XML Element: CompositionalMultiphaseWell ======================================== ===================================== ====================================== ============ ==================================================================================================================================================================================================================================================================================================================================================================================================================================================================== Name Type Default Description ===================================== ====================================== ============ ==================================================================================================================================================================================================================================================================================================================================================================================================================================================================== allowLocalCompDensityChopping integer 1 Flag indicating whether local (cell-wise) chopping of negative compositions is allowed allowNonConvergedLinearSolverSolution integer 1 Cut time step if linear solution fail without going until max nonlinear iterations. cflFactor real64 0.5 Factor to apply to the `CFL condition `_ when calculating the maximum allowable time step. Values should be in the interval (0,1] initialDt real64 1e+99 Initial time-step value required by the solver to the event manager. isThermal integer 0 Flag indicating whether the problem is thermal or not. logLevel integer 0 | Sets the level of information to write in the standard output (the console typically). | Information output from lower logLevels is added with the desired log level | 1 | - Convergence information | - Linear solver information | - Output residual norm | - Solution information (scaling, maximum changes, quality check) | - Time step information | - Solver timers information | - Well control information | 2 | - The summary of declared fields and coupling maxAbsolutePressureChange real64 -1 Maximum (absolute) pressure change in a Newton iteration maxCompFractionChange real64 1 Maximum (absolute) change in a component fraction between two Newton iterations maxRelativeCompDensChange real64 1.79769e+208 Maximum (relative) change in a component density between two Newton iterations maxRelativePressureChange real64 1 Maximum (relative) change in pressure between two Newton iterations (recommended with rate control) maxRelativeTemperatureChange real64 1 Maximum (relative) change in temperature between two Newton iterations name groupName required A name is required for any non-unique nodes targetRegions groupNameRef_array required Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager. timeStepFromTables integer 0 Choose time step to honor rates/bhp tables time intervals useMass integer 0 Use mass formulation instead of molar usePhysicsScaling integer 1 Enable physics-based scaling of the linear system. Default: true. useTotalMassEquation integer 1 Use total mass equation writeCSV integer 0 When set to 1, write the rates into a CSV file writeLinearSystem integer 0 Write matrix, rhs, solution to screen ( = 1) or file ( = 2). writeStatistics geos_PhysicsSolverBase_StatsOutputType none | When set to `iteration`, output iterations information to a csv | When set to `convergence`, output convergence information to a csv | When set to `all` output both convergence & iteration information to a csv. LinearSolverParameters node unique :ref:`XML_LinearSolverParameters` NonlinearSolverParameters node unique :ref:`XML_NonlinearSolverParameters` WellControls node :ref:`XML_WellControls` ===================================== ====================================== ============ ====================================================================================================================================================================================================================================================================================================================================================================================================================================================================