | |
| COutputManager | |
| CPythonOutput | Performs no actual output but returns control to the Python interpreter |
| CRestartOutput | |
| CSiloOutput | |
| CTimeHistoryOutput | |
| CVTKOutput | A class for creating vtk outputs |
| CSiloFile | |
| CBufferedHistoryIO | An abstract class for performing buffered history output |
| CHDFFile | |
| CHDFHistoryIO | Perform buffered history I/O for a single type(really just output) on using HDF5 |
| CHistoryCollection | |
| CHistoryCollectionBase | Intermediate class for code factorisation. It mainly deals with collector and buffer management. It delegates the actual collection to derived classes |
| CPackCollection | |
| CLinearOperator | Abstract base class for linear operators |
| CLinearSolverBase | Simple interface for linear solvers that allows to extract solution results |
| CPreconditionerBase | Common interface for preconditioning operators |
| ►CDofManager | The DoFManager is responsible for allocating global dofs, constructing sparsity patterns, and generally simplifying the interaction between PhysicsSolvers and linear algebra operations |
| CFieldSupport | Describes field support on a single mesh body/level |
| CSubComponent | Describes a selection of components from a DoF field |
| CSuiteSparse | Wrapper for UMFPACK direct solver from SuiteSparse package |
| CSuperLUDist | Wrapper for SuperLU_Dist parallel direct solver |
| CHypreExport | Facilitates exporting Hypre matrix and associated vector objects (either in parallel or serial) |
| CHypreInterface | This class holds aliases based on the Hypre library |
| CHypreMatrix | Wrapper class for hypre's ParCSRMatrix |
| CHypreMGRData | Container for hypre preconditioner auxiliary data for MGR |
| CHyprePreconditioner | Wrapper around hypre-based preconditioners |
| CHypreSolver | This class creates and provides basic support for Hypre solvers |
| CHyprePrecWrapper | Container for hypre preconditioner function pointers |
| CHypreVector | Wrapper class for hypre's ParVector |
| CMatrixBase | Common base template for all matrix wrapper types |
| CPetscExport | Facilitates exporting Petsc matrix and associated vector objects (either in parallel or serial) |
| CPetscInterface | This class holds aliases based on the Petsc library |
| CPetscMatrix | This class creates and provides basic support for the Mat matrix object type used in PETSc |
| CPetscPreconditioner | Wrapper around PETSc-based preconditioners |
| CPetscSolver | This class creates and provides basic support for PETSc solvers |
| CPetscVector | This class creates and provides basic support for Vec vector object type used in PETSc |
| CEpetraExport | Facilitates exporting Epetra matrix and associated vector objects (either in parallel or serial) |
| CEpetraMatrix | Wrapper class for Epetra's CrsMatrix |
| CEpetraVector | Wrapper around Trilinos' Epetra_Vector object |
| CTrilinosInterface | This class holds aliases based on the Trilinos library |
| CTrilinosPreconditioner | Wrapper around Trilinos-based preconditioners |
| CTrilinosSolver | This class creates and provides basic support for AztecOO, Amesos and ML libraries |
| CVectorBase | Common base template for all vector wrapper types |
| CBicgstabSolver | This class implements Bi-Conjugate Gradient Stabilized method (right-preconditioned) for monolithic and block linear operators |
| CBlockPreconditioner | General 2x2 block preconditioner |
| CCgSolver | This class implements Conjugate Gradient method for monolithic and block linear operators |
| CGmresSolver | This class implements Generalized Minimized RESidual method (right-preconditioned) for monolithic and block linear operators |
| CKrylovSolver | Base class for Krylov solvers |
| CPreconditionerBlockJacobi | Common interface for identity preconditioning operator |
| CPreconditionerIdentity | Common interface for identity preconditioning operator |
| CPreconditionerJacobi | Common interface for identity preconditioning operator |
| CSeparateComponentPreconditioner | Separate component filter implemented as a compound preconditioner |
| CBlockOperator | Concrete representation of a block operator |
| CBlockOperatorView | Abstract view of a block operator |
| CBlockOperatorWrapper | "Shallow" representation of a block operator |
| CBlockVector | Concrete representation of a block vector |
| CBlockVectorView | Abstract view of a block vector |
| CBlockVectorWrapper | "Shallow" representation of a block vector |
| ►CComponentMask | Utility class that represents a mask for included/excluded component of a mask |
| CIterator | Forward const iterator over the set components (bits) |
| CInverseNormalOperator | Wraps a matrix A and represents A^{-1} * A^{-T} as a linear operator |
| ►CLinearSolverParameters | Set of parameters for a linear solver or preconditioner |
| CAMG | Algebraic multigrid parameters |
| CDD | Domain decomposition parameters |
| CDirect | Direct solver parameters: used for SuperLU_Dist interface through hypre and PETSc |
| CIFact | Incomplete factorization parameters |
| CKrylov | Krylov-method parameters |
| CMGR | Multigrid reduction parameters |
| CScaling | Matrix-scaling parameters |
| CLinearSolverResult | Results/stats of a linear solve |
| CNormalOperator | Wraps a matrix A and represents A^T * A as a linear operator |
| CTransposeOperator | Simple class that wraps a matrix and represents its transpose as a linear operator |
| ►CCellElementRegion | |
| CviewKeyStruct | A struct to serve as a container for variable strings and keys |
| CCellElementRegionSelector | |
| ►CCellElementSubRegion | |
| CviewKeyStruct | Struct to serve as a container for variable strings and keys |
| ►CDomainPartition | Partition of the decomposed physical domain. It also manages the connexion information to its neighbors |
| CgroupKeysStruct | Struct to serve as a container for group strings and keys |
| ►CEdgeManager | This class provides an interface to ObjectManagerBase in order to manage edge data |
| CviewKeyStruct | Container of keys needed to access the data of the class member |
| ►CElementRegionBase | The ElementRegionBase is the base class to manage the data stored at the element level |
| CviewKeyStruct | Struct to serve as a container for variable strings and keys |
| ►CElementRegionManager | Interface to ObjectManagerBase in order to manage ElementRegion data |
| CgroupKeyStruct | Group key associated with elementRegionsGroup |
| ►CElementSubRegionBase | |
| CgroupKeyStruct | Struct to serve as a container for group strings and keys |
| CviewKeyStruct | A struct to serve as a container for variable strings and keys |
| ►CEmbeddedSurfaceNodeManager | Interface to ObjectManagerBase in order to manage node data |
| CviewKeyStruct | Added view access keys to be bound with class data member |
| CsurfaceWithGhostNodes | Struct defining an embedded element which has at least on node which is a ghost on this rank |
| ►CEmbeddedSurfaceSubRegion | |
| CviewKeyStruct | Struct containing the keys to all embedded surface element views |
| CExternalDataSourceBase | Abstract base class implementation for different mesh types. The ExternalDataSourceBase is the Group specialization for different type of mesh handling |
| CExternalDataSourceManager | This class manages a data repository whereof objects can be imported to GEOS (reservoir mesh, well mesh) |
| ►CFaceElementSubRegion | |
| CviewKeyStruct | Struct containing the keys to all face element views |
| ►CFaceManager | Interface to ObjectManagerBase in order to manage face data |
| CviewKeyStruct | |
| CFieldIdentifiers | |
| CCellBlock | |
| CCellBlockABC | |
| CCellBlockManager | Interface to ObjectManagerBase in order to manage CellBlock data |
| CCellBlockManagerABC | Abstract base class for CellBlockManager |
| CToCellRelation | Container for maps from a mesh object (node, edge or face) to cells |
| CExternalMeshGeneratorBase | Base class for external mesh generators (importers) |
| CFaceBlock | Simple implementation of the FaceBlockABC contract |
| CFaceBlockABC | Block of 2d elements (geometrical surfaces in 3d) |
| CInternalMeshGenerator | Class handling GEOSX generated meshes |
| CInternalWellboreGenerator | Class generating internal wellbore mesh |
| CInternalWellGenerator | |
| CLineBlock | |
| ►CLineBlockABC | |
| CNodeLocation | Struct to define the top and bottom node of a segment |
| CMeshComponentBase | |
| CMeshGeneratorBase | Abstract base class implementation for different mesh types. The MeshGeneratorBase is the Group specialization for different type of mesh handling |
| CParticleBlock | |
| CParticleBlockABC | |
| CParticleBlockManager | Interface to ObjectManagerBase in order to manage ParticleBlock data |
| CParticleBlockManagerABC | Abstract base class for ParticleBlockManager |
| CParticleMeshGenerator | Class handling import of particle data from an externel particle file |
| CPartitionDescriptor | Simple utility to retrieve partition information in case of Metis or Spatial partition |
| CRegion | Region parameters with Group capabilities |
| CVTKHierarchicalDataSource | This class provides an API to access VTKPartitionedDataSetCollection through a vtkDataAssembly |
| CVTKMeshGenerator | Class implementation of VTK generated meshes |
| CVTKWellGenerator | Class implementation of VTK generated well |
| CWellGeneratorBase | |
| ►CMeshBody | The class is used to manage mesh body |
| CgroupStructKeys | Group keys |
| CviewKeysStruct | Data repository keys |
| CMeshLevel | Class facilitating the representation of a multi-level discretization of a MeshBody |
| CMeshManager | This class manages the mesh objects in GEOSX (reservoir mesh, well mesh) |
| CMeshObjectPath | Class to hold the path to a collection of mesh objects |
| ►CNodeManager | Interface to ObjectManagerBase in order to manage node data |
| CviewKeyStruct | Added view access keys to be bound with class data member |
| ►CObjectManagerBase | The ObjectManagerBase is the base object of all object managers in the mesh data hierachy |
| CgroupKeyStruct | Struct to serve as a container for group strings and keys |
| CviewKeyStruct | Struct to serve as a container for variable strings and keys |
| ►CParticleManager | Interface to ObjectManagerBase in order to manage ParticleRegion data |
| CgroupKeyStruct | Group key associated with particleRegionsGroup |
| ►CParticleRegion | |
| CviewKeyStruct | A struct to serve as a container for variable strings and keys |
| ►CParticleRegionBase | The ParticleRegionBase is the base class to manage the data stored at the particle level |
| CviewKeyStruct | Struct to serve as a container for variable strings and keys |
| ►CParticleSubRegion | |
| CviewKeyStruct | Struct to serve as a container for variable strings and keys |
| ►CParticleSubRegionBase | |
| CgroupKeyStruct | Struct to serve as a container for group strings and keys |
| CviewKeyStruct | A struct to serve as a container for variable strings and keys |
| ►CPerforation | |
| CviewKeyStruct | Struct to serve as a container for variable strings and keys |
| ►CPerforationData | |
| CviewKeyStruct | Struct to serve as a container for variable strings and keys |
| CBox | Class to represent a geometric box in GEOSX |
| CCustomPolarObject | Class to represent a geometric disc in GEOSX |
| CCylinder | Class to represent a geometric cylinder in GEOSX |
| CDisc | Class to represent a geometric disc in GEOSX |
| CGeometricObjectManager | Manager of the simple geometric objects |
| CPlanarGeometricObject | Abstract class to implement functions used by all bounded geometric objects in GEOSX, such as disc or plane |
| CRectangle | Class to represent a geometric box in GEOSX |
| CSimpleGeometricObjectBase | Base class for the geometric objects (box, plane, cylinder) |
| CThickPlane | Class to represent a geometric thick plane in GEOSX |
| ►CSurfaceElementRegion | |
| CviewKeyStruct | A struct to serve as a container for variable strings and keys |
| ►CSurfaceElementSubRegion | |
| CviewKeyStruct | Struct containing the keys to all surface element views |
| CToElementRelation | A relationship to an element |
| CToParticleRelation | A relationship to a particle |
| ►CAverageOverQuadraturePointsBase | |
| CStackVariables | Kernel variables allocated on the stack. |
| ►CAverageOverQuadraturePoints1D | |
| CStackVariables | Kernel variables allocated on the stack. |
| CAverageOverQuadraturePoints1DKernelFactory | Class to create and launch the kernel |
| ►CCIcomputationKernel | Kernel to compute EDFM connectivity index |
| CStackVariables | Stack variables |
| CNodeKeyHasher | Strucure used to hash interpolation arrays representing high-order nodes |
| ►CWellElementRegion | This class specializes the element region for the case of a well. This class is also in charge of starting the construction of the well data structure in GenerateWell |
| CviewKeyStruct | Struct to serve as a container for variable strings and keys |
| ►CWellElementSubRegion | This class describes a collection of local well elements and perforations |
| CgroupKeyStruct | Struct to serve as a container for group strings and keys |
| CviewKeyStruct | Struct to serve as a container for variable strings and keys |
| ►CContactSolverBase | |
| CviewKeyStruct | |
| CSolidMechanicsAugmentedLagrangianContact | |
| ►CSolidMechanicsEmbeddedFractures | |
| CviewKeyStruct | |
| CSolidMechanicsLagrangeContact | |
| CSolidMechanicsLagrangeContactBubbleStab | |
| CSolidMechanicsPenaltyContact | |
| ►CFieldStatisticsBase | |
| CviewKeyStruct | |
| ►CCompositionalMultiphaseBase | |
| CviewKeyStruct | |
| ►CCompositionalMultiphaseFVM | |
| CDBCParameters | |
| CvalueAndLocation | Storage for value and element location, used to determine global max + location |
| CviewKeyStruct | |
| ►CCompositionalMultiphaseHybridFVM | |
| CviewKeyStruct | |
| CCompositionalMultiphaseStatistics | |
| ►CFlowSolverBase | |
| CBCMessage | Class used for displaying boundary warning message |
| CviewKeyStruct | |
| ►CProppantTransport | |
| CviewKeyStruct | |
| ►CReactiveCompositionalMultiphaseOBL | |
| CviewKeyStruct | |
| ►CSinglePhaseBase | |
| CFluidPropViews | Structure holding views into fluid properties used by the base solver |
| CThermalFluidPropViews | Structure holding views into thermal fluid properties used by the base solver |
| CviewKeyStruct | |
| CSinglePhaseFVM | |
| CSinglePhaseHybridFVM | |
| CSinglePhaseProppantBase | |
| ►CSinglePhaseStatistics | |
| CRegionStatistics | |
| CviewKeyStruct | |
| ►CSourceFluxStatsAggregator | |
| CStatData | Aggregated flux statistics data |
| CviewKeyStruct | View keys |
| CWrappedStats | Class that aggregate statistics of a flux over multiple time-steps for a given SourceFluxStatsAggregator and a for a given mesh part (i.e. a subregion, a region...) |
| CStencilAccessors | A struct to automatically construct and store element view accessors |
| CStencilMaterialAccessors | A struct to automatically construct and store element view accessors |
| ►CStencilDataCollection | |
| CKernelConnectionData | Element-element connection data extracted from the kernel |
| CviewKeyStruct | |
| ►CCompositionalMultiphaseWell | |
| CviewKeyStruct | |
| CNoOpStuct | |
| ►CSinglePhaseWell | |
| CviewKeyStruct | |
| CWellConstants | A container for constants used in the well solver |
| ►CWellControls | This class describes the controls used to operate a well |
| CviewKeyStruct | Struct to serve as a container for variable strings and keys |
| ►CWellSolverBase | |
| CviewKeyStruct | |
| ►CQuasiDynamicEQ | |
| CviewKeyStruct | |
| ►CQuasiDynamicEQRK32 | |
| CviewKeyStruct | |
| ►CSeismicityRate | |
| CviewKeyStruct | |
| ►CLinearSolverParametersInput | Linear solver parameters with Group capabilities |
| CviewKeyStruct | Keys appearing in XML |
| CCompositionalMultiphaseReservoirAndWells | |
| CCoupledReservoirAndWellsBase | |
| CCoupledSolver | |
| CFlowProppantTransportSolver | |
| ►CHydrofractureSolver | |
| CviewKeyStruct | |
| CMultiphasePoromechanics | |
| CPhaseFieldFractureSolver | |
| CDamageInterpolationKernel | |
| CPoromechanicsInitialization | |
| ►CPoromechanicsSolver | |
| CviewKeyStruct | |
| ►CSinglePhasePoromechanics | |
| CviewKeyStruct | |
| CSinglePhasePoromechanicsConformingFractures | |
| ►CSinglePhasePoromechanicsEmbeddedFractures | |
| CviewKeyStruct | |
| CSinglePhaseReservoirAndWells | |
| ►CNonlinearSolverParameters | |
| CviewKeysStruct | |
| ►CPhysicsSolverBase | Base class for all physics solvers |
| CgroupKeyStruct | Structure to hold scoped key names |
| CviewKeyStruct | Structure to hold scoped key names |
| ►CPhysicsSolverManager | |
| CviewKeyStruct | |
| ►CLaplaceBaseH1 | |
| CviewKeyStruct | |
| CLaplaceFEM | |
| ►CLaplaceFEMKernel | Implements kernels for solving Laplace's equation |
| CStackVariables | Kernel variables allocated on the stack. |
| ►CPhaseFieldDamageFEM | |
| CviewKeyStruct | |
| ►CPhaseFieldDamageKernel | Implements kernels for solving the Damage(or phase-field) equation in a phase-field fracture problem |
| CStackVariables | Kernel variables allocated on the stack. |
| ►CAverageStrainOverQuadraturePoints | |
| CStackVariables | Kernel variables allocated on the stack. |
| CAverageStrainOverQuadraturePointsKernelFactory | Class to create and launch the kernel |
| ►CSolidMechanicsLagrangianFEM | |
| CviewKeyStruct | |
| CSolidMechanicsLagrangianSSLE | |
| ►CSolidMechanicsMPM | |
| CviewKeyStruct | |
| CSolidMechanicsStateReset | |
| CSolidMechanicsStatistics | |
| ►CSolverStatistics | This class is used to log the solver statistics |
| CviewKeyStruct | Struct to serve as a container for variable strings and keys |
| CNewObjectLists | |
| CEmbeddedSurfaceGenerator | |
| CModifiedObjectLists | |
| CSurfaceGenerator | |
| ►CAcousticFirstOrderWaveEquationSEM | |
| CviewKeyStruct | |
| ►CAcousticVTIWaveEquationSEM | |
| CviewKeyStruct | |
| ►CAcousticPMLSEM | |
| CComputeDamping | |
| CPMLKernel | |
| CwaveSpeedPMLKernel | |
| ►CAcousticWaveEquationSEM | |
| CviewKeyStruct | |
| ►CAcousticMatricesSEM | |
| CDampingMatrix | |
| CGradientKappaBuoyancy | |
| CMassMatrix | |
| CAcousticTimeSchemeSEM | |
| CCoupledWaveSolver | |
| CAcousticElasticWaveEquationSEM | |
| CAcoustoElasticTimeSchemeSEM | |
| ►CElasticFirstOrderWaveEquationSEM | |
| CviewKeyStruct | |
| ►CElasticWaveEquationSEM | |
| CviewKeyStruct | |
| ►CElasticMatricesSEM | |
| CDampingMatrix | |
| CMassMatrix | |
| CElasticTimeSchemeSEM | |
| CPreComputeSourcesAndReceivers | |
| ►CWaveSolverBase | |
| CparametersPML | |
| CviewKeyStruct | |
| CWaveSolverUtils | |
| CBoundaryStencilWrapper | |
| ►CBoundaryStencil | Provides management of the boundary stencil points (stencils used to prescribe boundary conditions on domain boundaries, i.e. faces) |
| COrder | Defines the order of element/face in the stencil |
| CCellElementStencilMPFA | Provides management of the interior stencil points when using a Multi-point flux approximation |
| CCellElementStencilTPFAWrapper | |
| CCellElementStencilTPFA | |
| CEmbeddedSurfaceToCellStencilWrapper | Provide access to the EmbeddedSurfaceToCellStencil that may be called from a kernel function |
| CEmbeddedSurfaceToCellStencil | Provides management of the interior stencil points for a face elements when using Two-Point flux approximation |
| CFaceElementToCellStencilWrapper | Provides access to the FaceElementToCellStencil that may be called from a kernel function |
| CFaceElementToCellStencil | |
| CFiniteVolumeManager | |
| CUpwindingParameters | |
| ►CFluxApproximationBase | |
| CgroupKeyStruct | Group keys |
| CviewKeyStruct | View keys |
| ►CHybridMimeticDiscretization | |
| CviewKeyStruct | View keys |
| CCellDescriptor | A structure containing a single cell (element) identifier triplet |
| CProjectionEDFMHelper | A class that contains methods to modify cell and edfm stencils based on projection edfm |
| CStencilTraits | A collection of properties of a stencil type |
| CStencilWrapperBase | |
| CStencilBase | Provides management of the interior stencil points when using Two-Point flux approximation |
| CSurfaceElementStencilWrapper | Provides access to the SurfaceElementStencil that may be called from a kernel function |
| CSurfaceElementStencil | Provides management of the interior stencil points for a face elements when using Two-Point flux approximation |
| ►CTwoPointFluxApproximation | |
| CviewKeyStruct | View keys |
| CCompositeFunction | |
| CFunctionBase | |
| CFunctionManager | |
| CMultivariableTableFunction | |
| CMultivariableTableFunctionStaticKernel | |
| CSymbolicFunction | |
| ►CTableFunction | |
| CKernelWrapper | |
| COutputOptions | Struct containing output options |
| CviewKeyStruct | Struct containing lookup keys for data repository wrappers |
| ►CAquiferBoundaryCondition | |
| CKernelWrapper | |
| CviewKeyStruct | View keys |
| CDirichletBoundaryCondition | |
| ►CEquilibriumInitialCondition | |
| CviewKeyStruct | View keys |
| ►CFieldSpecificationBase | |
| CviewKeyStruct | View keys |
| CFieldSpecificationManager | |
| ►CPerfectlyMatchedLayer | |
| CviewKeyStruct | View keys |
| CSourceFluxBoundaryCondition | |
| ►CTractionBoundaryCondition | |
| CviewKeyStruct | View keys |
| ►CNumericalMethodsManager | |
| CgroupKeysStruct | Contains the keys for the object names in the data repository |
| CEventBase | |
| CEventManager | |
| CHaltEvent | |
| CPeriodicEvent | |
| CSoloEvent | |
| CTaskBase | |
| CTasksManager | A class to manage and execute tasks |
| CGeosxState | Holds the global GEOSX state. This is a singleton class, no more than one instance exists at at time. After construction the instance can be accessed from anywhere by the free function getGlobalState() |
| ►CProblemManager | This is the class handling the operation flow of the problem being ran in GEOS |
| CgroupKeysStruct | Child group viewKeys |
| CviewKeysStruct | Command line input viewKeys |
| ►NGEOS_FMT_NS | |
| Cformatter< std::optional< T > > | Format to be able to directly use a std::optional<T> |
| Cformatter< geos::units::TimeFormatInfo > | Formatter to be able to directly use a DurationInfo as a GEOS_FMT() argument |
| Cformatter< geos::dataRepository::DataContext > | Formatter to be able to directly use a DataContext as a GEOS_FMT() argument. Inherits from formatter<std::string> to reuse its parse() method |
| CDieterichSeismicityRate | Solving the ODE for seismicity rate from Dieterich, 1994 |
| CFaceBasedAssemblyKernel | Define the interface for the assembly kernel in charge of flux terms |
| CFaceBasedAssemblyKernelFactory | |
| CHolds | |
| CKernelWrapper | |
| CKeyIndexT | |
| CMPI_Status | |
| CPerforationKernelFactory | |
| Cstabledt | |
| CStructure | |
| CviewKeysStruct | Struct containing the view access keys to be bound with class data member |
