Datastructure Index

Input Schema Definitions

XML Schema

Element: AcousticSEM

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
discretization	string	required	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
dtSeismoTrace	real64	0	Time step for output pressure at receivers
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
outputSeismoTrace	integer	0	Flag that indicates if we write the seismo trace in a file .txt, 0 no output, 1 otherwise
receiverCoordinates	real64_array2d	required	Coordinates (x,y,z) of the receivers
rickerOrder	integer	2	Flag that indicates the order of the Ricker to be used o, 1 or 2. Order 2 by default
sourceCoordinates	real64_array2d	required	Coordinates (x,y,z) of the sources
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
timeSourceFrequency	real32	required	Central frequency for the time source
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: Aquifer

Name	Type	Default	Description
allowAllPhasesIntoAquifer	integer	0	Flag to allow all phases to flow into the aquifer. This flag only matters for the configuration in which flow is from reservoir to aquifer. - If the flag is equal to 1, then all phases, including non-aqueous phases, are allowed to flow into the aquifer. - If the flag is equal to 0, then only the water phase is allowed to flow into the aquifer. If you are in a configuration in which flow is from reservoir to aquifer and you expect non-aqueous phases to saturate the reservoir cells next to the aquifer, set this flag to 1. This keyword is ignored for single-phase flow simulations
aquiferAngle	real64	required	Angle subtended by the aquifer boundary from the center of the reservoir [degress]
aquiferElevation	real64	required	Aquifer elevation (positive going upward) [m]
aquiferInitialPressure	real64	required	Aquifer initial pressure [Pa]
aquiferInnerRadius	real64	required	Aquifer inner radius [m]
aquiferPermeability	real64	required	Aquifer permeability [m^2]
aquiferPorosity	real64	required	Aquifer porosity
aquiferThickness	real64	required	Aquifer thickness [m]
aquiferTotalCompressibility	real64	required	Aquifer total compressibility (rock and fluid) [Pa^-1]
aquiferWaterDensity	real64	required	Aquifer water density [kg.m^-3]
aquiferWaterPhaseComponentFraction	real64_array	{0}	Aquifer water phase component fraction. This keyword is ignored for single-phase flow simulations.
aquiferWaterPhaseComponentNames	string_array	{}	Aquifer water phase component names. This keyword is ignored for single-phase flow simulations.
aquiferWaterViscosity	real64	required	Aquifer water viscosity [Pa.s]
bcApplicationTableName	string		Name of table that specifies the on/off application of the boundary condition.
beginTime	real64	-1e+99	Time at which the boundary condition will start being applied.
direction	R1Tensor	{0,0,0}	Direction to apply boundary condition to.
endTime	real64	1e+99	Time at which the boundary condition will stop being applied.
functionName	string		Name of function that specifies variation of the boundary condition.
initialCondition	integer	0	Boundary condition is applied as an initial condition.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
pressureInfluenceFunctionName	string		Name of the table describing the pressure influence function . If not provided, we use a default pressure influence function
scale	real64	0	Scale factor for value of the boundary condition.
setNames	string_array	required	Name of sets that boundary condition is applied to.

Element: Benchmarks

Name	Type	Default	Description
lassen	node	unique	Element: lassen
quartz	node	unique	Element: quartz

Element: BiotPorosity

Name	Type	Default	Description
defaultReferencePorosity	real64	required	Default value of the reference porosity
grainBulkModulus	real64	required	Grain bulk modulus
name	string	required	A name is required for any non-unique nodes

Element: BlackOilFluid

Name	Type	Default	Description
componentMolarWeight	real64_array	required	Component molar weights
componentNames	string_array	{}	List of component names
hydrocarbonFormationVolFactorTableNames	string_array	{}	List of formation volume factor TableFunction names from the Functions block. The user must provide one TableFunction per hydrocarbon phase, in the order provided in “phaseNames”. For instance, if “oil” is before “gas” in “phaseNames”, the table order should be: oilTableName, gasTableName
hydrocarbonViscosityTableNames	string_array	{}	List of viscosity TableFunction names from the Functions block. The user must provide one TableFunction per hydrocarbon phase, in the order provided in “phaseNames”. For instance, if “oil” is before “gas” in “phaseNames”, the table order should be: oilTableName, gasTableName
name	string	required	A name is required for any non-unique nodes
phaseNames	string_array	required	List of fluid phases
surfaceDensities	real64_array	required	List of surface mass densities for each phase
tableFiles	path_array	{}	List of filenames with input PVT tables (one per phase)
waterCompressibility	real64	0	Water compressibility
waterFormationVolumeFactor	real64	0	Water formation volume factor
waterReferencePressure	real64	0	Water reference pressure
waterViscosity	real64	0	Water viscosity

Element: Blueprint

Name	Type	Default	Description
childDirectory	string		Child directory path
name	string	required	A name is required for any non-unique nodes
outputFullQuadratureData	integer	0	If true writes out data associated with every quadrature point.
parallelThreads	integer	1	Number of plot files.
plotLevel	geosx_dataRepository_PlotLevel	1	Determines which fields to write.

Element: BoundedPlane

Name	Type	Default	Description
dimensions	real64_array	required	Length and width of the bounded plane
lengthVector	R1Tensor	required	Tangent vector defining the orthonormal basis along with the normal.
name	string	required	A name is required for any non-unique nodes
normal	R1Tensor	required	Normal (n_x,n_y,n_z) to the plane (will be normalized automatically)
origin	R1Tensor	required	Origin point (x,y,z) of the plane (basically, any point on the plane)
tolerance	real64	1e-05	Tolerance to determine if a point sits on the plane or not. It is relative to the maximum dimension of the plane.
widthVector	R1Tensor	required	Tangent vector defining the orthonormal basis along with the normal.

Element: Box

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
strike	real64	-90	The strike angle of the box
xMax	R1Tensor	required	Maximum (x,y,z) coordinates of the box
xMin	R1Tensor	required	Minimum (x,y,z) coordinates of the box

Element: BrooksCoreyBakerRelativePermeability

Name	Type	Default	Description
gasOilRelPermExponent	real64_array	{1}	Rel perm power law exponent for the pair (gas phase, oil phase) at residual water saturation The expected format is “{ gasExp, oilExp }”, in that order
gasOilRelPermMaxValue	real64_array	{0}	Maximum rel perm value for the pair (gas phase, oil phase) at residual water saturation The expected format is “{ gasMax, oilMax }”, in that order
name	string	required	A name is required for any non-unique nodes
phaseMinVolumeFraction	real64_array	{0}	Minimum volume fraction value for each phase
phaseNames	string_array	required	List of fluid phases
waterOilRelPermExponent	real64_array	{1}	Rel perm power law exponent for the pair (water phase, oil phase) at residual gas saturation The expected format is “{ waterExp, oilExp }”, in that order
waterOilRelPermMaxValue	real64_array	{0}	Maximum rel perm value for the pair (water phase, oil phase) at residual gas saturation The expected format is “{ waterMax, oilMax }”, in that order

Element: BrooksCoreyCapillaryPressure

Name	Type	Default	Description
capPressureEpsilon	real64	1e-06	Wetting-phase saturation at which the max cap. pressure is attained; used to avoid infinite cap. pressure values for saturations close to zero
name	string	required	A name is required for any non-unique nodes
phaseCapPressureExponentInv	real64_array	{2}	Inverse of capillary power law exponent for each phase
phaseEntryPressure	real64_array	{1}	Entry pressure value for each phase
phaseMinVolumeFraction	real64_array	{0}	Minimum volume fraction value for each phase
phaseNames	string_array	required	List of fluid phases

Element: BrooksCoreyRelativePermeability

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
phaseMinVolumeFraction	real64_array	{0}	Minimum volume fraction value for each phase
phaseNames	string_array	required	List of fluid phases
phaseRelPermExponent	real64_array	{1}	Minimum relative permeability power law exponent for each phase
phaseRelPermMaxValue	real64_array	{0}	Maximum relative permeability value for each phase

Element: CO2BrineEzrokhiFluid

Name	Type	Default	Description
componentMolarWeight	real64_array	{0}	Component molar weights
componentNames	string_array	{}	List of component names
flashModelParaFile	path	required	Name of the file defining the parameters of the flash model
name	string	required	A name is required for any non-unique nodes
phaseNames	string_array	{}	List of fluid phases
phasePVTParaFiles	path_array	required	Names of the files defining the parameters of the viscosity and density models

Element: CO2BrineEzrokhiThermalFluid

Name	Type	Default	Description
componentMolarWeight	real64_array	{0}	Component molar weights
componentNames	string_array	{}	List of component names
flashModelParaFile	path	required	Name of the file defining the parameters of the flash model
name	string	required	A name is required for any non-unique nodes
phaseNames	string_array	{}	List of fluid phases
phasePVTParaFiles	path_array	required	Names of the files defining the parameters of the viscosity and density models

Element: CO2BrinePhillipsFluid

Name	Type	Default	Description
componentMolarWeight	real64_array	{0}	Component molar weights
componentNames	string_array	{}	List of component names
flashModelParaFile	path	required	Name of the file defining the parameters of the flash model
name	string	required	A name is required for any non-unique nodes
phaseNames	string_array	{}	List of fluid phases
phasePVTParaFiles	path_array	required	Names of the files defining the parameters of the viscosity and density models

Element: CO2BrinePhillipsThermalFluid

Name	Type	Default	Description
componentMolarWeight	real64_array	{0}	Component molar weights
componentNames	string_array	{}	List of component names
flashModelParaFile	path	required	Name of the file defining the parameters of the flash model
name	string	required	A name is required for any non-unique nodes
phaseNames	string_array	{}	List of fluid phases
phasePVTParaFiles	path_array	required	Names of the files defining the parameters of the viscosity and density models

Element: CarmanKozenyPermeability

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
particleDiameter	real64	required	Diameter of the spherical particles.
sphericity	real64	required	Sphericity of the particles.

Element: CellElementRegion

Name	Type	Default	Description
cellBlocks	string_array	{}	(no description available)
coarseningRatio	real64	0	(no description available)
materialList	string_array	required	List of materials present in this region
meshBody	string		Mesh body that contains this region
name	string	required	A name is required for any non-unique nodes

Element: ChomboIO

Name	Type	Default	Description
beginCycle	real64	required	Cycle at which the coupling will commence.
childDirectory	string		Child directory path
inputPath	string	/INVALID_INPUT_PATH	Path at which the chombo to geosx file will be written.
name	string	required	A name is required for any non-unique nodes
outputPath	string	required	Path at which the geosx to chombo file will be written.
parallelThreads	integer	1	Number of plot files.
useChomboPressures	integer	0	True iff geosx should use the pressures chombo writes out.
waitForInput	integer	required	True iff geosx should wait for chombo to write out a file. When true the inputPath must be set.

Element: CompositeFunction

Name	Type	Default	Description
expression	string		Composite math expression
functionNames	string_array	{}	List of source functions. The order must match the variableNames argument.
inputVarNames	string_array	{}	Name of fields are input to function.
name	string	required	A name is required for any non-unique nodes
variableNames	string_array	{}	List of variables in expression

Element: CompositionalMultiphaseFVM

Name	Type	Default	Description
allowLocalCompDensityChopping	integer	1	Flag indicating whether local (cell-wise) chopping of negative compositions is allowed
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
discretization	string	required	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
inputFluxEstimate	real64	1	Initial estimate of the input flux used only for residual scaling. This should be essentially equivalent to the input flux * dt.
isThermal	integer	0	Flag indicating whether the problem is thermal or not.
logLevel	integer	0	Log level
maxCompFractionChange	real64	0.5	Maximum (absolute) change in a component fraction in a Newton iteration
maxRelativePressureChange	real64	0.5	Maximum (relative) change in pressure in a Newton iteration (expected value between 0 and 1)
maxRelativeTemperatureChange	real64	0.5	Maximum (relative) change in temperature in a Newton iteration (expected value between 0 and 1)
name	string	required	A name is required for any non-unique nodes
solutionChangeScalingFactor	real64	0.5	Damping factor for solution change targets
targetPhaseVolFractionChangeInTimeStep	real64	0.2	Target (absolute) change in phase volume fraction in a time step
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
targetRelativePressureChangeInTimeStep	real64	0.2	Target (relative) change in pressure in a time step (expected value between 0 and 1)
targetRelativeTemperatureChangeInTimeStep	real64	0.2	Target (relative) change in temperature in a time step (expected value between 0 and 1)
temperature	real64	required	Temperature
useMass	integer	0	Use mass formulation instead of molar
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: CompositionalMultiphaseFluid

Name	Type	Default	Description
componentAcentricFactor	real64_array	required	Component acentric factors
componentBinaryCoeff	real64_array2d	{{0}}	Table of binary interaction coefficients
componentCriticalPressure	real64_array	required	Component critical pressures
componentCriticalTemperature	real64_array	required	Component critical temperatures
componentMolarWeight	real64_array	required	Component molar weights
componentNames	string_array	required	List of component names
componentVolumeShift	real64_array	{0}	Component volume shifts
equationsOfState	string_array	required	List of equation of state types for each phase
name	string	required	A name is required for any non-unique nodes
phaseNames	string_array	required	List of fluid phases

Element: CompositionalMultiphaseHybridFVM

Name	Type	Default	Description
allowLocalCompDensityChopping	integer	1	Flag indicating whether local (cell-wise) chopping of negative compositions is allowed
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
discretization	string	required	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
inputFluxEstimate	real64	1	Initial estimate of the input flux used only for residual scaling. This should be essentially equivalent to the input flux * dt.
isThermal	integer	0	Flag indicating whether the problem is thermal or not.
logLevel	integer	0	Log level
maxCompFractionChange	real64	0.5	Maximum (absolute) change in a component fraction in a Newton iteration
maxRelativePressureChange	real64	0.5	Maximum (relative) change in pressure in a Newton iteration (expected value between 0 and 1)
maxRelativeTemperatureChange	real64	0.5	Maximum (relative) change in temperature in a Newton iteration (expected value between 0 and 1)
name	string	required	A name is required for any non-unique nodes
solutionChangeScalingFactor	real64	0.5	Damping factor for solution change targets
targetPhaseVolFractionChangeInTimeStep	real64	0.2	Target (absolute) change in phase volume fraction in a time step
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
targetRelativePressureChangeInTimeStep	real64	0.2	Target (relative) change in pressure in a time step (expected value between 0 and 1)
targetRelativeTemperatureChangeInTimeStep	real64	0.2	Target (relative) change in temperature in a time step (expected value between 0 and 1)
temperature	real64	required	Temperature
useMass	integer	0	Use mass formulation instead of molar
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: CompositionalMultiphaseReservoir

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
flowSolverName	string	required	Name of the flow solver used by the coupled solver
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
wellSolverName	string	required	Name of the well solver used by the coupled solver
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: CompositionalMultiphaseStatistics

Name	Type	Default	Description
computeCFLNumbers	integer	0	Flag to decide whether CFL numbers are computed or not
computeRegionStatistics	integer	1	Flag to decide whether region statistics are computed or not
flowSolverName	string	required	Name of the flow solver
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes

Element: CompositionalMultiphaseWell

Name	Type	Default	Description
allowLocalCompDensityChopping	integer	1	Flag indicating whether local (cell-wise) chopping of negative compositions is allowed
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
maxCompFractionChange	real64	1	Maximum (absolute) change in a component fraction between two Newton iterations
maxRelativePressureChange	real64	1	Maximum (relative) change in pressure between two Newton iterations (recommended with rate control)
name	string	required	A name is required for any non-unique nodes
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
useMass	integer	0	Use mass formulation instead of molar
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters
WellControls	node		Element: WellControls

Element: CompressibleSinglePhaseFluid

Name	Type	Default	Description
compressibility	real64	0	Fluid compressibility
defaultDensity	real64	required	Default value for density.
defaultViscosity	real64	required	Default value for viscosity.
densityModelType	geosx_constitutive_ExponentApproximationType	linear	Type of density model. Valid options: * exponential * linear * quadratic
name	string	required	A name is required for any non-unique nodes
referenceDensity	real64	1000	Reference fluid density
referencePressure	real64	0	Reference pressure
referenceViscosity	real64	0.001	Reference fluid viscosity
viscosibility	real64	0	Fluid viscosity exponential coefficient
viscosityModelType	geosx_constitutive_ExponentApproximationType	linear	Type of viscosity model. Valid options: * exponential * linear * quadratic

Element: CompressibleSolidCarmanKozenyPermeability

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
permeabilityModelName	string	required	Name of the permeability model.
porosityModelName	string	required	Name of the porosity model.
solidInternalEnergyModelName	string		Name of the solid internal energy model.
solidModelName	string	required	Name of the solid model.

Element: CompressibleSolidConstantPermeability

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
permeabilityModelName	string	required	Name of the permeability model.
porosityModelName	string	required	Name of the porosity model.
solidInternalEnergyModelName	string		Name of the solid internal energy model.
solidModelName	string	required	Name of the solid model.

Element: CompressibleSolidParallelPlatesPermeability

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
permeabilityModelName	string	required	Name of the permeability model.
porosityModelName	string	required	Name of the porosity model.
solidInternalEnergyModelName	string		Name of the solid internal energy model.
solidModelName	string	required	Name of the solid model.

Element: CompressibleSolidSlipDependentPermeability

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
permeabilityModelName	string	required	Name of the permeability model.
porosityModelName	string	required	Name of the porosity model.
solidInternalEnergyModelName	string		Name of the solid internal energy model.
solidModelName	string	required	Name of the solid model.

Element: ConstantPermeability

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
permeabilityComponents	R1Tensor	required	xx, yy and zz components of a diagonal permeability tensor.

Element: Constitutive

Name	Type	Default	Description
BiotPorosity	node		Element: BiotPorosity
BlackOilFluid	node		Element: BlackOilFluid
BrooksCoreyBakerRelativePermeability	node		Element: BrooksCoreyBakerRelativePermeability
BrooksCoreyCapillaryPressure	node		Element: BrooksCoreyCapillaryPressure
BrooksCoreyRelativePermeability	node		Element: BrooksCoreyRelativePermeability
CO2BrineEzrokhiFluid	node		Element: CO2BrineEzrokhiFluid
CO2BrineEzrokhiThermalFluid	node		Element: CO2BrineEzrokhiThermalFluid
CO2BrinePhillipsFluid	node		Element: CO2BrinePhillipsFluid
CO2BrinePhillipsThermalFluid	node		Element: CO2BrinePhillipsThermalFluid
CarmanKozenyPermeability	node		Element: CarmanKozenyPermeability
CompositionalMultiphaseFluid	node		Element: CompositionalMultiphaseFluid
CompressibleSinglePhaseFluid	node		Element: CompressibleSinglePhaseFluid
CompressibleSolidCarmanKozenyPermeability	node		Element: CompressibleSolidCarmanKozenyPermeability
CompressibleSolidConstantPermeability	node		Element: CompressibleSolidConstantPermeability
CompressibleSolidParallelPlatesPermeability	node		Element: CompressibleSolidParallelPlatesPermeability
CompressibleSolidSlipDependentPermeability	node		Element: CompressibleSolidSlipDependentPermeability
ConstantPermeability	node		Element: ConstantPermeability
Coulomb	node		Element: Coulomb
DamageElasticIsotropic	node		Element: DamageElasticIsotropic
DamageSpectralElasticIsotropic	node		Element: DamageSpectralElasticIsotropic
DamageVolDevElasticIsotropic	node		Element: DamageVolDevElasticIsotropic
DeadOilFluid	node		Element: DeadOilFluid
DelftEgg	node		Element: DelftEgg
DruckerPrager	node		Element: DruckerPrager
ElasticIsotropic	node		Element: ElasticIsotropic
ElasticIsotropicPressureDependent	node		Element: ElasticIsotropicPressureDependent
ElasticOrthotropic	node		Element: ElasticOrthotropic
ElasticTransverseIsotropic	node		Element: ElasticTransverseIsotropic
ExtendedDruckerPrager	node		Element: ExtendedDruckerPrager
FrictionlessContact	node		Element: FrictionlessContact
JFunctionCapillaryPressure	node		Element: JFunctionCapillaryPressure
ModifiedCamClay	node		Element: ModifiedCamClay
MultiPhaseConstantThermalConductivity	node		Element: MultiPhaseConstantThermalConductivity
MultiPhaseVolumeWeightedThermalConductivity	node		Element: MultiPhaseVolumeWeightedThermalConductivity
NullModel	node		Element: NullModel
ParallelPlatesPermeability	node		Element: ParallelPlatesPermeability
ParticleFluid	node		Element: ParticleFluid
PermeabilityBase	node		Element: PermeabilityBase
PorousDelftEgg	node		Element: PorousDelftEgg
PorousDruckerPrager	node		Element: PorousDruckerPrager
PorousElasticIsotropic	node		Element: PorousElasticIsotropic
PorousElasticOrthotropic	node		Element: PorousElasticOrthotropic
PorousElasticTransverseIsotropic	node		Element: PorousElasticTransverseIsotropic
PorousExtendedDruckerPrager	node		Element: PorousExtendedDruckerPrager
PorousModifiedCamClay	node		Element: PorousModifiedCamClay
PressurePorosity	node		Element: PressurePorosity
ProppantPermeability	node		Element: ProppantPermeability
ProppantPorosity	node		Element: ProppantPorosity
ProppantSlurryFluid	node		Element: ProppantSlurryFluid
ProppantSolidProppantPermeability	node		Element: ProppantSolidProppantPermeability
SinglePhaseConstantThermalConductivity	node		Element: SinglePhaseConstantThermalConductivity
SlipDependentPermeability	node		Element: SlipDependentPermeability
SolidInternalEnergy	node		Element: SolidInternalEnergy
TableCapillaryPressure	node		Element: TableCapillaryPressure
TableRelativePermeability	node		Element: TableRelativePermeability
TableRelativePermeabilityHysteresis	node		Element: TableRelativePermeabilityHysteresis
ThermalCompressibleSinglePhaseFluid	node		Element: ThermalCompressibleSinglePhaseFluid
VanGenuchtenBakerRelativePermeability	node		Element: VanGenuchtenBakerRelativePermeability
VanGenuchtenCapillaryPressure	node		Element: VanGenuchtenCapillaryPressure

Element: Coulomb

Name	Type	Default	Description
apertureTableName	string	required	Name of the aperture table
apertureTolerance	real64	1e-09	Value to be used to avoid floating point errors in expressions involving aperture. For example in the case of dividing by the actual aperture (not the effective aperture that results from the aperture function) this value may be used to avoid the 1/0 error. Note that this value may have some physical significance in its usage, as it may be used to smooth out highly nonlinear behavior associated with 1/0 in addition to avoiding the 1/0 error.
cohesion	real64	required	Cohesion
displacementJumpThreshold	real64	2.22045e-16	A threshold valued to determine whether a fracture is open or not.
frictionCoefficient	real64	required	Friction coefficient
name	string	required	A name is required for any non-unique nodes
penaltyStiffness	real64	0	Value of the penetration penalty stiffness. Units of Pressure/length
shearStiffness	real64	0	Value of the shear elastic stiffness. Units of Pressure/length

Element: Cylinder

Name	Type	Default	Description
innerRadius	real64	-1	Inner radius of the anulus
name	string	required	A name is required for any non-unique nodes
point1	R1Tensor	required	Center point of one (upper or lower) face of the cylinder
point2	R1Tensor	required	Center point of the other face of the cylinder
radius	real64	required	Radius of the cylinder

Element: DamageElasticIsotropic

Name	Type	Default	Description
compressiveStrength	real64	0	Compressive strength from the uniaxial compression test
criticalFractureEnergy	real64	required	Critical fracture energy
criticalStrainEnergy	real64	required	Critical stress in a 1d tension test
defaultBulkModulus	real64	-1	Default Bulk Modulus Parameter
defaultDensity	real64	required	Default Material Density
defaultPoissonRatio	real64	-1	Default Poisson’s Ratio
defaultShearModulus	real64	-1	Default Shear Modulus Parameter
defaultYoungModulus	real64	-1	Default Young’s Modulus
degradationLowerLimit	real64	0	The lower limit of the degradation function
deltaCoefficient	real64	-1	Coefficient in the calculation of the external driving force
extDrivingForceFlag	integer	0	Whether to have external driving force. Can be 0 or 1
lengthScale	real64	required	Length scale l in the phase-field equation
name	string	required	A name is required for any non-unique nodes
tensileStrength	real64	0	Tensile strength from the uniaxial tension test

Element: DamageSpectralElasticIsotropic

Name	Type	Default	Description
compressiveStrength	real64	0	Compressive strength from the uniaxial compression test
criticalFractureEnergy	real64	required	Critical fracture energy
criticalStrainEnergy	real64	required	Critical stress in a 1d tension test
defaultBulkModulus	real64	-1	Default Bulk Modulus Parameter
defaultDensity	real64	required	Default Material Density
defaultPoissonRatio	real64	-1	Default Poisson’s Ratio
defaultShearModulus	real64	-1	Default Shear Modulus Parameter
defaultYoungModulus	real64	-1	Default Young’s Modulus
degradationLowerLimit	real64	0	The lower limit of the degradation function
deltaCoefficient	real64	-1	Coefficient in the calculation of the external driving force
extDrivingForceFlag	integer	0	Whether to have external driving force. Can be 0 or 1
lengthScale	real64	required	Length scale l in the phase-field equation
name	string	required	A name is required for any non-unique nodes
tensileStrength	real64	0	Tensile strength from the uniaxial tension test

Element: DamageVolDevElasticIsotropic

Name	Type	Default	Description
compressiveStrength	real64	0	Compressive strength from the uniaxial compression test
criticalFractureEnergy	real64	required	Critical fracture energy
criticalStrainEnergy	real64	required	Critical stress in a 1d tension test
defaultBulkModulus	real64	-1	Default Bulk Modulus Parameter
defaultDensity	real64	required	Default Material Density
defaultPoissonRatio	real64	-1	Default Poisson’s Ratio
defaultShearModulus	real64	-1	Default Shear Modulus Parameter
defaultYoungModulus	real64	-1	Default Young’s Modulus
degradationLowerLimit	real64	0	The lower limit of the degradation function
deltaCoefficient	real64	-1	Coefficient in the calculation of the external driving force
extDrivingForceFlag	integer	0	Whether to have external driving force. Can be 0 or 1
lengthScale	real64	required	Length scale l in the phase-field equation
name	string	required	A name is required for any non-unique nodes
tensileStrength	real64	0	Tensile strength from the uniaxial tension test

Element: DeadOilFluid

Name	Type	Default	Description
componentMolarWeight	real64_array	required	Component molar weights
componentNames	string_array	{}	List of component names
hydrocarbonFormationVolFactorTableNames	string_array	{}	List of formation volume factor TableFunction names from the Functions block. The user must provide one TableFunction per hydrocarbon phase, in the order provided in “phaseNames”. For instance, if “oil” is before “gas” in “phaseNames”, the table order should be: oilTableName, gasTableName
hydrocarbonViscosityTableNames	string_array	{}	List of viscosity TableFunction names from the Functions block. The user must provide one TableFunction per hydrocarbon phase, in the order provided in “phaseNames”. For instance, if “oil” is before “gas” in “phaseNames”, the table order should be: oilTableName, gasTableName
name	string	required	A name is required for any non-unique nodes
phaseNames	string_array	required	List of fluid phases
surfaceDensities	real64_array	required	List of surface mass densities for each phase
tableFiles	path_array	{}	List of filenames with input PVT tables (one per phase)
waterCompressibility	real64	0	Water compressibility
waterFormationVolumeFactor	real64	0	Water formation volume factor
waterReferencePressure	real64	0	Water reference pressure
waterViscosity	real64	0	Water viscosity

Element: DelftEgg

Name	Type	Default	Description
defaultBulkModulus	real64	-1	Default Bulk Modulus Parameter
defaultCslSlope	real64	1	Slope of the critical state line
defaultDensity	real64	required	Default Material Density
defaultPoissonRatio	real64	-1	Default Poisson’s Ratio
defaultPreConsolidationPressure	real64	-1.5	Initial preconsolidation pressure
defaultRecompressionIndex	real64	0.002	Recompresion Index
defaultShapeParameter	real64	1	Shape parameter for the yield surface
defaultShearModulus	real64	-1	Default Shear Modulus Parameter
defaultVirginCompressionIndex	real64	0.005	Virgin compression index
defaultYoungModulus	real64	-1	Default Young’s Modulus
name	string	required	A name is required for any non-unique nodes

Element: Dirichlet

Name	Type	Default	Description
bcApplicationTableName	string		Name of table that specifies the on/off application of the boundary condition.
beginTime	real64	-1e+99	Time at which the boundary condition will start being applied.
component	integer	-1	Component of field (if tensor) to apply boundary condition to.
direction	R1Tensor	{0,0,0}	Direction to apply boundary condition to.
endTime	real64	1e+99	Time at which the boundary condition will stop being applied.
fieldName	string		Name of field that boundary condition is applied to.
functionName	string		Name of function that specifies variation of the boundary condition.
initialCondition	integer	0	Boundary condition is applied as an initial condition.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
objectPath	string		Path to the target field
scale	real64	0	Scale factor for value of the boundary condition.
setNames	string_array	required	Name of sets that boundary condition is applied to.

Element: DruckerPrager

Name	Type	Default	Description
defaultBulkModulus	real64	-1	Default Bulk Modulus Parameter
defaultCohesion	real64	0	Initial cohesion
defaultDensity	real64	required	Default Material Density
defaultDilationAngle	real64	30	Dilation angle (degrees)
defaultFrictionAngle	real64	30	Friction angle (degrees)
defaultHardeningRate	real64	0	Cohesion hardening/softening rate
defaultPoissonRatio	real64	-1	Default Poisson’s Ratio
defaultShearModulus	real64	-1	Default Shear Modulus Parameter
defaultYoungModulus	real64	-1	Default Young’s Modulus
name	string	required	A name is required for any non-unique nodes

Element: ElasticIsotropic

Name	Type	Default	Description
defaultBulkModulus	real64	-1	Default Bulk Modulus Parameter
defaultDensity	real64	required	Default Material Density
defaultPoissonRatio	real64	-1	Default Poisson’s Ratio
defaultShearModulus	real64	-1	Default Shear Modulus Parameter
defaultYoungModulus	real64	-1	Default Young’s Modulus
name	string	required	A name is required for any non-unique nodes

Element: ElasticIsotropicPressureDependent

Name	Type	Default	Description
defaultDensity	real64	required	Default Material Density
defaultRecompressionIndex	real64	0.002	Recompresion Index
defaultRefPressure	real64	-1	Reference Pressure
defaultRefStrainVol	real64	0	Reference Volumetric Strain
defaultShearModulus	real64	-1	Elastic Shear Modulus Parameter
name	string	required	A name is required for any non-unique nodes

Element: ElasticOrthotropic

Name	Type	Default	Description
defaultC11	real64	-1	Default C11 Component of Voigt Stiffness Tensor
defaultC12	real64	-1	Default C12 Component of Voigt Stiffness Tensor
defaultC13	real64	-1	Default C13 Component of Voigt Stiffness Tensor
defaultC22	real64	-1	Default C22 Component of Voigt Stiffness Tensor
defaultC23	real64	-1	Default C23 Component of Voigt Stiffness Tensor
defaultC33	real64	-1	Default C33 Component of Voigt Stiffness Tensor
defaultC44	real64	-1	Default C44 Component of Voigt Stiffness Tensor
defaultC55	real64	-1	Default C55 Component of Voigt Stiffness Tensor
defaultC66	real64	-1	Default C66 Component of Voigt Stiffness Tensor
defaultDensity	real64	required	Default Material Density
defaultE1	real64	-1	Default Young’s Modulus E1
defaultE2	real64	-1	Default Young’s Modulus E2
defaultE3	real64	-1	Default Young’s Modulus E3
defaultG12	real64	-1	Default Shear Modulus G12
defaultG13	real64	-1	Default Shear Modulus G13
defaultG23	real64	-1	Default Shear Modulus G23
defaultNu12	real64	-1	Default Poission’s Ratio Nu12
defaultNu13	real64	-1	Default Poission’s Ratio Nu13
defaultNu23	real64	-1	Default Poission’s Ratio Nu23
name	string	required	A name is required for any non-unique nodes

Element: ElasticSEM

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
discretization	string	required	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
dtSeismoTrace	real64	0	Time step for output pressure at receivers
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
outputSeismoTrace	integer	0	Flag that indicates if we write the seismo trace in a file .txt, 0 no output, 1 otherwise
receiverCoordinates	real64_array2d	required	Coordinates (x,y,z) of the receivers
rickerOrder	integer	2	Flag that indicates the order of the Ricker to be used o, 1 or 2. Order 2 by default
sourceCoordinates	real64_array2d	required	Coordinates (x,y,z) of the sources
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
timeSourceFrequency	real32	required	Central frequency for the time source
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: ElasticTransverseIsotropic

Name	Type	Default	Description
defaultC11	real64	-1	Default Stiffness Parameter C11
defaultC13	real64	-1	Default Stiffness Parameter C13
defaultC33	real64	-1	Default Stiffness Parameter C33
defaultC44	real64	-1	Default Stiffness Parameter C44
defaultC66	real64	-1	Default Stiffness Parameter C66
defaultDensity	real64	required	Default Material Density
defaultPoissonRatioAxialTransverse	real64	-1	Default Axial-Transverse Poisson’s Ratio
defaultPoissonRatioTransverse	real64	-1	Default Transverse Poisson’s Ratio
defaultShearModulusAxialTransverse	real64	-1	Default Axial-Transverse Shear Modulus
defaultYoungModulusAxial	real64	-1	Default Axial Young’s Modulus
defaultYoungModulusTransverse	real64	-1	Default Transverse Young’s Modulus
name	string	required	A name is required for any non-unique nodes

Element: ElementRegions

Name	Type	Default	Description
CellElementRegion	node		Element: CellElementRegion
SurfaceElementRegion	node		Element: SurfaceElementRegion
WellElementRegion	node		Element: WellElementRegion

Element: EmbeddedSurfaceGenerator

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
discretization	string	required	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
fractureRegion	string	FractureRegion	(no description available)
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
mpiCommOrder	integer	0	Flag to enable MPI consistent communication ordering
name	string	required	A name is required for any non-unique nodes
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: Events

Name	Type	Default	Description
logLevel	integer	0	Log level
maxCycle	integer	2147483647	Maximum simulation cycle for the global event loop.
maxTime	real64	1.79769e+308	Maximum simulation time for the global event loop.
minTime	real64	0	Start simulation time for the global event loop.
HaltEvent	node		Element: HaltEvent
PeriodicEvent	node		Element: PeriodicEvent
SoloEvent	node		Element: SoloEvent

Element: ExtendedDruckerPrager

Name	Type	Default	Description
defaultBulkModulus	real64	-1	Default Bulk Modulus Parameter
defaultCohesion	real64	0	Initial cohesion
defaultDensity	real64	required	Default Material Density
defaultDilationRatio	real64	1	Dilation ratio [0,1] (ratio = tan dilationAngle / tan frictionAngle)
defaultHardening	real64	0	Hardening parameter (hardening rate is faster for smaller values)
defaultInitialFrictionAngle	real64	30	Initial friction angle (degrees)
defaultPoissonRatio	real64	-1	Default Poisson’s Ratio
defaultResidualFrictionAngle	real64	30	Residual friction angle (degrees)
defaultShearModulus	real64	-1	Default Shear Modulus Parameter
defaultYoungModulus	real64	-1	Default Young’s Modulus
name	string	required	A name is required for any non-unique nodes

Element: FieldSpecification

Name	Type	Default	Description
bcApplicationTableName	string		Name of table that specifies the on/off application of the boundary condition.
beginTime	real64	-1e+99	Time at which the boundary condition will start being applied.
component	integer	-1	Component of field (if tensor) to apply boundary condition to.
direction	R1Tensor	{0,0,0}	Direction to apply boundary condition to.
endTime	real64	1e+99	Time at which the boundary condition will stop being applied.
fieldName	string		Name of field that boundary condition is applied to.
functionName	string		Name of function that specifies variation of the boundary condition.
initialCondition	integer	0	Boundary condition is applied as an initial condition.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
objectPath	string		Path to the target field
scale	real64	0	Scale factor for value of the boundary condition.
setNames	string_array	required	Name of sets that boundary condition is applied to.

Element: FieldSpecifications

Name	Type	Default	Description
Aquifer	node		Element: Aquifer
Dirichlet	node		Element: Dirichlet
FieldSpecification	node		Element: FieldSpecification
HydrostaticEquilibrium	node		Element: HydrostaticEquilibrium
PML	node		Element: PML
SourceFlux	node		Element: SourceFlux
Traction	node		Element: Traction

Element: File

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes

Element: FiniteElementSpace

Name	Type	Default	Description
formulation	string	default	Specifier to indicate any specialized formuations. For instance, one of the many enhanced assumed strain methods of the Hexahedron parent shape would be indicated here
name	string	required	A name is required for any non-unique nodes
order	integer	required	The order of the finite element basis.
useVirtualElements	integer	0	Specifier to indicate whether to force the use of VEM

Element: FiniteElements

Name	Type	Default	Description
FiniteElementSpace	node		Element: FiniteElementSpace
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: FiniteVolume

Name	Type	Default	Description
HybridMimeticDiscretization	node		Element: HybridMimeticDiscretization
TwoPointFluxApproximation	node		Element: TwoPointFluxApproximation

Element: FlowProppantTransport

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
flowSolverName	string	required	Name of the flow solver used by the coupled solver
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
proppantSolverName	string	required	Name of the proppant solver used by the coupled solver
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: FrictionlessContact

Name	Type	Default	Description
apertureTableName	string	required	Name of the aperture table
apertureTolerance	real64	1e-09	Value to be used to avoid floating point errors in expressions involving aperture. For example in the case of dividing by the actual aperture (not the effective aperture that results from the aperture function) this value may be used to avoid the 1/0 error. Note that this value may have some physical significance in its usage, as it may be used to smooth out highly nonlinear behavior associated with 1/0 in addition to avoiding the 1/0 error.
displacementJumpThreshold	real64	2.22045e-16	A threshold valued to determine whether a fracture is open or not.
name	string	required	A name is required for any non-unique nodes
penaltyStiffness	real64	0	Value of the penetration penalty stiffness. Units of Pressure/length
shearStiffness	real64	0	Value of the shear elastic stiffness. Units of Pressure/length

Element: Functions

Name	Type	Default	Description
CompositeFunction	node		Element: CompositeFunction
MultivariableTableFunction	node		Element: MultivariableTableFunction
SymbolicFunction	node		Element: SymbolicFunction
TableFunction	node		Element: TableFunction

Element: Geometry

Name	Type	Default	Description
BoundedPlane	node		Element: BoundedPlane
Box	node		Element: Box
Cylinder	node		Element: Cylinder
ThickPlane	node		Element: ThickPlane

Element: HaltEvent

Name	Type	Default	Description
beginTime	real64	0	Start time of this event.
endTime	real64	1e+100	End time of this event.
finalDtStretch	real64	0.001	Allow the final dt request for this event to grow by this percentage to match the endTime exactly.
forceDt	real64	-1	While active, this event will request this timestep value (ignoring any children/targets requests).
logLevel	integer	0	Log level
maxEventDt	real64	-1	While active, this event will request a timestep <= this value (depending upon any child/target requests).
maxRuntime	real64	required	The maximum allowable runtime for the job.
name	string	required	A name is required for any non-unique nodes
target	string		Name of the object to be executed when the event criteria are met.
targetExactStartStop	integer	1	If this option is set, the event will reduce its timestep requests to match any specified beginTime/endTimes exactly.
HaltEvent	node		Element: HaltEvent
PeriodicEvent	node		Element: PeriodicEvent
SoloEvent	node		Element: SoloEvent

Element: HybridMimeticDiscretization

Name	Type	Default	Description
innerProductType	string	required	Type of inner product used in the hybrid FVM solver
name	string	required	A name is required for any non-unique nodes

Element: Hydrofracture

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
contactRelationName	string	required	Name of contact relation to enforce constraints on fracture boundary.
couplingTypeOption	geosx_HydrofractureSolver_CouplingTypeOption	required	Coupling method. Valid options: * FIM * SIM_FixedStress
flowSolverName	string	required	Name of the flow solver used by the coupled solver
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
maxNumResolves	integer	10	Value to indicate how many resolves may be executed to perform surface generation after the execution of flow and mechanics solver.
name	string	required	A name is required for any non-unique nodes
solidSolverName	string	required	Name of the solid solver used by the coupled solver
surfaceGeneratorName	string	required	Name of the surface generator to use in the hydrofracture solver
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: HydrostaticEquilibrium

Name	Type	Default	Description
bcApplicationTableName	string		Name of table that specifies the on/off application of the boundary condition.
beginTime	real64	-1e+99	Time at which the boundary condition will start being applied.
componentFractionVsElevationTableNames	string_array	{}	Names of the tables specifying the (component fraction vs elevation) relationship for each component
componentNames	string_array	{}	Names of the fluid components
datumElevation	real64	required	Datum elevation [m]
datumPressure	real64	required	Datum pressure [Pa]
direction	R1Tensor	{0,0,0}	Direction to apply boundary condition to.
elevationIncrementInHydrostaticPressureTable	real64	0.6096	Elevation increment [m] in the hydrostatic pressure table constructed internally
endTime	real64	1e+99	Time at which the boundary condition will stop being applied.
equilibrationTolerance	real64	0.001	Tolerance in the fixed-point iteration scheme used for hydrostatic initialization
functionName	string		Name of function that specifies variation of the boundary condition.
initialPhaseName	string		Name of the phase initially saturating the reservoir
logLevel	integer	0	Log level
maxNumberOfEquilibrationIterations	integer	5	Maximum number of equilibration iterations
name	string	required	A name is required for any non-unique nodes
objectPath	string		Path to the target field
scale	real64	0	Scale factor for value of the boundary condition.
temperatureVsElevationTableName	string		Name of the table specifying the (temperature [K] vs elevation) relationship

Element: Included

Name	Type	Default	Description
File	node		Element: File

Element: InternalMesh

Name	Type	Default	Description
cellBlockNames	string_array	required	Names of each mesh block
elementTypes	string_array	required	Element types of each mesh block
name	string	required	A name is required for any non-unique nodes
nx	integer_array	required	Number of elements in the x-direction within each mesh block
ny	integer_array	required	Number of elements in the y-direction within each mesh block
nz	integer_array	required	Number of elements in the z-direction within each mesh block
positionTolerance	real64	1e-10	A position tolerance to verify if a node belong to a nodeset
trianglePattern	integer	0	Pattern by which to decompose the hex mesh into wedges
xBias	real64_array	{1}	Bias of element sizes in the x-direction within each mesh block (dx_left=(1+b)*L/N, dx_right=(1-b)*L/N)
xCoords	real64_array	required	x-coordinates of each mesh block vertex
yBias	real64_array	{1}	Bias of element sizes in the y-direction within each mesh block (dy_left=(1+b)*L/N, dx_right=(1-b)*L/N)
yCoords	real64_array	required	y-coordinates of each mesh block vertex
zBias	real64_array	{1}	Bias of element sizes in the z-direction within each mesh block (dz_left=(1+b)*L/N, dz_right=(1-b)*L/N)
zCoords	real64_array	required	z-coordinates of each mesh block vertex

Element: InternalWell

Name	Type	Default	Description
logLevel	integer	0	Log level
meshName	string	required	Name of the reservoir mesh associated with this well
minElementLength	real64	0.001	Minimum length of a well element, computed as (segment length / number of elements per segment ) [m]
minSegmentLength	real64	0.01	Minimum length of a well segment [m]
name	string	required	A name is required for any non-unique nodes
numElementsPerSegment	integer	required	Number of well elements per polyline segment
polylineNodeCoords	real64_array2d	required	Physical coordinates of the well polyline nodes
polylineSegmentConn	globalIndex_array2d	required	Connectivity of the polyline segments
radius	real64	required	Radius of the well [m]
wellControlsName	string	required	Name of the set of constraints associated with this well
wellRegionName	string	required	Name of the well element region
Perforation	node		Element: Perforation

Element: InternalWellbore

Name	Type	Default	Description
autoSpaceRadialElems	real64_array	{-1}	Automatically set number and spacing of elements in the radial direction. This overrides the values of nr!Value in each block indicates factor to scale the radial increment.Larger numbers indicate larger radial elements.
cartesianMappingInnerRadius	real64	1e+99	If using a Cartesian aligned outer boundary, this is inner radius at which to start the mapping.
cellBlockNames	string_array	required	Names of each mesh block
elementTypes	string_array	required	Element types of each mesh block
hardRadialCoords	real64_array	{0}	Sets the radial spacing to specified values
name	string	required	A name is required for any non-unique nodes
nr	integer_array	required	Number of elements in the radial direction
nt	integer_array	required	Number of elements in the tangent direction
nz	integer_array	required	Number of elements in the z-direction within each mesh block
positionTolerance	real64	1e-10	A position tolerance to verify if a node belong to a nodeset
rBias	real64_array	{-0.8}	Bias of element sizes in the radial direction
radius	real64_array	required	Wellbore radius
theta	real64_array	required	Tangent angle defining geometry size: 90 for quarter, 180 for half and 360 for full wellbore geometry
trajectory	real64_array2d	{{0}}	Coordinates defining the wellbore trajectory
trianglePattern	integer	0	Pattern by which to decompose the hex mesh into wedges
useCartesianOuterBoundary	integer	1000000	Enforce a Cartesian aligned outer boundary on the outer block starting with the radial block specified in this value
xBias	real64_array	{1}	Bias of element sizes in the x-direction within each mesh block (dx_left=(1+b)*L/N, dx_right=(1-b)*L/N)
yBias	real64_array	{1}	Bias of element sizes in the y-direction within each mesh block (dy_left=(1+b)*L/N, dx_right=(1-b)*L/N)
zBias	real64_array	{1}	Bias of element sizes in the z-direction within each mesh block (dz_left=(1+b)*L/N, dz_right=(1-b)*L/N)
zCoords	real64_array	required	z-coordinates of each mesh block vertex

Element: JFunctionCapillaryPressure

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
nonWettingIntermediateJFunctionTableName	string		J-function table (dimensionless) for the pair (non-wetting phase, intermediate phase) Note that this input is only used for three-phase flow. If you want to do a two-phase simulation, please use instead wettingNonWettingJFunctionTableName to specify the table names.
nonWettingIntermediateSurfaceTension	real64	0	Surface tension [N/m] for the pair (non-wetting phase, intermediate phase) If you have a value in [dyne/cm], divide it by 1000 to obtain the value in [N/m] Note that this input is only used for three-phase flow. If you want to do a two-phase simulation, please use instead wettingNonWettingSurfaceTension to specify the surface tensions.
permeabilityDirection	geosx_constitutive_JFunctionCapillaryPressure_PermeabilityDirection	required	Permeability direction. Options are: XY - use the average of the permeabilities in the x and y directions, X - only use the permeability in the x direction, Y - only use the permeability in the y direction, Z - only use the permeability in the z direction.
permeabilityExponent	real64	0.5	Permeability exponent
phaseNames	string_array	required	List of fluid phases
porosityExponent	real64	0.5	Porosity exponent
wettingIntermediateJFunctionTableName	string		J-function table (dimensionless) for the pair (wetting phase, intermediate phase) Note that this input is only used for three-phase flow. If you want to do a two-phase simulation, please use instead wettingNonWettingJFunctionTableName to specify the table names.
wettingIntermediateSurfaceTension	real64	0	Surface tension [N/m] for the pair (wetting phase, intermediate phase) If you have a value in [dyne/cm], divide it by 1000 to obtain the value in [N/m] Note that this input is only used for three-phase flow. If you want to do a two-phase simulation, please use instead wettingNonWettingSurfaceTension to specify the surface tensions.
wettingNonWettingJFunctionTableName	string		J-function table (dimensionless) for the pair (wetting phase, non-wetting phase) Note that this input is only used for two-phase flow. If you want to do a three-phase simulation, please use instead wettingIntermediateJFunctionTableName and nonWettingIntermediateJFunctionTableName to specify the table names.
wettingNonWettingSurfaceTension	real64	0	Surface tension [N/m] for the pair (wetting phase, non-wetting phase) If you have a value in [dyne/cm], divide it by 1000 to obtain the value in [N/m] Note that this input is only used for two-phase flow. If you want to do a three-phase simulation, please use instead wettingIntermediateSurfaceTension and nonWettingIntermediateSurfaceTension to specify the surface tensions.

Element: LagrangianContact

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
contactRelationName	string	required	Name of contact relation to enforce constraints on fracture boundary.
discretization	string	required	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
fractureRegionName	string	required	Name of the fracture region.
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
solidSolverName	string	required	Name of the solid mechanics solver in the rock matrix
stabilizationName	string	required	Name of the stabilization to use in the lagrangian contact solver
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: LaplaceFEM

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
discretization	string	required	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
fieldName	string	required	Name of field variable
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
timeIntegrationOption	geosx_LaplaceBaseH1_TimeIntegrationOption	required	Time integration method. Options are: * SteadyState * ImplicitTransient
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: LinearSolverParameters

Name	Type	Default	Description
amgAggresiveCoarseningLevels	integer	0	AMG number levels for aggressive coarsening Available options are: TODO
amgCoarseSolver	geosx_LinearSolverParameters_AMG_CoarseType	direct	AMG coarsest level solver/smoother type. Available options are: default\|jacobi\|l1jacobi\|fgs\|sgs\|l1sgs\|chebyshev\|direct\|bgs
amgCoarseningType	string	HMIS	AMG coarsening algorithm Available options are: TODO
amgInterpolationType	integer	6	AMG interpolation algorithm Available options are: TODO
amgNullSpaceType	geosx_LinearSolverParameters_AMG_NullSpaceType	constantModes	AMG near null space approximation. Available options are:constantModes\|rigidBodyModes
amgNumFunctions	integer	1	AMG number of functions Available options are: TODO
amgNumSweeps	integer	2	AMG smoother sweeps
amgSmootherType	geosx_LinearSolverParameters_AMG_SmootherType	fgs	AMG smoother type. Available options are: default\|jacobi\|l1jacobi\|fgs\|bgs\|sgs\|l1sgs\|chebyshev\|ilu0\|ilut\|ic0\|ict
amgThreshold	real64	0	AMG strength-of-connection threshold
directCheckResidual	integer	0	Whether to check the linear system solution residual
directColPerm	geosx_LinearSolverParameters_Direct_ColPerm	metis	How to permute the columns. Available options are: none\|MMD_AtplusA\|MMD_AtA\|colAMD\|metis\|parmetis
directEquil	integer	1	Whether to scale the rows and columns of the matrix
directIterRef	integer	1	Whether to perform iterative refinement
directParallel	integer	1	Whether to use a parallel solver (instead of a serial one)
directReplTinyPivot	integer	1	Whether to replace tiny pivots by sqrt(epsilon)*norm(A)
directRowPerm	geosx_LinearSolverParameters_Direct_RowPerm	mc64	How to permute the rows. Available options are: none\|mc64
iluFill	integer	0	ILU(K) fill factor
iluThreshold	real64	0	ILU(T) threshold factor
krylovAdaptiveTol	integer	0	Use Eisenstat-Walker adaptive linear tolerance
krylovMaxIter	integer	200	Maximum iterations allowed for an iterative solver
krylovMaxRestart	integer	200	Maximum iterations before restart (GMRES only)
krylovTol	real64	1e-06	Relative convergence tolerance of the iterative method If the method converges, the iterative solution is such that the relative residual norm satisfies: < krylovTol *
krylovWeakestTol	real64	0.001	Weakest-allowed tolerance for adaptive method
logLevel	integer	0	Log level
preconditionerType	geosx_LinearSolverParameters_PreconditionerType	iluk	Preconditioner type. Available options are: none\|jacobi\|l1jacobi\|fgs\|sgs\|l1sgs\|chebyshev\|iluk\|ilut\|icc\|ict\|amg\|mgr\|block\|direct\|bgs
solverType	geosx_LinearSolverParameters_SolverType	direct	Linear solver type. Available options are: direct\|cg\|gmres\|fgmres\|bicgstab\|preconditioner
stopIfError	integer	1	Whether to stop the simulation if the linear solver reports an error

Element: Mesh

Name	Type	Default	Description
InternalMesh	node		Element: InternalMesh
InternalWell	node		Element: InternalWell
InternalWellbore	node		Element: InternalWellbore
PAMELAMesh	node		Element: PAMELAMesh
VTKMesh	node		Element: VTKMesh

Element: ModifiedCamClay

Name	Type	Default	Description
defaultCslSlope	real64	1	Slope of the critical state line
defaultDensity	real64	required	Default Material Density
defaultPreConsolidationPressure	real64	-1.5	Initial preconsolidation pressure
defaultRecompressionIndex	real64	0.002	Recompresion Index
defaultRefPressure	real64	-1	Reference Pressure
defaultRefStrainVol	real64	0	Reference Volumetric Strain
defaultShearModulus	real64	-1	Elastic Shear Modulus Parameter
defaultVirginCompressionIndex	real64	0.005	Virgin compression index
name	string	required	A name is required for any non-unique nodes

Element: MultiPhaseConstantThermalConductivity

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
phaseNames	string_array	required	List of fluid phases
thermalConductivityComponents	R1Tensor	required	xx, yy, and zz components of a diagonal thermal conductivity tensor [J/(s.m.K)]

Element: MultiPhaseVolumeWeightedThermalConductivity

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
phaseNames	string_array	required	List of fluid phases
phaseThermalConductivity	real64_array	required	Phase thermal conductivity [W/(m.K)]
rockThermalConductivityComponents	R1Tensor	required	xx, yy, and zz components of a diagonal rock thermal conductivity tensor [W/(m.K)]

Element: MultiphasePoromechanics

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
flowSolverName	string	required	Name of the flow solver used by the coupled solver
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
solidSolverName	string	required	Name of the solid solver used by the coupled solver
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: MultiphasePoromechanicsReservoir

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
poromechanicsSolverName	string	required	Name of the poromechanics solver used by the coupled solver
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
wellSolverName	string	required	Name of the well solver used by the coupled solver
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: MultivariableTableFunction

Name	Type	Default	Description
inputVarNames	string_array	{}	Name of fields are input to function.
name	string	required	A name is required for any non-unique nodes

Element: NonlinearSolverParameters

Name	Type	Default	Description
allowNonConverged	integer	0	Allow non-converged solution to be accepted. (i.e. exit from the Newton loop without achieving the desired tolerance)
lineSearchAction	geosx_NonlinearSolverParameters_LineSearchAction	Attempt	How the line search is to be used. Options are: * None - Do not use line search. * Attempt - Use line search. Allow exit from line search without achieving smaller residual than starting residual. * Require - Use line search. If smaller residual than starting resdual is not achieved, cut time step.
lineSearchCutFactor	real64	0.5	Line search cut factor. For instance, a value of 0.5 will result in the effective application of the last solution by a factor of (0.5, 0.25, 0.125, …)
lineSearchInterpolationType	geosx_NonlinearSolverParameters_LineSearchInterpolationType	Linear	Strategy to cut the solution update during the line search. Options are: * Linear * Parabolic
lineSearchMaxCuts	integer	4	Maximum number of line search cuts.
logLevel	integer	0	Log level
maxAllowedResidualNorm	real64	1e+09	Maximum value of residual norm that is allowed in a Newton loop
maxNumConfigurationAttempts	integer	10	Max number of times that the configuration can be changed
maxSubSteps	integer	10	Maximum number of time sub-steps allowed for the solver
maxTimeStepCuts	integer	2	Max number of time step cuts
newtonMaxIter	integer	5	Maximum number of iterations that are allowed in a Newton loop.
newtonMinIter	integer	1	Minimum number of iterations that are required before exiting the Newton loop.
newtonTol	real64	1e-06	The required tolerance in order to exit the Newton iteration loop.
timeStepCutFactor	real64	0.5	Factor by which the time step will be cut if a timestep cut is required.
timeStepDecreaseFactor	real64	0.5	Factor by which the time step is decreased when the number of Newton iterations is large.
timeStepDecreaseIterLimit	real64	0.7	Fraction of the max Newton iterations above which the solver asks for the time-step to be decreased for the next time step.
timeStepIncreaseFactor	real64	2	Factor by which the time step is increased when the number of Newton iterations is small.
timeStepIncreaseIterLimit	real64	0.4	Fraction of the max Newton iterations below which the solver asks for the time-step to be increased for the next time step.

Element: NullModel

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes

Element: NumericalMethods

Name	Type	Default	Description
FiniteElements	node	unique	Element: FiniteElements
FiniteVolume	node	unique	Element: FiniteVolume

Element: Outputs

Name	Type	Default	Description
Blueprint	node		Element: Blueprint
ChomboIO	node		Element: ChomboIO
Python	node		Element: Python
Restart	node		Element: Restart
Silo	node		Element: Silo
TimeHistory	node		Element: TimeHistory
VTK	node		Element: VTK

Element: PAMELAMesh

Name	Type	Default	Description
fieldNamesInGEOSX	string_array	{}	Names of fields in GEOSX to import into
fieldsToImport	string_array	{}	Fields to be imported from the external mesh file
file	path	required	Path to the mesh file
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
scale	R1Tensor	{1,1,1}	Scale the coordinates of the vertices by given scale factors (after translation)
translate	R1Tensor	{0,0,0}	Translate the coordinates of the vertices by a given vector (prior to scaling)

Element: PML

Name	Type	Default	Description
bcApplicationTableName	string		Name of table that specifies the on/off application of the boundary condition.
beginTime	real64	-1e+99	Time at which the boundary condition will start being applied.
component	integer	-1	Component of field (if tensor) to apply boundary condition to.
direction	R1Tensor	{0,0,0}	Direction to apply boundary condition to.
endTime	real64	1e+99	Time at which the boundary condition will stop being applied.
functionName	string		Name of function that specifies variation of the boundary condition.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
objectPath	string		Path to the target field
reflectivity	real32	0.001	Desired reflectivity of the PML region, used to compute the damping profile
scale	real64	0	Scale factor for value of the boundary condition.
setNames	string_array	required	Name of sets that boundary condition is applied to.
thicknessMaxXYZ	R1Tensor32	{-1,-1,-1}	Thickness of the PML region, at right, back, and bottom sides, used to compute the damping profile
thicknessMinXYZ	R1Tensor32	{-1,-1,-1}	Thickness of the PML region, at left, front, and top sides, used to compute the damping profile
waveSpeedMaxXYZ	R1Tensor32	{-1,-1,-1}	Wave speed in the PML, at right, back, and bottom sides, used to compute the damping profile
waveSpeedMinXYZ	R1Tensor32	{-1,-1,-1}	Wave speed in the PML, at left, front, and top sides, used to compute the damping profile
xMax	R1Tensor32	{3.40282e+38,3.40282e+38,3.40282e+38}	Maximum (x,y,z) coordinates of the inner PML boundaries
xMin	R1Tensor32	{-3.40282e+38,-3.40282e+38,-3.40282e+38}	Minimum (x,y,z) coordinates of the inner PML boundaries

Element: PVTDriver

Name	Type	Default	Description
baseline	path	none	Baseline file
feedComposition	real64_array	required	Feed composition array [mol fraction]
fluid	string	required	Fluid to test
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
output	string	none	Output file
pressureControl	string	required	Function controlling pressure time history
steps	integer	required	Number of load steps to take
temperatureControl	string	required	Function controlling temperature time history

Element: PackCollection

Name	Type	Default	Description
fieldName	string	required	The name of the (packable) field associated with the specified object to retrieve data from
name	string	required	A name is required for any non-unique nodes
objectPath	string	required	The name of the object from which to retrieve field values.
onlyOnSetChange	integer	0	Whether or not to only collect when the collected sets of indices change in any way.
setNames	string_array	{}	The set(s) for which to retrieve data.

Element: ParallelPlatesPermeability

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes

Element: Parameter

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
value	string	required	Input parameter definition for the preprocessor

Element: Parameters

Name	Type	Default	Description
Parameter	node		Element: Parameter

Element: ParticleFluid

Name	Type	Default	Description
collisionAlpha	real64	1.27	Collision alpha coefficient
collisionBeta	real64	1.5	Collision beta coefficient
fluidViscosity	real64	0.001	Fluid viscosity
hinderedSettlingCoefficient	real64	5.9	Hindered settling coefficient
isCollisionalSlip	integer	0	Whether the collisional component of the slip velocity is considered
maxProppantConcentration	real64	0.6	Max proppant concentration
name	string	required	A name is required for any non-unique nodes
particleSettlingModel	geosx_constitutive_ParticleSettlingModel	required	Particle settling velocity model. Valid options: * Stokes * Intermediate * Turbulence
proppantDensity	real64	1400	Proppant density
proppantDiameter	real64	0.0002	Proppant diameter
slipConcentration	real64	0.1	Slip concentration
sphericity	real64	1	Sphericity

Element: Perforation

Name	Type	Default	Description
distanceFromHead	real64	required	Linear distance from well head to the perforation
name	string	required	A name is required for any non-unique nodes
transmissibility	real64	-1	Perforation transmissibility

Element: PeriodicEvent

Name	Type	Default	Description
beginTime	real64	0	Start time of this event.
cycleFrequency	integer	1	Event application frequency (cycle, default)
endTime	real64	1e+100	End time of this event.
finalDtStretch	real64	0.001	Allow the final dt request for this event to grow by this percentage to match the endTime exactly.
forceDt	real64	-1	While active, this event will request this timestep value (ignoring any children/targets requests).
function	string		Name of an optional function to evaluate when the time/cycle criteria are met.If the result is greater than the specified eventThreshold, the function will continue to execute.
logLevel	integer	0	Log level
maxEventDt	real64	-1	While active, this event will request a timestep <= this value (depending upon any child/target requests).
name	string	required	A name is required for any non-unique nodes
object	string		If the optional function requires an object as an input, specify its path here.
set	string		If the optional function is applied to an object, specify the setname to evaluate (default = everything).
stat	integer	0	If the optional function is applied to an object, specify the statistic to compare to the eventThreshold.The current options include: min, avg, and max.
target	string		Name of the object to be executed when the event criteria are met.
targetExactStartStop	integer	1	If this option is set, the event will reduce its timestep requests to match any specified beginTime/endTimes exactly.
targetExactTimestep	integer	1	If this option is set, the event will reduce its timestep requests to match the specified timeFrequency perfectly: dt_request = min(dt_request, t_last + time_frequency - time)).
threshold	real64	0	If the optional function is used, the event will execute if the value returned by the function exceeds this threshold.
timeFrequency	real64	-1	Event application frequency (time). Note: if this value is specified, it will override any cycle-based behavior.
HaltEvent	node		Element: HaltEvent
PeriodicEvent	node		Element: PeriodicEvent
SoloEvent	node		Element: SoloEvent

Element: PermeabilityBase

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes

Element: PhaseFieldDamageFEM

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
damageUpperBound	real64	1.5	The upper bound of the damage
discretization	string	required	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
fieldName	string	required	name of field variable
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
irreversibilityFlag	integer	0	The flag to indicate whether to apply the irreversibility constraint
localDissipation	string	required	Type of local dissipation function. Can be Linear or Quadratic
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
timeIntegrationOption	string	required	option for default time integration method
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: PhaseFieldFracture

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
couplingTypeOption	geosx_PhaseFieldFractureSolver_CouplingTypeOption	required	Coupling option. Valid options: * FixedStress * TightlyCoupled
damageSolverName	string	required	Name of the damage mechanics solver to use in the PhaseFieldFracture solver
discretization	string	required	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
solidSolverName	string	required	Name of the solid mechanics solver to use in the PhaseFieldFracture solver
subcycling	integer	required	turn on subcycling on each load step
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: PorousDelftEgg

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
permeabilityModelName	string	required	Name of the permeability model.
porosityModelName	string	required	Name of the porosity model.
solidInternalEnergyModelName	string		Name of the solid internal energy model.
solidModelName	string	required	Name of the solid model.

Element: PorousDruckerPrager

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
permeabilityModelName	string	required	Name of the permeability model.
porosityModelName	string	required	Name of the porosity model.
solidInternalEnergyModelName	string		Name of the solid internal energy model.
solidModelName	string	required	Name of the solid model.

Element: PorousElasticIsotropic

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
permeabilityModelName	string	required	Name of the permeability model.
porosityModelName	string	required	Name of the porosity model.
solidInternalEnergyModelName	string		Name of the solid internal energy model.
solidModelName	string	required	Name of the solid model.

Element: PorousElasticOrthotropic

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
permeabilityModelName	string	required	Name of the permeability model.
porosityModelName	string	required	Name of the porosity model.
solidInternalEnergyModelName	string		Name of the solid internal energy model.
solidModelName	string	required	Name of the solid model.

Element: PorousElasticTransverseIsotropic

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
permeabilityModelName	string	required	Name of the permeability model.
porosityModelName	string	required	Name of the porosity model.
solidInternalEnergyModelName	string		Name of the solid internal energy model.
solidModelName	string	required	Name of the solid model.

Element: PorousExtendedDruckerPrager

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
permeabilityModelName	string	required	Name of the permeability model.
porosityModelName	string	required	Name of the porosity model.
solidInternalEnergyModelName	string		Name of the solid internal energy model.
solidModelName	string	required	Name of the solid model.

Element: PorousModifiedCamClay

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
permeabilityModelName	string	required	Name of the permeability model.
porosityModelName	string	required	Name of the porosity model.
solidInternalEnergyModelName	string		Name of the solid internal energy model.
solidModelName	string	required	Name of the solid model.

Element: PressurePorosity

Name	Type	Default	Description
compressibility	real64	required	Solid compressibility
defaultReferencePorosity	real64	required	Default value of the reference porosity
name	string	required	A name is required for any non-unique nodes
referencePressure	real64	required	Reference pressure for solid compressibility

Element: Problem

Name	Type	Default	Description
Benchmarks	node	unique	Element: Benchmarks
Constitutive	node	unique	Element: Constitutive
ElementRegions	node	unique	Element: ElementRegions
Events	node	unique, required	Element: Events
FieldSpecifications	node	unique	Element: FieldSpecifications
Functions	node	unique	Element: Functions
Geometry	node	unique	Element: Geometry
Included	node	unique	Element: Included
Mesh	node	unique, required	Element: Mesh
NumericalMethods	node	unique	Element: NumericalMethods
Outputs	node	unique, required	Element: Outputs
Parameters	node	unique	Element: Parameters
Solvers	node	unique, required	Element: Solvers
Tasks	node	unique	Element: Tasks

Element: ProppantPermeability

Name	Type	Default	Description
maxProppantConcentration	real64	required	Maximum proppant concentration.
name	string	required	A name is required for any non-unique nodes
proppantDiameter	real64	required	Proppant diameter.

Element: ProppantPorosity

Name	Type	Default	Description
defaultReferencePorosity	real64	required	Default value of the reference porosity
maxProppantConcentration	real64	required	Maximum proppant concentration
name	string	required	A name is required for any non-unique nodes

Element: ProppantSlurryFluid

Name	Type	Default	Description
componentNames	string_array	{}	List of fluid component names
compressibility	real64	0	Fluid compressibility
defaultComponentDensity	real64_array	{0}	Default value for the component density.
defaultComponentViscosity	real64_array	{0}	Default value for the component viscosity.
defaultCompressibility	real64_array	{0}	Default value for the component compressibility.
flowBehaviorIndex	real64_array	{0}	Flow behavior index
flowConsistencyIndex	real64_array	{0}	Flow consistency index
maxProppantConcentration	real64	0.6	Maximum proppant concentration
name	string	required	A name is required for any non-unique nodes
referenceDensity	real64	1000	Reference fluid density
referencePressure	real64	100000	Reference pressure
referenceProppantDensity	real64	1400	Reference proppant density
referenceViscosity	real64	0.001	Reference fluid viscosity

Element: ProppantSolidProppantPermeability

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
permeabilityModelName	string	required	Name of the permeability model.
porosityModelName	string	required	Name of the porosity model.
solidInternalEnergyModelName	string		Name of the solid internal energy model.
solidModelName	string	required	Name of the solid model.

Element: ProppantTransport

Name	Type	Default	Description
bridgingFactor	real64	0	Bridging factor used for bridging/screen-out calculation
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
criticalShieldsNumber	real64	0	Critical Shields number
discretization	string	required	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
frictionCoefficient	real64	0.03	Friction coefficient
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
inputFluxEstimate	real64	1	Initial estimate of the input flux used only for residual scaling. This should be essentially equivalent to the input flux * dt.
isThermal	integer	0	Flag indicating whether the problem is thermal or not.
logLevel	integer	0	Log level
maxProppantConcentration	real64	0.6	Maximum proppant concentration
name	string	required	A name is required for any non-unique nodes
proppantDensity	real64	2500	Proppant density
proppantDiameter	real64	0.0004	Proppant diameter
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
updateProppantPacking	integer	0	Flag that enables/disables proppant-packing update
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: Python

Name	Type	Default	Description
childDirectory	string		Child directory path
name	string	required	A name is required for any non-unique nodes
parallelThreads	integer	1	Number of plot files.

Element: ReactiveCompositionalMultiphaseOBL

Name	Type	Default	Description
OBLOperatorsTableFile	path	required	File containing OBL operator values
allowLocalOBLChopping	integer	1	Allow keeping solution within OBL limits
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
componentNames	string_array	{}	List of component names
discretization	string	required	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
enableEnergyBalance	integer	required	Enable energy balance calculation and temperature degree of freedom
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
inputFluxEstimate	real64	1	Initial estimate of the input flux used only for residual scaling. This should be essentially equivalent to the input flux * dt.
isThermal	integer	0	Flag indicating whether the problem is thermal or not.
logLevel	integer	0	Log level
maxCompFractionChange	real64	1	Maximum (absolute) change in a component fraction between two Newton iterations
name	string	required	A name is required for any non-unique nodes
numComponents	integer	required	Number of components
numPhases	integer	required	Number of phases
phaseNames	string_array	{}	List of fluid phases
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
transMultExp	real64	1	Exponent of dynamic transmissibility multiplier
useDARTSL2Norm	integer	1	Use L2 norm calculation similar to one used DARTS
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: Restart

Name	Type	Default	Description
childDirectory	string		Child directory path
name	string	required	A name is required for any non-unique nodes
parallelThreads	integer	1	Number of plot files.

Element: Run

Name	Type	Default	Description
args	string		Any extra command line arguments to pass to GEOSX.
autoPartition	string		May be ‘Off’ or ‘On’, if ‘On’ partitioning arguments are created automatically. Default is Off.
name	string	required	The name of this benchmark.
nodes	integer	required	The number of nodes needed to run the benchmark.
strongScaling	integer_array	{0}	Repeat the benchmark N times, scaling the number of nodes in the benchmark by these values.
tasksPerNode	integer	required	The number of tasks per node to run the benchmark with.
threadsPerTask	integer	0	The number of threads per task to run the benchmark with.
timeLimit	integer	0	The time limit of the benchmark.

Element: Silo

Name	Type	Default	Description
childDirectory	string		Child directory path
fieldNames	string_array	{}	Names of the fields to output. If this attribute is specified, GEOSX outputs all (and only) the fields specified by the user, regardless of their plotLevel
name	string	required	A name is required for any non-unique nodes
onlyPlotSpecifiedFieldNames	integer	0	If this flag is equal to 1, then we only plot the fields listed in fieldNames. Otherwise, we plot all the fields with the required plotLevel, plus the fields listed in fieldNames
parallelThreads	integer	1	Number of plot files.
plotFileRoot	string	plot	(no description available)
plotLevel	integer	1	(no description available)
writeCellElementMesh	integer	1	(no description available)
writeEdgeMesh	integer	0	(no description available)
writeFEMFaces	integer	0	(no description available)
writeFaceElementMesh	integer	1	(no description available)

Element: SinglePhaseConstantThermalConductivity

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
thermalConductivityComponents	R1Tensor	required	xx, yy, and zz components of a diagonal thermal conductivity tensor [J/(s.m.K)]

Element: SinglePhaseFVM

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
discretization	string	required	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
inputFluxEstimate	real64	1	Initial estimate of the input flux used only for residual scaling. This should be essentially equivalent to the input flux * dt.
isThermal	integer	0	Flag indicating whether the problem is thermal or not.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
temperature	real64	0	Temperature
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: SinglePhaseHybridFVM

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
discretization	string	required	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
inputFluxEstimate	real64	1	Initial estimate of the input flux used only for residual scaling. This should be essentially equivalent to the input flux * dt.
isThermal	integer	0	Flag indicating whether the problem is thermal or not.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
temperature	real64	0	Temperature
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: SinglePhasePoromechanics

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
flowSolverName	string	required	Name of the flow solver used by the coupled solver
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
solidSolverName	string	required	Name of the solid solver used by the coupled solver
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: SinglePhasePoromechanicsEmbeddedFractures

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
flowSolverName	string	required	Name of the flow solver used by the coupled solver
fracturesSolverName	string	required	Name of the fractures solver to use in the fractured poroelastic solver
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
solidSolverName	string	required	Name of the solid solver used by the coupled solver
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: SinglePhasePoromechanicsReservoir

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
poromechanicsSolverName	string	required	Name of the poromechanics solver used by the coupled solver
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
wellSolverName	string	required	Name of the well solver used by the coupled solver
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: SinglePhaseProppantFVM

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
discretization	string	required	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
inputFluxEstimate	real64	1	Initial estimate of the input flux used only for residual scaling. This should be essentially equivalent to the input flux * dt.
isThermal	integer	0	Flag indicating whether the problem is thermal or not.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
temperature	real64	0	Temperature
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: SinglePhaseReservoir

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
flowSolverName	string	required	Name of the flow solver used by the coupled solver
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
wellSolverName	string	required	Name of the well solver used by the coupled solver
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: SinglePhaseStatistics

Name	Type	Default	Description
flowSolverName	string	required	Name of the flow solver
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes

Element: SinglePhaseWell

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters
WellControls	node		Element: WellControls

Element: SlipDependentPermeability

Name	Type	Default	Description
initialPermeability	R1Tensor	required	initial permeability of the fracture.
maxPermMultiplier	real64	required	Maximum permeability multiplier.
name	string	required	A name is required for any non-unique nodes
shearDispThreshold	real64	required	Threshold of shear displacement.

Element: SolidInternalEnergy

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
referenceInternalEnergy	real64	required	Internal energy at the reference temperature [J/kg]
referenceTemperature	real64	required	Reference temperature [K]
volumetricHeatCapacity	real64	required	Solid volumetric heat capacity [J/(kg.K)]

Element: SolidMechanicsEmbeddedFractures

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
contactRelationName	string	required	Name of contact relation to enforce constraints on fracture boundary.
fractureRegionName	string	required	Name of the fracture region.
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
solidSolverName	string	required	Name of the solid mechanics solver in the rock matrix
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
useStaticCondensation	integer	0	Defines whether to use static condensation or not.
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: SolidMechanicsLagrangianSSLE

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
contactRelationName	string	NOCONTACT	Name of contact relation to enforce constraints on fracture boundary.
discretization	string	required	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
massDamping	real64	0	Value of mass based damping coefficient.
maxNumResolves	integer	10	Value to indicate how many resolves may be executed after some other event is executed. For example, if a SurfaceGenerator is specified, it will be executed after the mechanics solve. However if a new surface is generated, then the mechanics solve must be executed again due to the change in topology.
name	string	required	A name is required for any non-unique nodes
newmarkBeta	real64	0.25	Value of in the Newmark Method for Implicit Dynamic time integration option. This should be pow(newmarkGamma+0.5,2.0)/4.0 unless you know what you are doing.
newmarkGamma	real64	0.5	Value of in the Newmark Method for Implicit Dynamic time integration option
stiffnessDamping	real64	0	Value of stiffness based damping coefficient.
strainTheory	integer	0	Indicates whether or not to use Infinitesimal Strain Theory, or Finite Strain Theory. Valid Inputs are: 0 - Infinitesimal Strain 1 - Finite Strain
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
timeIntegrationOption	geosx_SolidMechanicsLagrangianFEM_TimeIntegrationOption	ExplicitDynamic	Time integration method. Options are: * QuasiStatic * ImplicitDynamic * ExplicitDynamic
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: SolidMechanicsStateReset

Name	Type	Default	Description
disableInelasticity	integer	0	Flag to enable/disable inelastic behavior
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
resetDisplacements	integer	1	Flag to reset displacements (and velocities)
solidSolverName	string	required	Name of the solid mechanics solver

Element: SolidMechanicsStatistics

Name	Type	Default	Description
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
solidSolverName	string	required	Name of the solid solver

Element: SolidMechanics_LagrangianFEM

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
contactRelationName	string	NOCONTACT	Name of contact relation to enforce constraints on fracture boundary.
discretization	string	required	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
massDamping	real64	0	Value of mass based damping coefficient.
maxNumResolves	integer	10	Value to indicate how many resolves may be executed after some other event is executed. For example, if a SurfaceGenerator is specified, it will be executed after the mechanics solve. However if a new surface is generated, then the mechanics solve must be executed again due to the change in topology.
name	string	required	A name is required for any non-unique nodes
newmarkBeta	real64	0.25	Value of in the Newmark Method for Implicit Dynamic time integration option. This should be pow(newmarkGamma+0.5,2.0)/4.0 unless you know what you are doing.
newmarkGamma	real64	0.5	Value of in the Newmark Method for Implicit Dynamic time integration option
stiffnessDamping	real64	0	Value of stiffness based damping coefficient.
strainTheory	integer	0	Indicates whether or not to use Infinitesimal Strain Theory, or Finite Strain Theory. Valid Inputs are: 0 - Infinitesimal Strain 1 - Finite Strain
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
timeIntegrationOption	geosx_SolidMechanicsLagrangianFEM_TimeIntegrationOption	ExplicitDynamic	Time integration method. Options are: * QuasiStatic * ImplicitDynamic * ExplicitDynamic
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: SoloEvent

Name	Type	Default	Description
beginTime	real64	0	Start time of this event.
endTime	real64	1e+100	End time of this event.
finalDtStretch	real64	0.001	Allow the final dt request for this event to grow by this percentage to match the endTime exactly.
forceDt	real64	-1	While active, this event will request this timestep value (ignoring any children/targets requests).
logLevel	integer	0	Log level
maxEventDt	real64	-1	While active, this event will request a timestep <= this value (depending upon any child/target requests).
name	string	required	A name is required for any non-unique nodes
target	string		Name of the object to be executed when the event criteria are met.
targetCycle	integer	-1	Targeted cycle to execute the event.
targetExactStartStop	integer	1	If this option is set, the event will reduce its timestep requests to match any specified beginTime/endTimes exactly.
targetExactTimestep	integer	1	If this option is set, the event will reduce its timestep requests to match the specified execution time exactly: dt_request = min(dt_request, t_target - time)).
targetTime	real64	-1	Targeted time to execute the event.
HaltEvent	node		Element: HaltEvent
PeriodicEvent	node		Element: PeriodicEvent
SoloEvent	node		Element: SoloEvent

Element: Solvers

Name	Type	Default	Description
gravityVector	R1Tensor	{0,0,-9.81}	Gravity vector used in the physics solvers
AcousticSEM	node		Element: AcousticSEM
CompositionalMultiphaseFVM	node		Element: CompositionalMultiphaseFVM
CompositionalMultiphaseHybridFVM	node		Element: CompositionalMultiphaseHybridFVM
CompositionalMultiphaseReservoir	node		Element: CompositionalMultiphaseReservoir
CompositionalMultiphaseWell	node		Element: CompositionalMultiphaseWell
ElasticSEM	node		Element: ElasticSEM
EmbeddedSurfaceGenerator	node		Element: EmbeddedSurfaceGenerator
FlowProppantTransport	node		Element: FlowProppantTransport
Hydrofracture	node		Element: Hydrofracture
LagrangianContact	node		Element: LagrangianContact
LaplaceFEM	node		Element: LaplaceFEM
MultiphasePoromechanics	node		Element: MultiphasePoromechanics
MultiphasePoromechanicsReservoir	node		Element: MultiphasePoromechanicsReservoir
PhaseFieldDamageFEM	node		Element: PhaseFieldDamageFEM
PhaseFieldFracture	node		Element: PhaseFieldFracture
ProppantTransport	node		Element: ProppantTransport
ReactiveCompositionalMultiphaseOBL	node		Element: ReactiveCompositionalMultiphaseOBL
SinglePhaseFVM	node		Element: SinglePhaseFVM
SinglePhaseHybridFVM	node		Element: SinglePhaseHybridFVM
SinglePhasePoromechanics	node		Element: SinglePhasePoromechanics
SinglePhasePoromechanicsEmbeddedFractures	node		Element: SinglePhasePoromechanicsEmbeddedFractures
SinglePhasePoromechanicsReservoir	node		Element: SinglePhasePoromechanicsReservoir
SinglePhaseProppantFVM	node		Element: SinglePhaseProppantFVM
SinglePhaseReservoir	node		Element: SinglePhaseReservoir
SinglePhaseWell	node		Element: SinglePhaseWell
SolidMechanicsEmbeddedFractures	node		Element: SolidMechanicsEmbeddedFractures
SolidMechanicsLagrangianSSLE	node		Element: SolidMechanicsLagrangianSSLE
SolidMechanics_LagrangianFEM	node		Element: SolidMechanics_LagrangianFEM
SurfaceGenerator	node		Element: SurfaceGenerator

Element: SourceFlux

Name	Type	Default	Description
bcApplicationTableName	string		Name of table that specifies the on/off application of the boundary condition.
beginTime	real64	-1e+99	Time at which the boundary condition will start being applied.
component	integer	-1	Component of field (if tensor) to apply boundary condition to.
direction	R1Tensor	{0,0,0}	Direction to apply boundary condition to.
endTime	real64	1e+99	Time at which the boundary condition will stop being applied.
fieldName	string		Name of field that boundary condition is applied to.
functionName	string		Name of function that specifies variation of the boundary condition.
initialCondition	integer	0	Boundary condition is applied as an initial condition.
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
objectPath	string		Path to the target field
scale	real64	0	Scale factor for value of the boundary condition.
setNames	string_array	required	Name of sets that boundary condition is applied to.

Element: SurfaceElementRegion

Name	Type	Default	Description
defaultAperture	real64	required	The default aperture of newly formed surface elements.
faceBlock	string	FractureSubRegion	The name of the face block in the mesh, or the embedded surface.
materialList	string_array	required	List of materials present in this region
meshBody	string		Mesh body that contains this region
name	string	required	A name is required for any non-unique nodes
subRegionType	geosx_SurfaceElementRegion_SurfaceSubRegionType	faceElement	Type of surface element subregion. Valid options: * faceElement * embeddedElement

Element: SurfaceGenerator

Name	Type	Default	Description
cflFactor	real64	0.5	Factor to apply to the CFL condition when calculating the maximum allowable time step. Values should be in the interval (0,1]
fractureRegion	string	Fracture	(no description available)
initialDt	real64	1e+99	Initial time-step value required by the solver to the event manager.
logLevel	integer	0	Log level
mpiCommOrder	integer	0	Flag to enable MPI consistent communication ordering
name	string	required	A name is required for any non-unique nodes
nodeBasedSIF	integer	0	Flag for choosing between node or edge based criteria: 1 for node based criterion
rockToughness	real64	required	Rock toughness of the solid material
targetRegions	string_array	required	Allowable regions that the solver may be applied to. Note that this does not indicate that the solver will be applied to these regions, only that allocation will occur such that the solver may be applied to these regions. The decision about what regions this solver will beapplied to rests in the EventManager.
LinearSolverParameters	node	unique	Element: LinearSolverParameters
NonlinearSolverParameters	node	unique	Element: NonlinearSolverParameters

Element: SymbolicFunction

Name	Type	Default	Description
expression	string	required	Symbolic math expression
inputVarNames	string_array	{}	Name of fields are input to function.
name	string	required	A name is required for any non-unique nodes
variableNames	string_array	required	List of variables in expression. The order must match the evaluate argument

Element: TableCapillaryPressure

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
nonWettingIntermediateCapPressureTableName	string		Capillary pressure table [Pa] for the pair (non-wetting phase, intermediate phase) Note that this input is only used for three-phase flow. If you want to do a two-phase simulation, please use instead wettingNonWettingCapPressureTableName to specify the table names
phaseNames	string_array	required	List of fluid phases
wettingIntermediateCapPressureTableName	string		Capillary pressure table [Pa] for the pair (wetting phase, intermediate phase) Note that this input is only used for three-phase flow. If you want to do a two-phase simulation, please use instead wettingNonWettingCapPressureTableName to specify the table names
wettingNonWettingCapPressureTableName	string		Capillary pressure table [Pa] for the pair (wetting phase, non-wetting phase) Note that this input is only used for two-phase flow. If you want to do a three-phase simulation, please use instead wettingIntermediateCapPressureTableName and nonWettingIntermediateCapPressureTableName to specify the table names

Element: TableFunction

Name	Type	Default	Description
coordinateFiles	path_array	{}	List of coordinate file names for ND Table
coordinates	real64_array	{0}	Coordinates inputs for 1D tables
inputVarNames	string_array	{}	Name of fields are input to function.
interpolation	geosx_TableFunction_InterpolationType	linear	Interpolation method. Valid options: * linear * nearest * upper * lower
name	string	required	A name is required for any non-unique nodes
values	real64_array	{0}	Values for 1D tables
voxelFile	path		Voxel file name for ND Table

Element: TableRelativePermeability

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
nonWettingIntermediateRelPermTableNames	string_array	{}	List of relative permeability tables for the pair (non-wetting phase, intermediate phase) The expected format is “{ nonWettingPhaseRelPermTableName, intermediatePhaseRelPermTableName }”, in that order Note that this input is only used for three-phase flow. If you want to do a two-phase simulation, please use instead wettingNonWettingRelPermTableNames to specify the table names
phaseNames	string_array	required	List of fluid phases
wettingIntermediateRelPermTableNames	string_array	{}	List of relative permeability tables for the pair (wetting phase, intermediate phase) The expected format is “{ wettingPhaseRelPermTableName, intermediatePhaseRelPermTableName }”, in that order Note that this input is only used for three-phase flow. If you want to do a two-phase simulation, please use instead wettingNonWettingRelPermTableNames to specify the table names
wettingNonWettingRelPermTableNames	string_array	{}	List of relative permeability tables for the pair (wetting phase, non-wetting phase) The expected format is “{ wettingPhaseRelPermTableName, nonWettingPhaseRelPermTableName }”, in that order Note that this input is only used for two-phase flow. If you want to do a three-phase simulation, please use instead wettingIntermediateRelPermTableNames and nonWettingIntermediateRelPermTableNames to specify the table names

Element: TableRelativePermeabilityHysteresis

Name	Type	Default	Description
drainageNonWettingIntermediateRelPermTableNames	string_array	{}	List of drainage relative permeability tables for the pair (non-wetting phase, intermediate phase) The expected format is “{ nonWettingPhaseRelPermTableName, intermediatePhaseRelPermTableName }”, in that order Note that this input is only used for three-phase flow. If you want to do a two-phase simulation, please use instead drainageWettingNonWettingRelPermTableNames to specify the table names
drainageWettingIntermediateRelPermTableNames	string_array	{}	List of drainage relative permeability tables for the pair (wetting phase, intermediate phase) The expected format is “{ wettingPhaseRelPermTableName, intermediatePhaseRelPermTableName }”, in that order Note that this input is only used for three-phase flow. If you want to do a two-phase simulation, please use instead drainageWettingNonWettingRelPermTableNames to specify the table names
drainageWettingNonWettingRelPermTableNames	string_array	{}	List of drainage relative permeability tables for the pair (wetting phase, non-wetting phase) The expected format is “{ wettingPhaseRelPermTableName, nonWettingPhaseRelPermTableName }”, in that order Note that this input is only used for two-phase flow. If you want to do a three-phase simulation, please use instead drainageWettingIntermediateRelPermTableNames and drainageNonWettingIntermediateRelPermTableNames to specify the table names
imbibitionNonWettingRelPermTableName	string		Imbibition relative permeability table name for the non-wetting phase. To neglect hysteresis on this phase, just use the same table name for the drainage and imbibition curves
imbibitionWettingRelPermTableName	string		Imbibition relative permeability table name for the wetting phase. To neglect hysteresis on this phase, just use the same table name for the drainage and imbibition curves
jerauldParameterA	real64	0.1	First parameter (modification parameter) introduced by Jerauld in the Land trapping model (see RTD documentation).
jerauldParameterB	real64	0	Second parameter introduced by Jerauld in the Land trapping model (see RTD documentation).
killoughCurvatureParameter	real64	1	Curvature parameter introduced by Killough for wetting-phase hysteresis (see RTD documentation).
name	string	required	A name is required for any non-unique nodes
phaseNames	string_array	required	List of fluid phases

Element: Tasks

Name	Type	Default	Description
CompositionalMultiphaseStatistics	node		Element: CompositionalMultiphaseStatistics
PVTDriver	node		Element: PVTDriver
PackCollection	node		Element: PackCollection
SinglePhaseStatistics	node		Element: SinglePhaseStatistics
SolidMechanicsStateReset	node		Element: SolidMechanicsStateReset
SolidMechanicsStatistics	node		Element: SolidMechanicsStatistics
TriaxialDriver	node		Element: TriaxialDriver

Element: ThermalCompressibleSinglePhaseFluid

Name	Type	Default	Description
compressibility	real64	0	Fluid compressibility
defaultDensity	real64	required	Default value for density.
defaultViscosity	real64	required	Default value for viscosity.
densityModelType	geosx_constitutive_ExponentApproximationType	linear	Type of density model. Valid options: * exponential * linear * quadratic
internalEnergyModelType	geosx_constitutive_ExponentApproximationType	linear	Type of internal energy model. Valid options: * exponential * linear * quadratic
name	string	required	A name is required for any non-unique nodes
referenceDensity	real64	1000	Reference fluid density
referenceInternalEnergy	real64	0.001	Reference fluid internal energy
referencePressure	real64	0	Reference pressure
referenceTemperature	real64	0	Reference temperature
referenceViscosity	real64	0.001	Reference fluid viscosity
thermalExpansionCoeff	real64	0	Fluid thermal expansion coefficient. Unit: 1/K
viscosibility	real64	0	Fluid viscosity exponential coefficient
viscosityModelType	geosx_constitutive_ExponentApproximationType	linear	Type of viscosity model. Valid options: * exponential * linear * quadratic
volumetricHeatCapacity	real64	0	Fluid volumetric heat capacity. Unit: J/kg/K

Element: ThickPlane

Name	Type	Default	Description
name	string	required	A name is required for any non-unique nodes
normal	R1Tensor	required	Normal (n_x,n_y,n_z) to the plane (will be normalized automatically)
origin	R1Tensor	required	Origin point (x,y,z) of the plane (basically, any point on the plane)
thickness	real64	required	The total thickness of the plane (with half to each side)

Element: TimeHistory

Name	Type	Default	Description
childDirectory	string		Child directory path
filename	string	TimeHistory	The filename to which to write time history output.
format	string	hdf	The output file format for time history output.
name	string	required	A name is required for any non-unique nodes
parallelThreads	integer	1	Number of plot files.
sources	string_array	required	A list of collectors from which to collect and output time history information.

Element: Traction

Name	Type	Default	Description
bcApplicationTableName	string		Name of table that specifies the on/off application of the boundary condition.
beginTime	real64	-1e+99	Time at which the boundary condition will start being applied.
direction	R1Tensor	{0,0,0}	Direction to apply boundary condition to.
endTime	real64	1e+99	Time at which the boundary condition will stop being applied.
functionName	string		Name of function that specifies variation of the boundary condition.
initialCondition	integer	0	Boundary condition is applied as an initial condition.
inputStress	R2SymTensor	{0,0,0,0,0,0}	Input stress for tractionType = stress
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
objectPath	string		Path to the target field
scale	real64	0	Scale factor for value of the boundary condition.
setNames	string_array	required	Name of sets that boundary condition is applied to.
tractionType	geosx_TractionBoundaryCondition_TractionType	vector	Type of traction boundary condition. Options are: vector - traction is applied to the faces as specified from the scale and direction, normal - traction is applied to the faces as a pressure specified from the product of scale and the outward face normal, stress - traction is applied to the faces as specified by the inner product of input stress and face normal.

Element: TriaxialDriver

Name	Type	Default	Description
axialControl	string	required	Function controlling axial stress or strain (depending on test mode)
baseline	path	none	Baseline file
initialStress	real64	required	Initial stress (scalar used to set an isotropic stress state)
logLevel	integer	0	Log level
material	string	required	Solid material to test
mode	string	required	Test mode [stressControl, strainControl, mixedControl]
name	string	required	A name is required for any non-unique nodes
output	string	none	Output file
radialControl	string	required	Function controlling radial stress or strain (depending on test mode)
steps	integer	required	Number of load steps to take

Element: TwoPointFluxApproximation

Name	Type	Default	Description
areaRelTol	real64	1e-08	Relative tolerance for area calculations.
meanPermCoefficient	real64	1	(no description available)
name	string	required	A name is required for any non-unique nodes
usePEDFM	integer	0	(no description available)

Element: VTK

Name	Type	Default	Description
childDirectory	string		Child directory path
fieldNames	string_array	{}	Names of the fields to output. If this attribute is specified, GEOSX outputs all the fields specified by the user, regardless of their plotLevel
format	geosx_vtk_VTKOutputMode	binary	Output data format. Valid options: binary, ascii
name	string	required	A name is required for any non-unique nodes
onlyPlotSpecifiedFieldNames	integer	0	If this flag is equal to 1, then we only plot the fields listed in fieldNames. Otherwise, we plot all the fields with the required plotLevel, plus the fields listed in fieldNames
outputRegionType	geosx_vtk_VTKRegionTypes	all	Output region types. Valid options: cell, well, surface, all
parallelThreads	integer	1	Number of plot files.
plotFileRoot	string	VTK	Name of the root file for this output.
plotLevel	integer	1	Level detail plot. Only fields with lower of equal plot level will be output.
writeFEMFaces	integer	0	(no description available)

Element: VTKMesh

Name	Type	Default	Description
fieldNamesInGEOSX	string_array	{}	Names of fields in GEOSX to import into
fieldsToImport	string_array	{}	Fields to be imported from the external mesh file
file	path	required	Path to the mesh file
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
nodesetNames	string_array	{}	Names of the VTK nodesets to import
partitionMethod	geosx_VTKMeshGenerator_PartitionMethod	parmetis	Method (library) used to partition the mesh
partitionRefinement	integer	1	Number of partitioning refinement iterations (defaults to 1, recommended value).A value of 0 disables graph partitioning and keeps simple kd-tree partitions (not recommended). Values higher than 1 may lead to slightly improved partitioning, but yield diminishing returns.
regionAttribute	string	attribute	Name of the VTK cell attribute to use as region marker
scale	R1Tensor	{1,1,1}	Scale the coordinates of the vertices by given scale factors (after translation)
translate	R1Tensor	{0,0,0}	Translate the coordinates of the vertices by a given vector (prior to scaling)
useGlobalIds	integer	0	Controls the use of global IDs in the input file for cells and points. If set to 0 (default value), the GlobalId arrays in the input mesh are used if available, and generated otherwise. If set to a negative value, the GlobalId arrays in the input mesh are not used, and generated global Ids are automatically generated. If set to a positive value, the GlobalId arrays in the input mesh are used and required, and the simulation aborts if they are not available

Element: VanGenuchtenBakerRelativePermeability

Name	Type	Default	Description
gasOilRelPermExponentInv	real64_array	{0.5}	Rel perm power law exponent inverse for the pair (gas phase, oil phase) at residual water saturation The expected format is “{ gasExp, oilExp }”, in that order
gasOilRelPermMaxValue	real64_array	{0}	Maximum rel perm value for the pair (gas phase, oil phase) at residual water saturation The expected format is “{ gasMax, oilMax }”, in that order
name	string	required	A name is required for any non-unique nodes
phaseMinVolumeFraction	real64_array	{0}	Minimum volume fraction value for each phase
phaseNames	string_array	required	List of fluid phases
waterOilRelPermExponentInv	real64_array	{0.5}	Rel perm power law exponent inverse for the pair (water phase, oil phase) at residual gas saturation The expected format is “{ waterExp, oilExp }”, in that order
waterOilRelPermMaxValue	real64_array	{0}	Maximum rel perm value for the pair (water phase, oil phase) at residual gas saturation The expected format is “{ waterMax, oilMax }”, in that order

Element: VanGenuchtenCapillaryPressure

Name	Type	Default	Description
capPressureEpsilon	real64	1e-06	Saturation at which the extremum capillary pressure is attained; used to avoid infinite capillary pressure values for saturations close to 0 and 1
name	string	required	A name is required for any non-unique nodes
phaseCapPressureExponentInv	real64_array	{0.5}	Inverse of capillary power law exponent for each phase
phaseCapPressureMultiplier	real64_array	{1}	Entry pressure value for each phase
phaseMinVolumeFraction	real64_array	{0}	Minimum volume fraction value for each phase
phaseNames	string_array	required	List of fluid phases

Element: WellControls

Name	Type	Default	Description
control	geosx_WellControls_Control	required	Well control. Valid options: * BHP * phaseVolRate * totalVolRate * uninitialized
enableCrossflow	integer	1	Flag to enable crossflow. Currently only supported for injectors: - If the flag is set to 1, both reservoir-to-well flow and well-to-reservoir flow are allowed at the perforations. - If the flag is set to 0, we only allow well-to-reservoir flow at the perforations.
initialPressureCoefficient	real64	0.1	Tuning coefficient for the initial well pressure of rate-controlled wells: - Injector pressure at reference depth initialized as: (1+initialPressureCoefficient)*reservoirPressureAtClosestPerforation + density*g*( zRef - zPerf ) - Producer pressure at reference depth initialized as: (1-initialPressureCoefficient)*reservoirPressureAtClosestPerforation + density*g*( zRef - zPerf )
injectionStream	real64_array	{-1}	Global component densities of the injection stream [moles/m^3 or kg/m^3]
injectionTemperature	real64	-1	Temperature of the injection stream [K]
logLevel	integer	0	Log level
name	string	required	A name is required for any non-unique nodes
referenceElevation	real64	required	Reference elevation where BHP control is enforced [m]
surfacePressure	real64	0	Surface pressure used to compute volumetric rates when surface conditions are used [Pa]
surfaceTemperature	real64	0	Surface temperature used to compute volumetric rates when surface conditions are used [K]
targetBHP	real64	0	Target bottom-hole pressure [Pa]
targetBHPTableName	string		Name of the BHP table when the rate is a time dependent function
targetPhaseName	string		Name of the target phase
targetPhaseRate	real64	0	Target phase volumetric rate (if useSurfaceConditions: [surface m^3/s]; else [reservoir m^3/s])
targetPhaseRateTableName	string		Name of the phase rate table when the rate is a time dependent function
targetTotalRate	real64	0	Target total volumetric rate (if useSurfaceConditions: [surface m^3/s]; else [reservoir m^3/s])
targetTotalRateTableName	string		Name of the total rate table when the rate is a time dependent function
type	geosx_WellControls_Type	required	Well type. Valid options: * producer * injector
useSurfaceConditions	integer	0	Flag to specify whether rates are checked at surface or reservoir conditions. Equal to 1 for surface conditions, and to 0 for reservoir conditions

Element: WellElementRegion

Name	Type	Default	Description
materialList	string_array	required	List of materials present in this region
meshBody	string		Mesh body that contains this region
name	string	required	A name is required for any non-unique nodes

Element: lassen

Name	Type	Default	Description
Run	node	unique	Element: Run

Element: quartz

Name	Type	Default	Description
Run	node	unique	Element: Run

Datastructure Definitions

Datastructure: AcousticSEM

Name	Type	Description
indexSeismoTrace	integer	Count for output pressure at receivers
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
pressureNp1AtReceivers	real32_array2d	Pressure value at each receiver for each timestep
receiverConstants	real64_array2d	Constant part of the receiver for the nodes listed in m_receiverNodeIds
receiverIsLocal	integer_array	Flag that indicates whether the receiver is local to this MPI rank
receiverNodeIds	integer_array2d	Indices of the nodes (in the right order) for each receiver point
sourceConstants	real64_array2d	Constant part of the source for the nodes listed in m_sourceNodeIds
sourceIsAccessible	integer_array	Flag that indicates whether the source is accessible to this MPI rank
sourceNodeIds	integer_array2d	Indices of the nodes (in the right order) for each source point
sourceValue	real32_array2d	Source Value of the sources
usePML	integer	Flag to apply PML
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: Aquifer

Name	Type	Description
component	integer	Component of field (if tensor) to apply boundary condition to.
cumulativeFlux	real64	(no description available)
fieldName	string	Name of field that boundary condition is applied to.
objectPath	string	Path to the target field

Datastructure: Benchmarks

Name	Type	Description
lassen	node	Datastructure: lassen
quartz	node	Datastructure: quartz

Datastructure: BiotPorosity

Name	Type	Description
biotCoefficient	real64_array	Biot coefficient.
dPorosity_dPressure	real64_array2d	Derivative of rock porosity with respect to pressure
initialPorosity	real64_array2d	Initial porosity
porosity	real64_array2d	Rock porosity
porosity_n	real64_array2d	Rock porosity at the previous converged time step
referencePorosity	real64_array	Reference porosity

Datastructure: BlackOilFluid

Name	Type	Description
PVTO	geosx_constitutive_PVTOData	(no description available)
dPhaseCompFraction	LvArray_Array< double, 5, camp_int_seq< long, 0l, 1l, 2l, 3l, 4l >, int, LvArray_ChaiBuffer >	Derivative of phase component fraction with respect to pressure, temperature, and global component fractions
dPhaseDensity	real64_array4d	Derivative of phase density with respect to pressure, temperature, and global component fractions
dPhaseEnthalpy	real64_array4d	Derivative of phase enthalpy with respect to pressure, temperature, and global component fractions
dPhaseFraction	real64_array4d	Derivative of phase fraction with respect to pressure, temperature, and global component fractions
dPhaseInternalEnergy	real64_array4d	Derivative of phase internal energy with respect to pressure, temperature, and global component fractions
dPhaseMassDensity	real64_array4d	Derivative of phase mass density with respect to pressure, temperature, and global component fractions
dPhaseViscosity	real64_array4d	Derivative of phase viscosity with respect to pressure, temperature, and global component fractions
dTotalDensity	real64_array3d	Derivative of total density with respect to pressure, temperature, and global component fractions
formationVolFactorTableWrappers	LvArray_Array< geosx_TableFunction_KernelWrapper, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >	(no description available)
hydrocarbonPhaseOrder	integer_array	(no description available)
initialTotalMassDensity	real64_array2d	Initial total mass density
phaseCompFraction	real64_array4d	Phase component fraction
phaseCompFraction_n	real64_array4d	Phase component fraction at the previous converged time step
phaseDensity	real64_array3d	Phase density
phaseDensity_n	real64_array3d	Phase density at the previous converged time step
phaseEnthalpy	real64_array3d	Phase enthalpy
phaseEnthalpy_n	real64_array3d	Phase enthalpy at the previous converged time step
phaseFraction	real64_array3d	Phase fraction
phaseInternalEnergy	real64_array3d	Phase internal energy
phaseInternalEnergy_n	real64_array3d	Phase internal energy at the previous converged time step
phaseMassDensity	real64_array3d	Phase mass density
phaseOrder	integer_array	(no description available)
phaseTypes	integer_array	(no description available)
phaseViscosity	real64_array3d	Phase viscosity
totalDensity	real64_array2d	Total density
totalDensity_n	real64_array2d	Total density at the previous converged time step
useMass	integer	(no description available)
viscosityTableWrappers	LvArray_Array< geosx_TableFunction_KernelWrapper, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >	(no description available)

Datastructure: Blueprint

Name	Type	Description

Datastructure: BoundedPlane

Name	Type	Description

Datastructure: Box

Name	Type	Description
center	R1Tensor	(no description available)
cosStrike	real64	(no description available)
sinStrike	real64	(no description available)

Datastructure: BrooksCoreyBakerRelativePermeability

Name	Type	Description
dPhaseRelPerm_dPhaseVolFraction	real64_array4d	Derivative of phase relative permeability with respect to phase volume fraction
phaseOrder	integer_array	(no description available)
phaseRelPerm	real64_array3d	Phase relative permeability
phaseTrappedVolFraction	real64_array3d	Phase trapped volume fraction
phaseTypes	integer_array	(no description available)
volFracScale	real64	Factor used to scale the phase capillary pressure, defined as: one minus the sum of the phase minimum volume fractions.

Datastructure: BrooksCoreyCapillaryPressure

Name	Type	Description
dPhaseCapPressure_dPhaseVolFraction	real64_array4d	Derivative of phase capillary pressure with respect to phase volume fraction
phaseCapPressure	real64_array3d	Phase capillary pressure
phaseOrder	integer_array	(no description available)
phaseTypes	integer_array	(no description available)
volFracScale	real64	Factor used to scale the phase capillary pressure, defined as: one minus the sum of the phase minimum volume fractions.

Datastructure: BrooksCoreyRelativePermeability

Name	Type	Description
dPhaseRelPerm_dPhaseVolFraction	real64_array4d	Derivative of phase relative permeability with respect to phase volume fraction
phaseOrder	integer_array	(no description available)
phaseRelPerm	real64_array3d	Phase relative permeability
phaseTrappedVolFraction	real64_array3d	Phase trapped volume fraction
phaseTypes	integer_array	(no description available)
volFracScale	real64	Factor used to scale the phase relative permeability, defined as: one minus the sum of the phase minimum volume fractions.

Datastructure: CO2BrineEzrokhiFluid

Name	Type	Description
dPhaseCompFraction	LvArray_Array< double, 5, camp_int_seq< long, 0l, 1l, 2l, 3l, 4l >, int, LvArray_ChaiBuffer >	Derivative of phase component fraction with respect to pressure, temperature, and global component fractions
dPhaseDensity	real64_array4d	Derivative of phase density with respect to pressure, temperature, and global component fractions
dPhaseEnthalpy	real64_array4d	Derivative of phase enthalpy with respect to pressure, temperature, and global component fractions
dPhaseFraction	real64_array4d	Derivative of phase fraction with respect to pressure, temperature, and global component fractions
dPhaseInternalEnergy	real64_array4d	Derivative of phase internal energy with respect to pressure, temperature, and global component fractions
dPhaseMassDensity	real64_array4d	Derivative of phase mass density with respect to pressure, temperature, and global component fractions
dPhaseViscosity	real64_array4d	Derivative of phase viscosity with respect to pressure, temperature, and global component fractions
dTotalDensity	real64_array3d	Derivative of total density with respect to pressure, temperature, and global component fractions
initialTotalMassDensity	real64_array2d	Initial total mass density
phaseCompFraction	real64_array4d	Phase component fraction
phaseCompFraction_n	real64_array4d	Phase component fraction at the previous converged time step
phaseDensity	real64_array3d	Phase density
phaseDensity_n	real64_array3d	Phase density at the previous converged time step
phaseEnthalpy	real64_array3d	Phase enthalpy
phaseEnthalpy_n	real64_array3d	Phase enthalpy at the previous converged time step
phaseFraction	real64_array3d	Phase fraction
phaseInternalEnergy	real64_array3d	Phase internal energy
phaseInternalEnergy_n	real64_array3d	Phase internal energy at the previous converged time step
phaseMassDensity	real64_array3d	Phase mass density
phaseViscosity	real64_array3d	Phase viscosity
totalDensity	real64_array2d	Total density
totalDensity_n	real64_array2d	Total density at the previous converged time step
useMass	integer	(no description available)

Datastructure: CO2BrineEzrokhiThermalFluid

Name	Type	Description
dPhaseCompFraction	LvArray_Array< double, 5, camp_int_seq< long, 0l, 1l, 2l, 3l, 4l >, int, LvArray_ChaiBuffer >	Derivative of phase component fraction with respect to pressure, temperature, and global component fractions
dPhaseDensity	real64_array4d	Derivative of phase density with respect to pressure, temperature, and global component fractions
dPhaseEnthalpy	real64_array4d	Derivative of phase enthalpy with respect to pressure, temperature, and global component fractions
dPhaseFraction	real64_array4d	Derivative of phase fraction with respect to pressure, temperature, and global component fractions
dPhaseInternalEnergy	real64_array4d	Derivative of phase internal energy with respect to pressure, temperature, and global component fractions
dPhaseMassDensity	real64_array4d	Derivative of phase mass density with respect to pressure, temperature, and global component fractions
dPhaseViscosity	real64_array4d	Derivative of phase viscosity with respect to pressure, temperature, and global component fractions
dTotalDensity	real64_array3d	Derivative of total density with respect to pressure, temperature, and global component fractions
initialTotalMassDensity	real64_array2d	Initial total mass density
phaseCompFraction	real64_array4d	Phase component fraction
phaseCompFraction_n	real64_array4d	Phase component fraction at the previous converged time step
phaseDensity	real64_array3d	Phase density
phaseDensity_n	real64_array3d	Phase density at the previous converged time step
phaseEnthalpy	real64_array3d	Phase enthalpy
phaseEnthalpy_n	real64_array3d	Phase enthalpy at the previous converged time step
phaseFraction	real64_array3d	Phase fraction
phaseInternalEnergy	real64_array3d	Phase internal energy
phaseInternalEnergy_n	real64_array3d	Phase internal energy at the previous converged time step
phaseMassDensity	real64_array3d	Phase mass density
phaseViscosity	real64_array3d	Phase viscosity
totalDensity	real64_array2d	Total density
totalDensity_n	real64_array2d	Total density at the previous converged time step
useMass	integer	(no description available)

Datastructure: CO2BrinePhillipsFluid

Name	Type	Description
dPhaseCompFraction	LvArray_Array< double, 5, camp_int_seq< long, 0l, 1l, 2l, 3l, 4l >, int, LvArray_ChaiBuffer >	Derivative of phase component fraction with respect to pressure, temperature, and global component fractions
dPhaseDensity	real64_array4d	Derivative of phase density with respect to pressure, temperature, and global component fractions
dPhaseEnthalpy	real64_array4d	Derivative of phase enthalpy with respect to pressure, temperature, and global component fractions
dPhaseFraction	real64_array4d	Derivative of phase fraction with respect to pressure, temperature, and global component fractions
dPhaseInternalEnergy	real64_array4d	Derivative of phase internal energy with respect to pressure, temperature, and global component fractions
dPhaseMassDensity	real64_array4d	Derivative of phase mass density with respect to pressure, temperature, and global component fractions
dPhaseViscosity	real64_array4d	Derivative of phase viscosity with respect to pressure, temperature, and global component fractions
dTotalDensity	real64_array3d	Derivative of total density with respect to pressure, temperature, and global component fractions
initialTotalMassDensity	real64_array2d	Initial total mass density
phaseCompFraction	real64_array4d	Phase component fraction
phaseCompFraction_n	real64_array4d	Phase component fraction at the previous converged time step
phaseDensity	real64_array3d	Phase density
phaseDensity_n	real64_array3d	Phase density at the previous converged time step
phaseEnthalpy	real64_array3d	Phase enthalpy
phaseEnthalpy_n	real64_array3d	Phase enthalpy at the previous converged time step
phaseFraction	real64_array3d	Phase fraction
phaseInternalEnergy	real64_array3d	Phase internal energy
phaseInternalEnergy_n	real64_array3d	Phase internal energy at the previous converged time step
phaseMassDensity	real64_array3d	Phase mass density
phaseViscosity	real64_array3d	Phase viscosity
totalDensity	real64_array2d	Total density
totalDensity_n	real64_array2d	Total density at the previous converged time step
useMass	integer	(no description available)

Datastructure: CO2BrinePhillipsThermalFluid

Name	Type	Description
dPhaseCompFraction	LvArray_Array< double, 5, camp_int_seq< long, 0l, 1l, 2l, 3l, 4l >, int, LvArray_ChaiBuffer >	Derivative of phase component fraction with respect to pressure, temperature, and global component fractions
dPhaseDensity	real64_array4d	Derivative of phase density with respect to pressure, temperature, and global component fractions
dPhaseEnthalpy	real64_array4d	Derivative of phase enthalpy with respect to pressure, temperature, and global component fractions
dPhaseFraction	real64_array4d	Derivative of phase fraction with respect to pressure, temperature, and global component fractions
dPhaseInternalEnergy	real64_array4d	Derivative of phase internal energy with respect to pressure, temperature, and global component fractions
dPhaseMassDensity	real64_array4d	Derivative of phase mass density with respect to pressure, temperature, and global component fractions
dPhaseViscosity	real64_array4d	Derivative of phase viscosity with respect to pressure, temperature, and global component fractions
dTotalDensity	real64_array3d	Derivative of total density with respect to pressure, temperature, and global component fractions
initialTotalMassDensity	real64_array2d	Initial total mass density
phaseCompFraction	real64_array4d	Phase component fraction
phaseCompFraction_n	real64_array4d	Phase component fraction at the previous converged time step
phaseDensity	real64_array3d	Phase density
phaseDensity_n	real64_array3d	Phase density at the previous converged time step
phaseEnthalpy	real64_array3d	Phase enthalpy
phaseEnthalpy_n	real64_array3d	Phase enthalpy at the previous converged time step
phaseFraction	real64_array3d	Phase fraction
phaseInternalEnergy	real64_array3d	Phase internal energy
phaseInternalEnergy_n	real64_array3d	Phase internal energy at the previous converged time step
phaseMassDensity	real64_array3d	Phase mass density
phaseViscosity	real64_array3d	Phase viscosity
totalDensity	real64_array2d	Total density
totalDensity_n	real64_array2d	Total density at the previous converged time step
useMass	integer	(no description available)

Datastructure: CarmanKozenyPermeability

Name	Type	Description
dPerm_dPorosity	real64_array3d	(no description available)
dPerm_dPressure	real64_array3d	Derivative of rock permeability with respect to pressure
permeability	real64_array3d	Rock permeability

Datastructure: CellElementRegion

Name	Type	Description
domainBoundaryIndicator	integer_array	(no description available)
ghostRank	integer_array	(no description available)
globalToLocalMap	geosx_mapBase< long long, int, std_integral_constant< bool, false > >	(no description available)
isExternal	integer_array	(no description available)
localToGlobalMap	globalIndex_array	Array that contains a map from localIndex to globalIndex.
elementSubRegions	node	Datastructure: elementSubRegions
neighborData	node	Datastructure: neighborData
sets	node	Datastructure: sets

Datastructure: ChomboIO

Name	Type	Description

Datastructure: CompositeFunction

Name	Type	Description

Datastructure: CompositionalMultiphaseFVM

Name	Type	Description
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: CompositionalMultiphaseFluid

Name	Type	Description
dPhaseCompFraction	LvArray_Array< double, 5, camp_int_seq< long, 0l, 1l, 2l, 3l, 4l >, int, LvArray_ChaiBuffer >	Derivative of phase component fraction with respect to pressure, temperature, and global component fractions
dPhaseDensity	real64_array4d	Derivative of phase density with respect to pressure, temperature, and global component fractions
dPhaseEnthalpy	real64_array4d	Derivative of phase enthalpy with respect to pressure, temperature, and global component fractions
dPhaseFraction	real64_array4d	Derivative of phase fraction with respect to pressure, temperature, and global component fractions
dPhaseInternalEnergy	real64_array4d	Derivative of phase internal energy with respect to pressure, temperature, and global component fractions
dPhaseMassDensity	real64_array4d	Derivative of phase mass density with respect to pressure, temperature, and global component fractions
dPhaseViscosity	real64_array4d	Derivative of phase viscosity with respect to pressure, temperature, and global component fractions
dTotalDensity	real64_array3d	Derivative of total density with respect to pressure, temperature, and global component fractions
initialTotalMassDensity	real64_array2d	Initial total mass density
phaseCompFraction	real64_array4d	Phase component fraction
phaseCompFraction_n	real64_array4d	Phase component fraction at the previous converged time step
phaseDensity	real64_array3d	Phase density
phaseDensity_n	real64_array3d	Phase density at the previous converged time step
phaseEnthalpy	real64_array3d	Phase enthalpy
phaseEnthalpy_n	real64_array3d	Phase enthalpy at the previous converged time step
phaseFraction	real64_array3d	Phase fraction
phaseInternalEnergy	real64_array3d	Phase internal energy
phaseInternalEnergy_n	real64_array3d	Phase internal energy at the previous converged time step
phaseMassDensity	real64_array3d	Phase mass density
phaseViscosity	real64_array3d	Phase viscosity
totalDensity	real64_array2d	Total density
totalDensity_n	real64_array2d	Total density at the previous converged time step
useMass	integer	(no description available)

Datastructure: CompositionalMultiphaseHybridFVM

Name	Type	Registered On	Description
maxStableDt	real64		Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >		MeshBody/Region combinations that the solver will be applied to.
facePressure_n	real64_array	Datastructure: faceManager	Face pressure at the previous converged time step
mimGravityCoefficient	real64_array	Datastructure: faceManager	Mimetic gravity coefficient
LinearSolverParameters	node		Datastructure: LinearSolverParameters
NonlinearSolverParameters	node		Datastructure: NonlinearSolverParameters
SolverStatistics	node		Datastructure: SolverStatistics

Datastructure: CompositionalMultiphaseReservoir

Name	Type	Description
discretization	string	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: CompositionalMultiphaseStatistics

Name	Type	Description

Datastructure: CompositionalMultiphaseWell

Name	Type	Description
discretization	string	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics
WellControls	node	Datastructure: WellControls

Datastructure: CompressibleSinglePhaseFluid

Name	Type	Description
dDensity_dPressure	real64_array2d	Derivative of density with respect to pressure
dDensity_dTemperature	real64_array2d	Derivative of density with respect to temperature
dEnthalpy_dPressure	real64_array2d	Derivative of enthalpy with respect to pressure
dEnthalpy_dTemperature	real64_array2d	Derivative of enthalpy with respect to temperature
dInternalEnergy_dPressure	real64_array2d	Derivative of internal energy with respect to pressure
dInternalEnergy_dTemperature	real64_array2d	Derivative of internal energy with respect to temperature
dViscosity_dPressure	real64_array2d	Derivative of viscosity with respect to pressure
dViscosity_dTemperature	real64_array2d	Derivative of viscosity with respect to temperature
density	real64_array2d	Density
density_n	real64_array2d	Density at the previous converged time step
enthalpy	real64_array2d	Enthalpy
initialDensity	real64_array2d	Initial density
internalEnergy	real64_array2d	Internal energy
internalEnergy_n	real64_array2d	Fluid internal energy at the previous converged step
viscosity	real64_array2d	Viscosity

Datastructure: CompressibleSolidCarmanKozenyPermeability

Name	Type	Description

Datastructure: CompressibleSolidConstantPermeability

Name	Type	Description

Datastructure: CompressibleSolidParallelPlatesPermeability

Name	Type	Description

Datastructure: CompressibleSolidSlipDependentPermeability

Name	Type	Description

Datastructure: ConstantPermeability

Name	Type	Description
dPerm_dPressure	real64_array3d	Derivative of rock permeability with respect to pressure
permeability	real64_array3d	Rock permeability

Datastructure: Constitutive

Name	Type	Description
BiotPorosity	node	Datastructure: BiotPorosity
BlackOilFluid	node	Datastructure: BlackOilFluid
BrooksCoreyBakerRelativePermeability	node	Datastructure: BrooksCoreyBakerRelativePermeability
BrooksCoreyCapillaryPressure	node	Datastructure: BrooksCoreyCapillaryPressure
BrooksCoreyRelativePermeability	node	Datastructure: BrooksCoreyRelativePermeability
CO2BrineEzrokhiFluid	node	Datastructure: CO2BrineEzrokhiFluid
CO2BrineEzrokhiThermalFluid	node	Datastructure: CO2BrineEzrokhiThermalFluid
CO2BrinePhillipsFluid	node	Datastructure: CO2BrinePhillipsFluid
CO2BrinePhillipsThermalFluid	node	Datastructure: CO2BrinePhillipsThermalFluid
CarmanKozenyPermeability	node	Datastructure: CarmanKozenyPermeability
CompositionalMultiphaseFluid	node	Datastructure: CompositionalMultiphaseFluid
CompressibleSinglePhaseFluid	node	Datastructure: CompressibleSinglePhaseFluid
CompressibleSolidCarmanKozenyPermeability	node	Datastructure: CompressibleSolidCarmanKozenyPermeability
CompressibleSolidConstantPermeability	node	Datastructure: CompressibleSolidConstantPermeability
CompressibleSolidParallelPlatesPermeability	node	Datastructure: CompressibleSolidParallelPlatesPermeability
CompressibleSolidSlipDependentPermeability	node	Datastructure: CompressibleSolidSlipDependentPermeability
ConstantPermeability	node	Datastructure: ConstantPermeability
Coulomb	node	Datastructure: Coulomb
DamageElasticIsotropic	node	Datastructure: DamageElasticIsotropic
DamageSpectralElasticIsotropic	node	Datastructure: DamageSpectralElasticIsotropic
DamageVolDevElasticIsotropic	node	Datastructure: DamageVolDevElasticIsotropic
DeadOilFluid	node	Datastructure: DeadOilFluid
DelftEgg	node	Datastructure: DelftEgg
DruckerPrager	node	Datastructure: DruckerPrager
ElasticIsotropic	node	Datastructure: ElasticIsotropic
ElasticIsotropicPressureDependent	node	Datastructure: ElasticIsotropicPressureDependent
ElasticOrthotropic	node	Datastructure: ElasticOrthotropic
ElasticTransverseIsotropic	node	Datastructure: ElasticTransverseIsotropic
ExtendedDruckerPrager	node	Datastructure: ExtendedDruckerPrager
FrictionlessContact	node	Datastructure: FrictionlessContact
JFunctionCapillaryPressure	node	Datastructure: JFunctionCapillaryPressure
ModifiedCamClay	node	Datastructure: ModifiedCamClay
MultiPhaseConstantThermalConductivity	node	Datastructure: MultiPhaseConstantThermalConductivity
MultiPhaseVolumeWeightedThermalConductivity	node	Datastructure: MultiPhaseVolumeWeightedThermalConductivity
NullModel	node	Datastructure: NullModel
ParallelPlatesPermeability	node	Datastructure: ParallelPlatesPermeability
ParticleFluid	node	Datastructure: ParticleFluid
PermeabilityBase	node	Datastructure: PermeabilityBase
PorousDelftEgg	node	Datastructure: PorousDelftEgg
PorousDruckerPrager	node	Datastructure: PorousDruckerPrager
PorousElasticIsotropic	node	Datastructure: PorousElasticIsotropic
PorousElasticOrthotropic	node	Datastructure: PorousElasticOrthotropic
PorousElasticTransverseIsotropic	node	Datastructure: PorousElasticTransverseIsotropic
PorousExtendedDruckerPrager	node	Datastructure: PorousExtendedDruckerPrager
PorousModifiedCamClay	node	Datastructure: PorousModifiedCamClay
PressurePorosity	node	Datastructure: PressurePorosity
ProppantPermeability	node	Datastructure: ProppantPermeability
ProppantPorosity	node	Datastructure: ProppantPorosity
ProppantSlurryFluid	node	Datastructure: ProppantSlurryFluid
ProppantSolidProppantPermeability	node	Datastructure: ProppantSolidProppantPermeability
SinglePhaseConstantThermalConductivity	node	Datastructure: SinglePhaseConstantThermalConductivity
SlipDependentPermeability	node	Datastructure: SlipDependentPermeability
SolidInternalEnergy	node	Datastructure: SolidInternalEnergy
TableCapillaryPressure	node	Datastructure: TableCapillaryPressure
TableRelativePermeability	node	Datastructure: TableRelativePermeability
TableRelativePermeabilityHysteresis	node	Datastructure: TableRelativePermeabilityHysteresis
ThermalCompressibleSinglePhaseFluid	node	Datastructure: ThermalCompressibleSinglePhaseFluid
VanGenuchtenBakerRelativePermeability	node	Datastructure: VanGenuchtenBakerRelativePermeability
VanGenuchtenCapillaryPressure	node	Datastructure: VanGenuchtenCapillaryPressure

Datastructure: ConstitutiveModels

Name	Type	Description

Datastructure: Coulomb

Name	Type	Description
elasticSlip	real64_array2d	Elastic Slip

Datastructure: Cylinder

Name	Type	Description

Datastructure: DamageElasticIsotropic

Name	Type	Description
bulkModulus	real64_array	Elastic Bulk Modulus Field
damage	real64_array2d	Material Damage Variable
density	real64_array2d	Material Density
extDrivingForce	real64_array2d	External Driving Force
oldStress	real64_array3d	Previous Material Stress
shearModulus	real64_array	Elastic Shear Modulus Field
strainEnergyDensity	real64_array2d	Strain Energy Density
stress	real64_array3d	Current Material Stress

Datastructure: DamageSpectralElasticIsotropic

Name	Type	Description
bulkModulus	real64_array	Elastic Bulk Modulus Field
damage	real64_array2d	Material Damage Variable
density	real64_array2d	Material Density
extDrivingForce	real64_array2d	External Driving Force
oldStress	real64_array3d	Previous Material Stress
shearModulus	real64_array	Elastic Shear Modulus Field
strainEnergyDensity	real64_array2d	Strain Energy Density
stress	real64_array3d	Current Material Stress

Datastructure: DamageVolDevElasticIsotropic

Name	Type	Description
bulkModulus	real64_array	Elastic Bulk Modulus Field
damage	real64_array2d	Material Damage Variable
density	real64_array2d	Material Density
extDrivingForce	real64_array2d	External Driving Force
oldStress	real64_array3d	Previous Material Stress
shearModulus	real64_array	Elastic Shear Modulus Field
strainEnergyDensity	real64_array2d	Strain Energy Density
stress	real64_array3d	Current Material Stress

Datastructure: DeadOilFluid

Name	Type	Description
dPhaseCompFraction	LvArray_Array< double, 5, camp_int_seq< long, 0l, 1l, 2l, 3l, 4l >, int, LvArray_ChaiBuffer >	Derivative of phase component fraction with respect to pressure, temperature, and global component fractions
dPhaseDensity	real64_array4d	Derivative of phase density with respect to pressure, temperature, and global component fractions
dPhaseEnthalpy	real64_array4d	Derivative of phase enthalpy with respect to pressure, temperature, and global component fractions
dPhaseFraction	real64_array4d	Derivative of phase fraction with respect to pressure, temperature, and global component fractions
dPhaseInternalEnergy	real64_array4d	Derivative of phase internal energy with respect to pressure, temperature, and global component fractions
dPhaseMassDensity	real64_array4d	Derivative of phase mass density with respect to pressure, temperature, and global component fractions
dPhaseViscosity	real64_array4d	Derivative of phase viscosity with respect to pressure, temperature, and global component fractions
dTotalDensity	real64_array3d	Derivative of total density with respect to pressure, temperature, and global component fractions
formationVolFactorTableWrappers	LvArray_Array< geosx_TableFunction_KernelWrapper, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >	(no description available)
hydrocarbonPhaseOrder	integer_array	(no description available)
initialTotalMassDensity	real64_array2d	Initial total mass density
phaseCompFraction	real64_array4d	Phase component fraction
phaseCompFraction_n	real64_array4d	Phase component fraction at the previous converged time step
phaseDensity	real64_array3d	Phase density
phaseDensity_n	real64_array3d	Phase density at the previous converged time step
phaseEnthalpy	real64_array3d	Phase enthalpy
phaseEnthalpy_n	real64_array3d	Phase enthalpy at the previous converged time step
phaseFraction	real64_array3d	Phase fraction
phaseInternalEnergy	real64_array3d	Phase internal energy
phaseInternalEnergy_n	real64_array3d	Phase internal energy at the previous converged time step
phaseMassDensity	real64_array3d	Phase mass density
phaseOrder	integer_array	(no description available)
phaseTypes	integer_array	(no description available)
phaseViscosity	real64_array3d	Phase viscosity
totalDensity	real64_array2d	Total density
totalDensity_n	real64_array2d	Total density at the previous converged time step
useMass	integer	(no description available)
viscosityTableWrappers	LvArray_Array< geosx_TableFunction_KernelWrapper, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >	(no description available)

Datastructure: DelftEgg

Name	Type	Description
bulkModulus	real64_array	Elastic Bulk Modulus Field
cslSlope	real64_array	Slope of the critical state line
density	real64_array2d	Material Density
oldPreConsolidationPressure	real64_array2d	Old preconsolidation pressure
oldStress	real64_array3d	Previous Material Stress
preConsolidationPressure	real64_array2d	New preconsolidation pressure
recompressionIndex	real64_array	Recompression index
shapeParameter	real64_array	Shape parameter for the yield surface
shearModulus	real64_array	Elastic Shear Modulus Field
stress	real64_array3d	Current Material Stress
virginCompressionIndex	real64_array	Virgin compression index

Datastructure: Dirichlet

Name	Type	Description

Datastructure: DruckerPrager

Name	Type	Description
bulkModulus	real64_array	Elastic Bulk Modulus Field
cohesion	real64_array2d	New cohesion state
density	real64_array2d	Material Density
dilation	real64_array	Plastic potential slope
friction	real64_array	Yield surface slope
hardening	real64_array	Hardening rate
oldCohesion	real64_array2d	Old cohesion state
oldStress	real64_array3d	Previous Material Stress
shearModulus	real64_array	Elastic Shear Modulus Field
stress	real64_array3d	Current Material Stress

Datastructure: ElasticIsotropic

Name	Type	Description
bulkModulus	real64_array	Elastic Bulk Modulus Field
density	real64_array2d	Material Density
oldStress	real64_array3d	Previous Material Stress
shearModulus	real64_array	Elastic Shear Modulus Field
stress	real64_array3d	Current Material Stress

Datastructure: ElasticIsotropicPressureDependent

Name	Type	Description
density	real64_array2d	Material Density
oldStress	real64_array3d	Previous Material Stress
recompressionIndex	real64_array	Recompression Index Field
refPressure	real64	Reference Pressure Field
refStrainVol	real64	Reference Volumetric Strain
shearModulus	real64_array	Elastic Shear Modulus
stress	real64_array3d	Current Material Stress

Datastructure: ElasticOrthotropic

Name	Type	Description
c11	real64_array	Elastic Stiffness Field C11
c12	real64_array	Elastic Stiffness Field C12
c13	real64_array	Elastic Stiffness Field C13
c22	real64_array	Elastic Stiffness Field C22
c23	real64_array	Elastic Stiffness Field C23
c33	real64_array	Elastic Stiffness Field C33
c44	real64_array	Elastic Stiffness Field C44
c55	real64_array	Elastic Stiffness Field C55
c66	real64_array	Elastic Stiffness Field C66
density	real64_array2d	Material Density
oldStress	real64_array3d	Previous Material Stress
stress	real64_array3d	Current Material Stress

Datastructure: ElasticSEM

Name	Type	Description
displacementXNp1AtReceivers	real32_array2d	Displacement value at each receiver for each timestep (x-component)
displacementYNp1AtReceivers	real32_array2d	Displacement value at each receiver for each timestep (y-component)
displacementZNp1AtReceivers	real32_array2d	Displacement value at each receiver for each timestep (z-component)
indexSeismoTrace	integer	Count for output pressure at receivers
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
receiverIsLocal	integer_array	Flag that indicates whether the receiver is local to this MPI rank
receiverNodeIds	integer_array2d	Indices of the nodes (in the right order) for each receiver point
sourceConstants	real64_array2d	Constant part of the receiver for the nodes listed in m_receiverNodeIds
sourceIsAccessible	integer_array	Flag that indicates whether the source is accessible to this MPI rank
sourceNodeIds	integer_array2d	Indices of the nodes (in the right order) for each source point
sourceValue	real32_array2d	Source Value of the sources
usePML	integer	Flag to apply PML
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: ElasticTransverseIsotropic

Name	Type	Description
c11	real64_array	Elastic Stiffness Field C11
c13	real64_array	Elastic Stiffness Field C13
c33	real64_array	Elastic Stiffness Field C33
c44	real64_array	Elastic Stiffness Field C44
c66	real64_array	Elastic Stiffness Field C66
density	real64_array2d	Material Density
oldStress	real64_array3d	Previous Material Stress
stress	real64_array3d	Current Material Stress

Datastructure: ElementRegions

Name	Type	Description
domainBoundaryIndicator	integer_array	(no description available)
ghostRank	integer_array	(no description available)
globalToLocalMap	geosx_mapBase< long long, int, std_integral_constant< bool, false > >	(no description available)
isExternal	integer_array	(no description available)
localToGlobalMap	globalIndex_array	Array that contains a map from localIndex to globalIndex.
CellElementRegion	node	Datastructure: CellElementRegion
SurfaceElementRegion	node	Datastructure: SurfaceElementRegion
WellElementRegion	node	Datastructure: WellElementRegion
elementRegionsGroup	node	Datastructure: elementRegionsGroup
neighborData	node	Datastructure: neighborData
sets	node	Datastructure: sets

Datastructure: EmbeddedSurfaceGenerator

Name	Type	Registered On	Description
maxStableDt	real64		Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >		MeshBody/Region combinations that the solver will be applied to.
parentEdgeIndex	integer_array	Datastructure: embeddedSurfacesNodeManager	Index of parent edge within the mesh object it is registered on.
LinearSolverParameters	node		Datastructure: LinearSolverParameters
NonlinearSolverParameters	node		Datastructure: NonlinearSolverParameters
SolverStatistics	node		Datastructure: SolverStatistics

Datastructure: Events

Name	Type	Description
currentSubEvent	integer	Index of the current subevent.
cycle	integer	Current simulation cycle number.
dt	real64	Current simulation timestep.
time	real64	Current simulation time.
HaltEvent	node	Datastructure: HaltEvent
PeriodicEvent	node	Datastructure: PeriodicEvent
SoloEvent	node	Datastructure: SoloEvent

Datastructure: ExtendedDruckerPrager

Name	Type	Description
bulkModulus	real64_array	Elastic Bulk Modulus Field
density	real64_array2d	Material Density
dilationRatio	real64_array	Plastic potential slope ratio
hardening	real64_array	Hardening parameter
initialFriction	real64_array	Initial yield surface slope
oldStateVariable	real64_array2d	Old equivalent plastic shear strain
oldStress	real64_array3d	Previous Material Stress
pressureIntercept	real64_array	Pressure point at cone vertex
residualFriction	real64_array	Residual yield surface slope
shearModulus	real64_array	Elastic Shear Modulus Field
stateVariable	real64_array2d	New equivalent plastic shear strain
stress	real64_array3d	Current Material Stress

Datastructure: FieldSpecification

Name	Type	Description

Datastructure: FieldSpecifications

Name	Type	Description
Aquifer	node	Datastructure: Aquifer
Dirichlet	node	Datastructure: Dirichlet
FieldSpecification	node	Datastructure: FieldSpecification
HydrostaticEquilibrium	node	Datastructure: HydrostaticEquilibrium
PML	node	Datastructure: PML
SourceFlux	node	Datastructure: SourceFlux
Traction	node	Datastructure: Traction

Datastructure: File

Name	Type	Description

Datastructure: FiniteElementSpace

Name	Type	Description

Datastructure: FiniteElements

Name	Type	Description
FiniteElementSpace	node	Datastructure: FiniteElementSpace
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters

Datastructure: FiniteVolume

Name	Type	Description
HybridMimeticDiscretization	node	Datastructure: HybridMimeticDiscretization
TwoPointFluxApproximation	node	Datastructure: TwoPointFluxApproximation

Datastructure: FlowProppantTransport

Name	Type	Description
discretization	string	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: FrictionlessContact

Name	Type	Description

Datastructure: Functions

Name	Type	Description
CompositeFunction	node	Datastructure: CompositeFunction
MultivariableTableFunction	node	Datastructure: MultivariableTableFunction
SymbolicFunction	node	Datastructure: SymbolicFunction
TableFunction	node	Datastructure: TableFunction

Datastructure: Geometry

Name	Type	Description
BoundedPlane	node	Datastructure: BoundedPlane
Box	node	Datastructure: Box
Cylinder	node	Datastructure: Cylinder
ThickPlane	node	Datastructure: ThickPlane

Datastructure: HaltEvent

Name	Type	Description
currentSubEvent	integer	Index of the current subevent
eventForecast	integer	Indicates when the event is expected to execute
isTargetExecuting	integer	Index of the current subevent
lastCycle	integer	Last event occurrence (cycle)
lastTime	real64	Last event occurrence (time)
HaltEvent	node	Datastructure: HaltEvent
PeriodicEvent	node	Datastructure: PeriodicEvent
SoloEvent	node	Datastructure: SoloEvent

Datastructure: HybridMimeticDiscretization

Name	Type	Description

Datastructure: Hydrofracture

Name	Type	Description
discretization	string	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: HydrostaticEquilibrium

Name	Type	Description
component	integer	Component of field (if tensor) to apply boundary condition to.
fieldName	string	Name of field that boundary condition is applied to.
initialCondition	integer	Boundary condition is applied as an initial condition.
setNames	string_array	Name of sets that boundary condition is applied to.

Datastructure: Included

Name	Type	Description
File	node	Datastructure: File

Datastructure: InternalMesh

Name	Type	Description
meshLevels	node	Datastructure: meshLevels

Datastructure: InternalWell

Name	Type	Description
Perforation	node	Datastructure: Perforation

Datastructure: InternalWellbore

Name	Type	Description
nx	integer_array	Number of elements in the x-direction within each mesh block
ny	integer_array	Number of elements in the y-direction within each mesh block
xCoords	real64_array	x-coordinates of each mesh block vertex
yCoords	real64_array	y-coordinates of each mesh block vertex
meshLevels	node	Datastructure: meshLevels

Datastructure: JFunctionCapillaryPressure

Name	Type	Description
dPhaseCapPressure_dPhaseVolFraction	real64_array4d	Derivative of phase capillary pressure with respect to phase volume fraction
jFuncMultiplier	real64_array2d	Multiplier for the Leverett J-function
jFunctionWrappers	LvArray_Array< geosx_TableFunction_KernelWrapper, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >	(no description available)
phaseCapPressure	real64_array3d	Phase capillary pressure
phaseOrder	integer_array	(no description available)
phaseTypes	integer_array	(no description available)

Datastructure: LagrangianContact

Name	Type	Description
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: LaplaceFEM

Name	Type	Description
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: Level0

Name	Type	Description
meshLevel	integer	(no description available)
ElementRegions	node	Datastructure: ElementRegions
edgeManager	node	Datastructure: edgeManager
embeddedSurfacesEdgeManager	node	Datastructure: embeddedSurfacesEdgeManager
embeddedSurfacesNodeManager	node	Datastructure: embeddedSurfacesNodeManager
faceManager	node	Datastructure: faceManager
nodeManager	node	Datastructure: nodeManager

Datastructure: LinearSolverParameters

Name	Type	Description

Datastructure: Mesh

Name	Type	Description
InternalMesh	node	Datastructure: InternalMesh
InternalWell	node	Datastructure: InternalWell
InternalWellbore	node	Datastructure: InternalWellbore
PAMELAMesh	node	Datastructure: PAMELAMesh
VTKMesh	node	Datastructure: VTKMesh

Datastructure: MeshBodies

Name	Type	Description
InternalMesh	node	Datastructure: InternalMesh
InternalWellbore	node	Datastructure: InternalWellbore
PAMELAMesh	node	Datastructure: PAMELAMesh
VTKMesh	node	Datastructure: VTKMesh

Datastructure: ModifiedCamClay

Name	Type	Description
cslSlope	real64_array	Slope of the critical state line
density	real64_array2d	Material Density
oldPreConsolidationPressure	real64_array2d	Old preconsolidation pressure
oldStress	real64_array3d	Previous Material Stress
preConsolidationPressure	real64_array2d	New preconsolidation pressure
recompressionIndex	real64_array	Recompression Index Field
refPressure	real64	Reference Pressure Field
refStrainVol	real64	Reference Volumetric Strain
shearModulus	real64_array	Elastic Shear Modulus
stress	real64_array3d	Current Material Stress
virginCompressionIndex	real64_array	Virgin compression index

Datastructure: MultiPhaseConstantThermalConductivity

Name	Type	Description
dEffectiveConductivity_dPhaseVolFraction	real64_array4d	Derivative of effective conductivity with respect to phase volume fraction
effectiveConductivity	real64_array3d	Effective conductivity

Datastructure: MultiPhaseVolumeWeightedThermalConductivity

Name	Type	Description
dEffectiveConductivity_dPhaseVolFraction	real64_array4d	Derivative of effective conductivity with respect to phase volume fraction
effectiveConductivity	real64_array3d	Effective conductivity
rockThermalConductivity	real64_array3d	Rock thermal conductivity

Datastructure: MultiphasePoromechanics

Name	Type	Description
discretization	string	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: MultiphasePoromechanicsReservoir

Name	Type	Description
discretization	string	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: MultivariableTableFunction

Name	Type	Description

Datastructure: NonlinearSolverParameters

Name	Type	Description
newtonNumberOfIterations	integer	Number of Newton’s iterations.

Datastructure: NullModel

Name	Type	Description

Datastructure: NumericalMethods

Name	Type	Description
FiniteElements	node	Datastructure: FiniteElements
FiniteVolume	node	Datastructure: FiniteVolume

Datastructure: Outputs

Name	Type	Description
Blueprint	node	Datastructure: Blueprint
ChomboIO	node	Datastructure: ChomboIO
Python	node	Datastructure: Python
Restart	node	Datastructure: Restart
Silo	node	Datastructure: Silo
TimeHistory	node	Datastructure: TimeHistory
VTK	node	Datastructure: VTK

Datastructure: PAMELAMesh

Name	Type	Description
meshLevels	node	Datastructure: meshLevels

Datastructure: PML

Name	Type	Description
fieldName	string	Name of field that boundary condition is applied to.
initialCondition	integer	Boundary condition is applied as an initial condition.

Datastructure: PVTDriver

Name	Type	Description

Datastructure: PackCollection

Name	Type	Description

Datastructure: ParallelPlatesPermeability

Name	Type	Description
dPerm_dDispJump	real64_array4d	Derivative of rock permeability with respect to displacement jump
dPerm_dPressure	real64_array3d	Derivative of rock permeability with respect to pressure
permeability	real64_array3d	Rock permeability

Datastructure: Parameter

Name	Type	Description

Datastructure: Parameters

Name	Type	Description
Parameter	node	Datastructure: Parameter

Datastructure: ParticleFluid

Name	Type	Description
collisionFactor	real64_array	Collision factor
dCollisionFactor_dProppantConcentration	real64_array	Derivative of collision factor with respect to proppant concentration
dSettlingFactor_dComponentConcentration	real64_array2d	Derivative of settling factor with respect to component concentration
dSettlingFactor_dPressure	real64_array	Derivative of settling factor with respect to pressure
dSettlingFactor_dProppantConcentration	real64_array	Derivative of settling factor with respect to proppant concentration
proppantPackPermeability	real64_array	Proppant pack permeability
settlingFactor	real64_array	Settling factor

Datastructure: Perforation

Name	Type	Description

Datastructure: PeriodicEvent

Name	Type	Description
currentSubEvent	integer	Index of the current subevent
eventForecast	integer	Indicates when the event is expected to execute
isTargetExecuting	integer	Index of the current subevent
lastCycle	integer	Last event occurrence (cycle)
lastTime	real64	Last event occurrence (time)
HaltEvent	node	Datastructure: HaltEvent
PeriodicEvent	node	Datastructure: PeriodicEvent
SoloEvent	node	Datastructure: SoloEvent

Datastructure: PermeabilityBase

Name	Type	Description
dPerm_dPressure	real64_array3d	Derivative of rock permeability with respect to pressure
permeability	real64_array3d	Rock permeability

Datastructure: PhaseFieldDamageFEM

Name	Type	Description
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: PhaseFieldFracture

Name	Type	Description
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: PorousDelftEgg

Name	Type	Description

Datastructure: PorousDruckerPrager

Name	Type	Description

Datastructure: PorousElasticIsotropic

Name	Type	Description

Datastructure: PorousElasticOrthotropic

Name	Type	Description

Datastructure: PorousElasticTransverseIsotropic

Name	Type	Description

Datastructure: PorousExtendedDruckerPrager

Name	Type	Description

Datastructure: PorousModifiedCamClay

Name	Type	Description

Datastructure: PressurePorosity

Name	Type	Description
dPorosity_dPressure	real64_array2d	Derivative of rock porosity with respect to pressure
initialPorosity	real64_array2d	Initial porosity
porosity	real64_array2d	Rock porosity
porosity_n	real64_array2d	Rock porosity at the previous converged time step
referencePorosity	real64_array	Reference porosity

Datastructure: Problem

Name	Type	Description
Benchmarks	node	Datastructure: Benchmarks
Constitutive	node	Datastructure: Constitutive
ElementRegions	node	Datastructure: ElementRegions
Events	node	Datastructure: Events
FieldSpecifications	node	Datastructure: FieldSpecifications
Functions	node	Datastructure: Functions
Geometry	node	Datastructure: Geometry
Included	node	Datastructure: Included
Mesh	node	Datastructure: Mesh
NumericalMethods	node	Datastructure: NumericalMethods
Outputs	node	Datastructure: Outputs
Parameters	node	Datastructure: Parameters
Solvers	node	Datastructure: Solvers
Tasks	node	Datastructure: Tasks
commandLine	node	Datastructure: commandLine
domain	node	Datastructure: domain

Datastructure: ProppantPermeability

Name	Type	Description
dPerm_dDispJump	real64_array4d	Derivative of rock permeability with respect to displacement jump
dPerm_dPressure	real64_array3d	Derivative of rock permeability with respect to pressure
permeability	real64_array3d	Rock permeability
permeabilityMultiplier	real64_array3d	Rock permeability multiplier
proppantPackPermeability	real64	(no description available)

Datastructure: ProppantPorosity

Name	Type	Description
dPorosity_dPressure	real64_array2d	Derivative of rock porosity with respect to pressure
initialPorosity	real64_array2d	Initial porosity
porosity	real64_array2d	Rock porosity
porosity_n	real64_array2d	Rock porosity at the previous converged time step
referencePorosity	real64_array	Reference porosity

Datastructure: ProppantSlurryFluid

Name	Type	Description
FluidDensity	real64_array2d	Fluid density
FluidViscosity	real64_array2d	Fluid viscosity
componentDensity	real64_array3d	Component density
dCompDens_dCompConc	real64_array4d	Derivative of component density with respect to component concentration
dCompDens_dPres	real64_array3d	Derivative of component density with respect to pressure
dDens_dCompConc	real64_array3d	Derivative of density with respect to component concentration
dDens_dProppantConc	real64_array2d	Derivative of density with respect to proppant concentration
dDensity_dPressure	real64_array2d	Derivative of density with respect to pressure
dDensity_dTemperature	real64_array2d	Derivative of density with respect to temperature
dEnthalpy_dPressure	real64_array2d	Derivative of enthalpy with respect to pressure
dEnthalpy_dTemperature	real64_array2d	Derivative of enthalpy with respect to temperature
dFluidDens_dCompConc	real64_array3d	Derivative of fluid density with respect to component concentration
dFluidDens_dPres	real64_array2d	Derivative of fluid density with respect to pressure
dFluidVisc_dCompConc	real64_array3d	Derivative of fluid viscosity with respect to component concentration
dFluidVisc_dPres	real64_array2d	Derivative of fluid viscosity with respect to pressure
dInternalEnergy_dPressure	real64_array2d	Derivative of internal energy with respect to pressure
dInternalEnergy_dTemperature	real64_array2d	Derivative of internal energy with respect to temperature
dVisc_dCompConc	real64_array3d	Derivative of viscosity with respect to component concentration
dVisc_dProppantConc	real64_array2d	Derivative of viscosity with respect to proppant concentration
dViscosity_dPressure	real64_array2d	Derivative of viscosity with respect to pressure
dViscosity_dTemperature	real64_array2d	Derivative of viscosity with respect to temperature
density	real64_array2d	Density
density_n	real64_array2d	Density at the previous converged time step
enthalpy	real64_array2d	Enthalpy
initialDensity	real64_array2d	Initial density
internalEnergy	real64_array2d	Internal energy
internalEnergy_n	real64_array2d	Fluid internal energy at the previous converged step
viscosity	real64_array2d	Viscosity

Datastructure: ProppantSolidProppantPermeability

Name	Type	Description

Datastructure: ProppantTransport

Name	Type	Description
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: Python

Name	Type	Description

Datastructure: ReactiveCompositionalMultiphaseOBL

Name	Type	Description
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: Restart

Name	Type	Description

Datastructure: Run

Name	Type	Description

Datastructure: Silo

Name	Type	Description

Datastructure: SinglePhaseConstantThermalConductivity

Name	Type	Description
effectiveConductivity	real64_array3d	Effective conductivity

Datastructure: SinglePhaseFVM

Name	Type	Description
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: SinglePhaseHybridFVM

Name	Type	Registered On	Description
maxStableDt	real64		Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >		MeshBody/Region combinations that the solver will be applied to.
facePressure_n	real64_array	Datastructure: faceManager	Face pressure at the previous converged time step
LinearSolverParameters	node		Datastructure: LinearSolverParameters
NonlinearSolverParameters	node		Datastructure: NonlinearSolverParameters
SolverStatistics	node		Datastructure: SolverStatistics

Datastructure: SinglePhasePoromechanics

Name	Type	Description
discretization	string	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: SinglePhasePoromechanicsEmbeddedFractures

Name	Type	Description
discretization	string	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: SinglePhasePoromechanicsReservoir

Name	Type	Description
discretization	string	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: SinglePhaseProppantFVM

Name	Type	Description
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: SinglePhaseReservoir

Name	Type	Description
discretization	string	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: SinglePhaseStatistics

Name	Type	Description

Datastructure: SinglePhaseWell

Name	Type	Description
discretization	string	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics
WellControls	node	Datastructure: WellControls

Datastructure: SlipDependentPermeability

Name	Type	Description
dPerm_dDispJump	real64_array4d	Derivative of the permeability w.r.t. the displacement jump.
dPerm_dPressure	real64_array3d	Derivative of rock permeability with respect to pressure
permeability	real64_array3d	Rock permeability

Datastructure: SolidInternalEnergy

Name	Type	Description
dInternalEnergy_dTemperature	real64_array2d	Derivative of the solid internal energy w.r.t. temperature [J/(m^3.K)]
internalEnergy	real64_array2d	Internal energy of the solid per unit volume [J/m^3]
internalEnergy_n	real64_array2d	Internal energy of the solid per unit volume at the previous time-step [J/m^3]

Datastructure: SolidMechanicsEmbeddedFractures

Name	Type	Description
discretization	string	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: SolidMechanicsLagrangianSSLE

Name	Type	Description
maxForce	real64	The maximum force contribution in the problem domain.
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: SolidMechanicsStateReset

Name	Type	Description

Datastructure: SolidMechanicsStatistics

Name	Type	Description

Datastructure: SolidMechanics_LagrangianFEM

Name	Type	Description
maxForce	real64	The maximum force contribution in the problem domain.
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: SoloEvent

Name	Type	Description
currentSubEvent	integer	Index of the current subevent
eventForecast	integer	Indicates when the event is expected to execute
isTargetExecuting	integer	Index of the current subevent
lastCycle	integer	Last event occurrence (cycle)
lastTime	real64	Last event occurrence (time)
HaltEvent	node	Datastructure: HaltEvent
PeriodicEvent	node	Datastructure: PeriodicEvent
SoloEvent	node	Datastructure: SoloEvent

Datastructure: SolverStatistics

Name	Type	Description
numDiscardedLinearIterations	integer	Cumulative number of discarded linear iterations
numDiscardedNonlinearIterations	integer	Cumulative number of discarded nonlinear iterations
numDiscardedOuterLoopIterations	integer	Cumulative number of discarded outer loop iterations
numSuccessfulLinearIterations	integer	Cumulative number of successful linear iterations
numSuccessfulNonlinearIterations	integer	Cumulative number of successful nonlinear iterations
numSuccessfulOuterLoopIterations	integer	Cumulative number of successful outer loop iterations
numTimeStepCuts	integer	Number of time step cuts
numTimeSteps	integer	Number of time steps

Datastructure: Solvers

Name	Type	Description
AcousticSEM	node	Datastructure: AcousticSEM
CompositionalMultiphaseFVM	node	Datastructure: CompositionalMultiphaseFVM
CompositionalMultiphaseHybridFVM	node	Datastructure: CompositionalMultiphaseHybridFVM
CompositionalMultiphaseReservoir	node	Datastructure: CompositionalMultiphaseReservoir
CompositionalMultiphaseWell	node	Datastructure: CompositionalMultiphaseWell
ElasticSEM	node	Datastructure: ElasticSEM
EmbeddedSurfaceGenerator	node	Datastructure: EmbeddedSurfaceGenerator
FlowProppantTransport	node	Datastructure: FlowProppantTransport
Hydrofracture	node	Datastructure: Hydrofracture
LagrangianContact	node	Datastructure: LagrangianContact
LaplaceFEM	node	Datastructure: LaplaceFEM
MultiphasePoromechanics	node	Datastructure: MultiphasePoromechanics
MultiphasePoromechanicsReservoir	node	Datastructure: MultiphasePoromechanicsReservoir
PhaseFieldDamageFEM	node	Datastructure: PhaseFieldDamageFEM
PhaseFieldFracture	node	Datastructure: PhaseFieldFracture
ProppantTransport	node	Datastructure: ProppantTransport
ReactiveCompositionalMultiphaseOBL	node	Datastructure: ReactiveCompositionalMultiphaseOBL
SinglePhaseFVM	node	Datastructure: SinglePhaseFVM
SinglePhaseHybridFVM	node	Datastructure: SinglePhaseHybridFVM
SinglePhasePoromechanics	node	Datastructure: SinglePhasePoromechanics
SinglePhasePoromechanicsEmbeddedFractures	node	Datastructure: SinglePhasePoromechanicsEmbeddedFractures
SinglePhasePoromechanicsReservoir	node	Datastructure: SinglePhasePoromechanicsReservoir
SinglePhaseProppantFVM	node	Datastructure: SinglePhaseProppantFVM
SinglePhaseReservoir	node	Datastructure: SinglePhaseReservoir
SinglePhaseWell	node	Datastructure: SinglePhaseWell
SolidMechanicsEmbeddedFractures	node	Datastructure: SolidMechanicsEmbeddedFractures
SolidMechanicsLagrangianSSLE	node	Datastructure: SolidMechanicsLagrangianSSLE
SolidMechanics_LagrangianFEM	node	Datastructure: SolidMechanics_LagrangianFEM
SurfaceGenerator	node	Datastructure: SurfaceGenerator

Datastructure: SourceFlux

Name	Type	Description

Datastructure: SurfaceElementRegion

Name	Type	Description
domainBoundaryIndicator	integer_array	(no description available)
ghostRank	integer_array	(no description available)
globalToLocalMap	geosx_mapBase< long long, int, std_integral_constant< bool, false > >	(no description available)
isExternal	integer_array	(no description available)
localToGlobalMap	globalIndex_array	Array that contains a map from localIndex to globalIndex.
elementSubRegions	node	Datastructure: elementSubRegions
neighborData	node	Datastructure: neighborData
sets	node	Datastructure: sets

Datastructure: SurfaceGenerator

Name	Type	Description
discretization	string	Name of discretization object (defined in the Numerical Methods) to use for this solver. For instance, if this is a Finite Element Solver, the name of a Finite Element Discretization should be specified. If this is a Finite Volume Method, the name of a Finite Volume Discretization discretization should be specified.
failCriterion	integer	(no description available)
maxStableDt	real64	Value of the Maximum Stable Timestep for this solver.
meshTargets	geosx_mapBase< std_pair< string, string >, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	MeshBody/Region combinations that the solver will be applied to.
tipEdges	LvArray_SortedArray< int, int, LvArray_ChaiBuffer >	Set containing all the tip edges
tipFaces	LvArray_SortedArray< int, int, LvArray_ChaiBuffer >	Set containing all the tip faces
tipNodes	LvArray_SortedArray< int, int, LvArray_ChaiBuffer >	Set containing all the nodes at the fracture tip
trailingFaces	LvArray_SortedArray< int, int, LvArray_ChaiBuffer >	Set containing all the trailing faces
LinearSolverParameters	node	Datastructure: LinearSolverParameters
NonlinearSolverParameters	node	Datastructure: NonlinearSolverParameters
SolverStatistics	node	Datastructure: SolverStatistics

Datastructure: SymbolicFunction

Name	Type	Description

Datastructure: TableCapillaryPressure

Name	Type	Description
capPresWrappers	LvArray_Array< geosx_TableFunction_KernelWrapper, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >	(no description available)
dPhaseCapPressure_dPhaseVolFraction	real64_array4d	Derivative of phase capillary pressure with respect to phase volume fraction
phaseCapPressure	real64_array3d	Phase capillary pressure
phaseOrder	integer_array	(no description available)
phaseTypes	integer_array	(no description available)

Datastructure: TableFunction

Name	Type	Description

Datastructure: TableRelativePermeability

Name	Type	Description
dPhaseRelPerm_dPhaseVolFraction	real64_array4d	Derivative of phase relative permeability with respect to phase volume fraction
phaseMinVolumeFraction	real64_array	(no description available)
phaseOrder	integer_array	(no description available)
phaseRelPerm	real64_array3d	Phase relative permeability
phaseTrappedVolFraction	real64_array3d	Phase trapped volume fraction
phaseTypes	integer_array	(no description available)
relPermWrappers	LvArray_Array< geosx_TableFunction_KernelWrapper, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >	(no description available)

Datastructure: TableRelativePermeabilityHysteresis

Name	Type	Description
dPhaseRelPerm_dPhaseVolFraction	real64_array4d	Derivative of phase relative permeability with respect to phase volume fraction
drainagePhaseMaxVolumeFraction	real64_array	(no description available)
drainagePhaseMinVolumeFraction	real64_array	(no description available)
drainagePhaseRelPermEndPoint	real64_array	(no description available)
drainageRelPermWrappers	LvArray_Array< geosx_TableFunction_KernelWrapper, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >	(no description available)
imbibitionPhaseMaxVolumeFraction	real64_array	(no description available)
imbibitionPhaseMinVolumeFraction	real64_array	(no description available)
imbibitionPhaseRelPermEndPoint	real64_array	(no description available)
imbibitionRelPermWrappers	LvArray_Array< geosx_TableFunction_KernelWrapper, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >	(no description available)
landParameter	real64_array	(no description available)
phaseHasHysteresis	integer_array	(no description available)
phaseMaxHistoricalVolFraction	real64_array2d	Phase max historical phase volume fraction
phaseMinHistoricalVolFraction	real64_array2d	Phase min historical phase volume fraction
phaseOrder	integer_array	(no description available)
phaseRelPerm	real64_array3d	Phase relative permeability
phaseTrappedVolFraction	real64_array3d	Phase trapped volume fraction
phaseTypes	integer_array	(no description available)

Datastructure: Tasks

Name	Type	Description
CompositionalMultiphaseStatistics	node	Datastructure: CompositionalMultiphaseStatistics
PVTDriver	node	Datastructure: PVTDriver
PackCollection	node	Datastructure: PackCollection
SinglePhaseStatistics	node	Datastructure: SinglePhaseStatistics
SolidMechanicsStateReset	node	Datastructure: SolidMechanicsStateReset
SolidMechanicsStatistics	node	Datastructure: SolidMechanicsStatistics
TriaxialDriver	node	Datastructure: TriaxialDriver

Datastructure: ThermalCompressibleSinglePhaseFluid

Name	Type	Description
dDensity_dPressure	real64_array2d	Derivative of density with respect to pressure
dDensity_dTemperature	real64_array2d	Derivative of density with respect to temperature
dEnthalpy_dPressure	real64_array2d	Derivative of enthalpy with respect to pressure
dEnthalpy_dTemperature	real64_array2d	Derivative of enthalpy with respect to temperature
dInternalEnergy_dPressure	real64_array2d	Derivative of internal energy with respect to pressure
dInternalEnergy_dTemperature	real64_array2d	Derivative of internal energy with respect to temperature
dViscosity_dPressure	real64_array2d	Derivative of viscosity with respect to pressure
dViscosity_dTemperature	real64_array2d	Derivative of viscosity with respect to temperature
density	real64_array2d	Density
density_n	real64_array2d	Density at the previous converged time step
enthalpy	real64_array2d	Enthalpy
initialDensity	real64_array2d	Initial density
internalEnergy	real64_array2d	Internal energy
internalEnergy_n	real64_array2d	Fluid internal energy at the previous converged step
viscosity	real64_array2d	Viscosity

Datastructure: ThickPlane

Name	Type	Description

Datastructure: TimeHistory

Name	Type	Description
restart	integer	The current history record to be written, on restart from an earlier time allows use to remove invalid future history.

Datastructure: Traction

Name	Type	Description
component	integer	Component of field (if tensor) to apply boundary condition to.
fieldName	string	Name of field that boundary condition is applied to.

Datastructure: TriaxialDriver

Name	Type	Description

Datastructure: TwoPointFluxApproximation

Name	Type	Description
cellStencil	geosx_CellElementStencilTPFA	(no description available)
coefficientName	string	Name of coefficient field
edfmStencil	geosx_EmbeddedSurfaceToCellStencil	(no description available)
faceElementToCellStencil	geosx_FaceElementToCellStencil	(no description available)
fieldName	string	Name of primary solution field
fractureStencil	geosx_SurfaceElementStencil	(no description available)
targetRegions	geosx_mapBase< string, LvArray_Array< string, 1, camp_int_seq< long, 0l >, int, LvArray_ChaiBuffer >, std_integral_constant< bool, true > >	List of regions to build the stencil for

Datastructure: VTK

Name	Type	Description

Datastructure: VTKMesh

Name	Type	Description
meshLevels	node	Datastructure: meshLevels

Datastructure: VanGenuchtenBakerRelativePermeability

Name	Type	Description
dPhaseRelPerm_dPhaseVolFraction	real64_array4d	Derivative of phase relative permeability with respect to phase volume fraction
phaseOrder	integer_array	(no description available)
phaseRelPerm	real64_array3d	Phase relative permeability
phaseTrappedVolFraction	real64_array3d	Phase trapped volume fraction
phaseTypes	integer_array	(no description available)
volFracScale	real64	Factor used to scale the phase capillary pressure, defined as: one minus the sum of the phase minimum volume fractions.

Datastructure: VanGenuchtenCapillaryPressure

Name	Type	Description
dPhaseCapPressure_dPhaseVolFraction	real64_array4d	Derivative of phase capillary pressure with respect to phase volume fraction
phaseCapPressure	real64_array3d	Phase capillary pressure
phaseOrder	integer_array	(no description available)
phaseTypes	integer_array	(no description available)
volFracScale	real64	Factor used to scale the phase capillary pressure, defined as: one minus the sum of the phase minimum volume fractions.

Datastructure: WellControls

Name	Type	Description
currentControl	geosx_WellControls_Control	Current well control

Datastructure: WellElementRegion

Name	Type	Description
domainBoundaryIndicator	integer_array	(no description available)
ghostRank	integer_array	(no description available)
globalToLocalMap	geosx_mapBase< long long, int, std_integral_constant< bool, false > >	(no description available)
isExternal	integer_array	(no description available)
localToGlobalMap	globalIndex_array	Array that contains a map from localIndex to globalIndex.
wellControlsName	string	(no description available)
wellGeneratorName	string	(no description available)
elementSubRegions	node	Datastructure: elementSubRegions
neighborData	node	Datastructure: neighborData
sets	node	Datastructure: sets

Datastructure: WellElementRegionUniqueSubRegion

Name	Type	Description
domainBoundaryIndicator	integer_array	(no description available)
elementCenter	real64_array2d	(no description available)
elementVolume	real64_array	(no description available)
ghostRank	integer_array	(no description available)
globalToLocalMap	geosx_mapBase< long long, int, std_integral_constant< bool, false > >	(no description available)
isExternal	integer_array	(no description available)
localToGlobalMap	globalIndex_array	Array that contains a map from localIndex to globalIndex.
nextWellElementIndex	integer_array	(no description available)
nextWellElementIndexGlobal	integer_array	(no description available)
nodeList	geosx_InterObjectRelation< LvArray_Array< int, 2, camp_int_seq< long, 0l, 1l >, int, LvArray_ChaiBuffer > >	(no description available)
numEdgesPerElement	integer	(no description available)
numFacesPerElement	integer	(no description available)
numNodesPerElement	integer	(no description available)
radius	real64_array	(no description available)
topRank	integer	(no description available)
topWellElementIndex	integer	(no description available)
wellControlsName	string	(no description available)
ConstitutiveModels	node	Datastructure: ConstitutiveModels
neighborData	node	Datastructure: neighborData
sets	node	Datastructure: sets
wellElementSubRegion	node	Datastructure: wellElementSubRegion

Datastructure: commandLine

Name	Type	Description
beginFromRestart	integer	Flag to indicate restart run.
inputFileName	string	Name of the input xml file.
outputDirectory	string	Directory in which to put the output files, if not specified defaults to the current directory.
overridePartitionNumbers	integer	Flag to indicate partition number override
problemName	string	Used in writing the output files, if not specified defaults to the name of the input file.
restartFileName	string	Name of the restart file.
schemaFileName	string	Name of the output schema
suppressPinned	integer	Whether to disallow using pinned memory allocations for MPI communication buffers.
useNonblockingMPI	integer	Whether to prefer using non-blocking MPI communication where implemented (results in non-deterministic DOF numbering).
xPartitionsOverride	integer	Number of partitions in the x-direction
yPartitionsOverride	integer	Number of partitions in the y-direction
zPartitionsOverride	integer	Number of partitions in the z-direction

Datastructure: domain

Name	Type	Description
Neighbors	std_vector< geosx_NeighborCommunicator, std_allocator< geosx_NeighborCommunicator > >	(no description available)
partitionManager	geosx_PartitionBase	(no description available)
Constitutive	node	Datastructure: Constitutive
MeshBodies	node	Datastructure: MeshBodies

Datastructure: edgeManager

Name	Type	Description
domainBoundaryIndicator	integer_array	(no description available)
faceList	geosx_InterObjectRelation< LvArray_ArrayOfSets< int, int, LvArray_ChaiBuffer > >	(no description available)
ghostRank	integer_array	(no description available)
globalToLocalMap	geosx_mapBase< long long, int, std_integral_constant< bool, false > >	(no description available)
isExternal	integer_array	(no description available)
localToGlobalMap	globalIndex_array	Array that contains a map from localIndex to globalIndex.
nodeList	geosx_InterObjectRelation< LvArray_Array< int, 2, camp_int_seq< long, 0l, 1l >, int, LvArray_ChaiBuffer > >	(no description available)
neighborData	node	Datastructure: neighborData
sets	node	Datastructure: sets

Datastructure: elementRegionsGroup

Name	Type	Description

Datastructure: elementSubRegions

Name	Type	Description
WellElementRegionUniqueSubRegion	node	Datastructure: WellElementRegionUniqueSubRegion

Datastructure: embeddedSurfacesEdgeManager

Name	Type	Description
domainBoundaryIndicator	integer_array	(no description available)
faceList	geosx_InterObjectRelation< LvArray_ArrayOfSets< int, int, LvArray_ChaiBuffer > >	(no description available)
ghostRank	integer_array	(no description available)
globalToLocalMap	geosx_mapBase< long long, int, std_integral_constant< bool, false > >	(no description available)
isExternal	integer_array	(no description available)
localToGlobalMap	globalIndex_array	Array that contains a map from localIndex to globalIndex.
nodeList	geosx_InterObjectRelation< LvArray_Array< int, 2, camp_int_seq< long, 0l, 1l >, int, LvArray_ChaiBuffer > >	(no description available)
neighborData	node	Datastructure: neighborData
sets	node	Datastructure: sets

Datastructure: embeddedSurfacesNodeManager

Name	Type	Registered By	Description
domainBoundaryIndicator	integer_array		(no description available)
edgeList	geosx_InterObjectRelation< LvArray_ArrayOfSets< int, int, LvArray_ChaiBuffer > >		(no description available)
elemList	LvArray_ArrayOfArrays< int, int, LvArray_ChaiBuffer >		(no description available)
elemRegionList	LvArray_ArrayOfArrays< int, int, LvArray_ChaiBuffer >		(no description available)
elemSubRegionList	LvArray_ArrayOfArrays< int, int, LvArray_ChaiBuffer >		(no description available)
ghostRank	integer_array		(no description available)
globalToLocalMap	geosx_mapBase< long long, int, std_integral_constant< bool, false > >		(no description available)
isExternal	integer_array		(no description available)
localToGlobalMap	globalIndex_array		Array that contains a map from localIndex to globalIndex.
parentEdgeGlobalIndex	globalIndex_array		(no description available)
referencePosition	real64_array2d		(no description available)
parentEdgeIndex	integer_array	Datastructure: EmbeddedSurfaceGenerator	Index of parent edge within the mesh object it is registered on.
neighborData	node		Datastructure: neighborData
sets	node		Datastructure: sets

Datastructure: faceManager

Name	Type	Registered By	Description
domainBoundaryIndicator	integer_array		(no description available)
edgeList	geosx_InterObjectRelation< LvArray_ArrayOfArrays< int, int, LvArray_ChaiBuffer > >		(no description available)
elemList	integer_array2d		(no description available)
elemRegionList	integer_array2d		(no description available)
elemSubRegionList	integer_array2d		(no description available)
faceArea	real64_array		(no description available)
faceCenter	real64_array2d		(no description available)
faceNormal	real64_array2d		(no description available)
ghostRank	integer_array		(no description available)
globalToLocalMap	geosx_mapBase< long long, int, std_integral_constant< bool, false > >		(no description available)
isExternal	integer_array		(no description available)
localToGlobalMap	globalIndex_array		Array that contains a map from localIndex to globalIndex.
nodeList	geosx_InterObjectRelation< LvArray_ArrayOfArrays< int, int, LvArray_ChaiBuffer > >		(no description available)
facePressure_n	real64_array	Datastructure: CompositionalMultiphaseHybridFVM, Datastructure: SinglePhaseHybridFVM	Face pressure at the previous converged time step
mimGravityCoefficient	real64_array	Datastructure: CompositionalMultiphaseHybridFVM	Mimetic gravity coefficient
neighborData	node		Datastructure: neighborData
sets	node		Datastructure: sets

Datastructure: lassen

Name	Type	Description
Run	node	Datastructure: Run

Datastructure: meshLevels

Name	Type	Description
Level0	node	Datastructure: Level0

Datastructure: neighborData

Name	Type	Description

Datastructure: nodeManager

Name	Type	Description
ReferencePosition	real64_array2d	(no description available)
domainBoundaryIndicator	integer_array	(no description available)
edgeList	geosx_InterObjectRelation< LvArray_ArrayOfSets< int, int, LvArray_ChaiBuffer > >	(no description available)
elemList	LvArray_ArrayOfArrays< int, int, LvArray_ChaiBuffer >	(no description available)
elemRegionList	LvArray_ArrayOfArrays< int, int, LvArray_ChaiBuffer >	(no description available)
elemSubRegionList	LvArray_ArrayOfArrays< int, int, LvArray_ChaiBuffer >	(no description available)
faceList	geosx_InterObjectRelation< LvArray_ArrayOfSets< int, int, LvArray_ChaiBuffer > >	(no description available)
ghostRank	integer_array	(no description available)
globalToLocalMap	geosx_mapBase< long long, int, std_integral_constant< bool, false > >	(no description available)
isExternal	integer_array	(no description available)
localToGlobalMap	globalIndex_array	Array that contains a map from localIndex to globalIndex.
primaryField	real64_array	Primary field variable
neighborData	node	Datastructure: neighborData
sets	node	Datastructure: sets

Datastructure: quartz

Name	Type	Description
Run	node	Datastructure: Run

Datastructure: sets

Name	Type	Description
externalSet	LvArray_SortedArray< int, int, LvArray_ChaiBuffer >	(no description available)

Datastructure: wellElementSubRegion

Name	Type	Description
domainBoundaryIndicator	integer_array	(no description available)
ghostRank	integer_array	(no description available)
globalToLocalMap	geosx_mapBase< long long, int, std_integral_constant< bool, false > >	(no description available)
isExternal	integer_array	(no description available)
localToGlobalMap	globalIndex_array	Array that contains a map from localIndex to globalIndex.
location	real64_array2d	For each perforation, physical location (x,y,z coordinates)
numPerforationsGlobal	globalIndex	(no description available)
reservoirElementIndex	integer_array	For each perforation, element index of the perforated element
reservoirElementRegion	integer_array	For each perforation, elementRegion index of the perforated element
reservoirElementSubregion	integer_array	For each perforation, elementSubRegion index of the perforated element
wellElementIndex	integer_array	For each perforation, index of the well element
wellTransmissibility	real64_array	For each perforation, well transmissibility
neighborData	node	Datastructure: neighborData
sets	node	Datastructure: sets